Ion Vinyl Mot Handleiding

Ion DJ Gear Vinyl Mot

Lees hieronder de 📖 handleiding in het Nederlandse voor Ion Vinyl Mot (32 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

Quickstart Guide English ( 2 – 6 )

Guía de inicio rápido Español ( 7 – 11 )

Guide d'utilisation rapide Français ( 12 – 16 )

Guida rapida Italiano ( 17 – 21 )

Schnellstart-Anleitung Deutsch ( 22 – 26 )

Snelstartgids Nederlands ( 27 – 31 )

Vinyl Motion™

OFF

STOP

AUTO

OFF

STOP

AUTO

Quickstart Guide (English)

Introduction

Box Contents

Make sure that the items listed below are included in the box:

• Vinyl Motion™

• USB Cable

• Felt Slipmat

• 45 RPM Adapter

• Software CD

• Quickstart Guide

• Safety & Warranty Manual

Safety Information

• Not for use in rain or wet locations. Use only in dry locations.

• Play the turntable only on a level surface.

• The turntable cover must be open when playing records.

• Close the turntable cover when not playing records.

Support

For the latest information about this product (system requirements, compatibility information, etc.) and

product registration, visit ionaudio.com.

Connection Diagram

Items not listed under the Box Contents are sold separately.

Use the included USB cable to connect Vinyl Motion to (A) a 5V USB power adapter connected to a power

outlet or (B) your computer.

(A) (B)

Charge or

Power

Computer

USB Power

Adapter (not

included)

Features

1. Platter – Place your

record here.

2. 45 RPM Adapter Holder

– Holds the included 45

RPM adapter. When not

using the adapter, please

place it in this holder.

3. Tonearm – The fixed

tonearm can be raised

and lowered by hand, or

by pressing the raise /

lower lever.

4. Arm Clip – This specially

designed arm clip secures

the tonearm while at rest

or when not in use. The

arm clip has been

designed to remain in the

up position while

unlocked.

5. Raise / Lower Lever –

Raises and lowers the tonearm.

6. 33 / 45 / 78 Switch – This switch controls the RPM of

the turntable platter.

Note: For best results when playing 78 RPM vinyl

records, use a 78 stylus (sold separately). Only use a

78 stylus with 78 RPM vinyl records. Purchase the

iCT06rs 78 stylus at ionaudio.com/ict06rs.

7. Autostop switch – This switch turns autostop on or

off. When autostop is on, the platter will start spinning

when the tonearm is placed over the record and stop

spinning when the record has reached the end. (When

autostop is off, the platter will always spin regardless

of the position of the tonearm.)

Note: If your vinyl record stops before it reaches the

end of the music, turn Autostop to the off position for this particular

record. This is generally recommended for 45 RPM records.

8. Volume/Power Knob – To power on Vinyl Motion, turn this knob

clockwise until it clicks. When powered on, use this knob to adjust the

volume for the internal speakers and headphones. To turn off Vinyl

Motion, turn this knob counterclockwise until it clicks.

9. Headphone Output – Connect headphones here (sold separately) to listen to your vinyl.

10. Battery Charging Indicator – The LED will illuminate when charging the battery. The LED will turn off

once the battery is fully charged.

11. Power Indicator – This LED illuminates when the power is on and goes out when the battery power is

depleted.

12. Speaker – The record's audio will be played through this built-in speaker.

13. Aux Input – Connect a CD player, digital media player, or other audio source to this 1/8” stereo

auxiliary input.

14. RCA Output* – The audio from a playing vinyl record is sent to this line-level coaxial audio output. This

must not be connected to phono level devices.

15. USB Port – Use the included USB cable to connect your turntable to your computer. The USB

connection will send audio from the turntable to your computer. Please see the Using Vinyl Motion

With Your Computer section of this manual for information. Also, use the included USB cable to

connect Vinyl Motion to a USB power adapter connected to a power outlet or your computer.

IMPORTANT: Remove the plastic cartridge

cover (needle cover) before operating the

turntable.

*WARNING: The RCA outputs are LINE level.

Please only connect these to LINE level

inputs. You may damage your receiver if you

plug in a LINE level device into a PHONO

level input.

14 15

OFF

ST OP

AUT O

IMPORTANT: Place the included felt slipmat

on the platter; then place your record on the

felt slipmat to carefull

hold

our records.

Product specificaties

Merk:	Ion
Categorie:	DJ Gear
Model:	Vinyl Mot
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Snelstartgids:	Ja
Ondersteunt Windows:	Ja
Ondersteunt Mac-besturingssysteem:	Ja
Nominale snelheid:	33 1/3, 45, 78 RPM