Ion RECORD 2 PC Handleiding

Ion Geluid RECORD 2 PC

Lees hieronder de 📖 handleiding in het Nederlandse voor Ion RECORD 2 PC (16 pagina's) in de categorie Geluid. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

RECORD 2 PC

QUICKSTART GUIDE

ENGLISH ( 3 – 4 )

MANUAL DE INICIO RÁPIDO

ESPAÑOL ( 5 – 6 )

GUIDE D'UTILISATION SIMPLIFIÉ

FRANÇAIS ( 7 – 8 )

GUIDA RAPIDA

ITALIANO ( 9 – 10 )

KURZANLEITUNG

DEUTSCH ( 11 – 12 )

SNELSTARTGIDS

NEDERLANDS ( 13 – 14 )

RECORD 2 PC QUICKSTART GUIDE

CONNECTING THE RECORD 2 PC

The ION Audio RECORD 2 PC is a plug-and-play device, which means that there are

no drivers to install. The first time you connect it to your computer, it will

automatically install all the necessary driver components and be ready to use.

IMPROVING AUDIO QUALITY

If you are experiencing unexpected noise, hiss or distortion in your recordings, here are a few things you can do to improve

the quality of your sound as you use RECORD 2 PC:

• Use higher-quality RCA cables when connecting your sound source to RECORD 2 PC.

• Connect RECORD 2 PC to a different USB port on your computer. (USB ports on the rear panel typically work best.)

• Close all software applications other than your recording application (e.g., EZ Vinyl/Tape Converter).

• If you are using a laptop, disconnect your laptop's power supply.

• Experiment with connecting your computer and/or sound source to different power outlets (or the same power outlet).

• Experiment with repositioning RECORD 2 PC and other audio cables away from possible noise sources (e.g.,

computers, power cables, speakers, amps, etc.)

• Ensure the connections between all your devices are secure (including the grounding wire of your record player, if it

has one).

• Visit www.ionaudio.com/computer-optimization for more information on optimizing your computer for audio.

AUDIO SETUP

In most cases (especially if you are using Windows) RECORD 2

PC will be automatically selected as your computer's default

recording device. If you find you are unable to record any audio

with RECORD 2 PC, follow the instructions below for your

operating system.

Also, be sure your audio software program is set up to receive

audio via RECORD 2 PC. This can usually be done in your

software's "Preferences" or "Device Setup." Please consult your

software manual for more information.

WINDOWS XP

1. Go to Start Menu  Control Panel  Sounds

and Audio Devices.

2. Click the "Audio" tab.

3. Under "Sound Recording," make sure USB

Audio CODEC is selected as the default device,

then click "OK."

WINDOWS VISTA

1. Go to Start Menu  Control Panel  Sound.

(If you don't see Sound, select "Switch to Classic

View," and the Sound Control Panel should

become available.)

2. Select the "Recording" tab.

3. Make sure Microphone – USB Audio CODEC is

set as the default device, then click "OK."

SYSTEM REQUIREMENTS:

y PC: Windows XP, Vista or 7

y Mac: OS X or higher

y USB Port

IMPORTANT:

• Adjust the volume dial (on the side of

RECORD 2 PC) to prevent distortion at loud

volumes.

• When using RECORD 2 PC with turntables,

set its switch to "PHONO." When using it with

Product specificaties

Merk:	Ion
Categorie:	Geluid
Model:	RECORD 2 PC
Kleur van het product:	Zwart
Snoerlengte:	2 m
Stroombron:	USB
Vormfactor:	Desktop
Audio-ingangen:	USB2.0
Audio-uitgang:	RCA
Aantal per verpakking:	1 stuk(s)
Aansluiting:	USB
Compatibele besturingssystemen:	- Windows XP, Vista (32/64-bit), 7 (32/64-bit)\n- MAC OS X 10.4, 10.5, 10.6, 10.7 (Lion)
Aansluiting(en):	USB2.0, 2x RCA
Minimale systeemeisen:	- PC: Pentium 4 CPU 1GHz, 1GB RAM, 300MB HDD, USB 1.1 / 2.0, CD-ROM\n- MAC: G4 PPC / Intel CPU 1GHz, 1GB RAM, 300MB HDD, USB 1.1 / 2.0, CD-ROM
Contact geleider materiaal:	Nikkel
Geslacht connector:	Mannelijk/Mannelijk
Aansluiting 2:	RCA