Ion ANYROOM Handleiding

Ion Ipod Audio ANYROOM

Lees hieronder de 📖 handleiding in het Nederlandse voor Ion ANYROOM (16 pagina's) in de categorie Ipod Audio. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

ANYROOM

QUICKSTART GUIDE

ENGLISH ( 3 – 4 )

MANUAL DE INICIO RÁPIDO

ESPAÑOL ( 5 – 6 )

GUIDE D'UTILISATION SIMPLIFIÉ

FRANÇAIS ( 7 – 8 )

GUIDA RAPIDA

ITALIANO ( 9 – 10 )

KURZANLEITUNG

DEUTSCH ( 11 – 12 )

SNELSTARTGIDS

NEDERLANDS ( 13 – 14 )

QUICKSTART

CONNECTION DIAGRAM

FEATURES

1. POWER IN – Connect the included power cable to this

jack then connect the cable to your power source.

2. VOLTAGE SELECTOR – This 2-position switch sets the

AC input voltage for the speaker. U.S. users should set

this switch to "115V" whereas U.K. and most European

users will need to set this to "230V".

3. POWER ON/OFF SWITCH – Turns ANYROOM on or

off.

4. LINE INPUT – This stereo RCA input can be used to

connect a CD player, MP3 player, or other audio source.

To connect to a portable device with a 1/8" (3.5mm)

headphone jack, you will need a standard 1/8"-to-RCA

adapter (not included).

5. LINE OUTPUT – To play your music out of an additional

speaker, connect this stereo RCA output to a second

speaker's stereo RCA input so you can play your music out of both. To do this, you will need a standard stereo RCA

cable (not included).

6. MASTER VOLUME – This knob controls ANYROOM's volume.

7. BOOT – This LED will illuminate when ANYROOM is on.

8. STATUS – This LED will blink approximately once every five seconds when ANYROOM's transmitter and speaker are

properly synced. When the SYNC button is pressed, this LED will blink rapidly, then blink approximately once per second

during the sync process.

9. SYNC – Press this button to make the speaker search for ANYROOM transmitters in the area.

Note: Do not remove the speaker grille.

USING ANYROOM

1. Follow the instructions in the CONNECTION DIAGRAM to set up your ANYROOM speaker properly.

2. Be sure the volume levels of ANYROOM and your device(s) are turned to "zero."

3. Connect the device(s) you want to play:

a. iPod, iPhone*, or iPad*: Gently connect your iPod to the included transmitter (wireless module).

b. CD player (or other device with an RCA output): Use a standard stereo RCA cable (not included) to connect

your device to ANYROOM's LINE INPUT. Be sure to match the colors of the cable's plugs to their respective jacks

(red to red, white to white).

4. Turn on your device, then turn on ANYROOM's POWER SWITCH. The transmitter and speaker should sync up

automatically. (If they do not sync, see the manual sync instructions below.)

5. Play your device, and turn up its volume. Turn up ANYROOM's MASTER VOLUME.

To manually sync ANYROOM's transmitter and speaker:

Follow these steps if ANYROOM's transmitter and speaker do not automatically sync after powering on. You can also use these

steps to sync multiple ANYROOM speakers to the same transmitter.

1. Press and hold the transmitter's SYNC button (using a paperclip or pen). Its red LED will blink rapidly.

2. Within five seconds, press the speaker's SYNC button. Its STATUS LED will blink rapidly.

3. Wait a minute or two – the transmitter and speaker should sync automatically. Their LEDs should blink only about once

every five seconds when the dock and speaker are properly synced. Once synced properly, they should do sync

automatically when you turn on ANYROOM's power in the future.

You are cautioned that changes or modifications not expressly approved to a part responsible for compliance could void the

user’s authority to operate the equipment.

iPod*

(not included)

Power

* iPo

, iPhone, and iPa

trademarks of Apple, Inc., registered i

the U.S.A. and other countries.

CD player

(not included)

To LINE INPUT of second

ANYROOM speaker (sold

separately). BOX CONTENTS

 ANYROOM speaker

 ANYROOM transmitter

(wireless module)

 Power cable

 Quickstart Guide

 Safety Instructions & Warranty

Information Booklet

123

4455 69

Transmitter

(wireless module)

Product specificaties

Merk:	Ion
Categorie:	Ipod Audio
Model:	ANYROOM
Kleur van het product:	Zwart
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad en draadloos
Type stroombron:	AC
Gemiddeld vermogen:	32 W
Volumeregeling:	Draaiknop
Certificering:	CE, FCC
Ingang stroom:	Ja
Audio-ingangen:	RCA
Equalizer-instellingen:	Nee
Aanbevolen gebruik:	Universeel
Impedantie:	- Ohm
Geschikt voor buitengebruik:	Nee
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Aantal drivers:	2
Frequentiebereik:	33 - 20000 Hz
Compatibele producten:	iPod, iPhone, iPod touch, Mac
Compatibiliteit:	Apple
Luidspreker soort:	1-weg
Audio RCA-ingangen:	1
RF-connectiviteit:	Ja
Uitvoer:	RCA