Ion Air LP System Handleiding

Ion Audiosysteem Air LP System

Lees hieronder de 📖 handleiding in het Nederlandse voor Ion Air LP System (44 pagina's) in de categorie Audiosysteem. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/44
Quickstart Guide English ( 2 – 8 )
Guía de inicio rápido Español ( 9 – 15 )
Guide d'utilisation rapide Français ( 16 – 22 )
Guida rapida Italiano ( 23 – 29 )
Schnellstart-Anleitung Deutsch ( 30 – 36 )
Snelstartgids Nederlands ( 37 – 43 )
Air LP™System
2
Quickstart Guide (English)
Introduction
Box Contents
Make sure that the items listed below are included in the box:
• Air LP™
• Air LP Speaker
• Air LP Power Adapter
• Air LP Speaker Power Adapter
• Dust Cover
• USB Cable
• RCA Cable
• 1/8” (3.5 mm) Aux Cable
• 45 RPM Adapter
• Felt Slipmat
• Software CD
• Quickstart Guide
• Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information, etc.) and
product registration, visit ionaudio.com.
Connection Diagram
Items not listed under the Box Contents are sold separately.
Air LP Features
1. Platter – Place your record here.
2. 45 RPM Adapter Holder – Holds the included 45
RPM adapter. When not using the adapter,
please place it in this holder.
3. Tonearm – The fixed tonearm can be raised and
lowered by hand, or by pressing the raise / lower
lever.
4. Arm Clip – This specially designed arm clip
secures the tonearm while at rest or when not in
use. The arm clip has been designed to remain in
the up position while unlocked.
Air LP Speaker
Music Device
(optional)
1
23
4
5
7
6
8
9
10
11
Power
3
5. Raise / Lower Lever – Raises and
lowers the tonearm.
6. 33 / 45 / 78 Switch – This switch
controls the RPM of the turntable
platter.
Note: For best results when playing 78 RPM
vinyl records, use a 78 stylus (sold separately).
Only use a 78 stylus with 78 RPM vinyl records.
Purchase the iCT06rs 78 stylus at
ionaudio.com/ict06rs.
7. Autostop switch – This switch turns autostop
on or off. When autostop is on, the platter will
start spinning when the tonearm is placed over
the record and stop spinning when the record
has reached the end. (When autostop is off, the
platter will always spin regardless of the
position of the tonearm.)
Note: If your vinyl record stops before it
reaches the end of the music, turn Autostop to
the off position for this particular record. This is generally recommended for 45 RPM
records.
8. Headphone Jack – Connect headphones (sold separately) to listen to your vinyl
playback.
9. Bluetooth Button – Press this button to start Bluetooth pairing. If after 5 minutes no
Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become
inactive, and the LED will turn off. If currently connected, press this to disconnect from a
currently connected Bluetooth device.
10. Bluetooth LED – This LED blinks when pairing with a Bluetooth device. Once fully paired,
the LED will remain solid. The LED will be off when Bluetooth is inactive, and when the Air
LP is turned off.
11. Volume – Adjust this to control the headphone level.
12. RCA Output* – The audio from a playing vinyl record is sent to this line-level RCA audio
output. This must not be connected to phono level devices.
13. USB Audio Output – Use the included USB cable to connect your turntable to your
computer. The USB connection will send audio from the turntable to your computer.
Please see the Using Air LP With Your Computer section of this manual for information.
14. Power Cable Input – Use the included adapter to connect to wall power.
15. Power Button – Press this button to turn Air LP on/off. Air LP Turntable will re-connect to
your last used Bluetooth Speaker when powering on, if it is in range.
16. Aux Input – Connect a CD player, digital media player, or other audio source to this 1/8”
stereo auxiliary input. The audio from the Aux Input is also transmitted over a Bluetooth
connection.
IMPORTANT: Remove the plastic
cartridge cover (needle cover) before
operating the turntable.
*WARNING: The RCA outputs are LINE
level. Please only connect these to LINE
level inputs. You may damage your
receiver if you plug in a LINE level device
into a PHONO level input.
12 13
14
15
16
IMPORTANT: Place the included felt
slipmat on the platter; then place your
record on the felt slipmat to carefully hold
your records.

Product specificaties

Merk: Ion
Categorie: Audiosysteem
Model: Air LP System

Heb je hulp nodig?

Als je hulp nodig hebt met Ion Air LP System stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Audiosysteem Ion

Ion

Ion Complete LP Handleiding

22 Oktober 2022
Ion

Ion OMNI PLAY Handleiding

22 Oktober 2022
Ion

Ion Duo Deck Handleiding

22 Oktober 2022
Ion

Ion Air LP Handleiding

22 Oktober 2022
Ion

Ion Air LP System Handleiding

22 Oktober 2022
Ion

Ion CD Direct Handleiding

22 Oktober 2022

Handleiding Audiosysteem

Nieuwste handleidingen voor Audiosysteem

Omnitronic

Omnitronic BOB series Handleiding

9 Oktober 2023
Tascam

Tascam if-fw dm FIRE WIRE Handleiding

8 Oktober 2023
Tascam

Tascam 202MKVI Handleiding

8 Oktober 2023
Proline

Proline cd1504usb Handleiding

5 Oktober 2023
Monitor

Monitor Vita Audio R4 Handleiding

5 Oktober 2023
Lenco

Lenco CR-2004 DAB Handleiding

4 Oktober 2023
Boston Acoustics

Boston Acoustics horizon trio Handleiding

1 Oktober 2023
Boston Acoustics

Boston Acoustics Horizon Trio XT Handleiding

1 Oktober 2023
Sweex

Sweex mm 111 Handleiding

27 September 2023
Telefunken

Telefunken BS 300 Handleiding

27 September 2023