Invicta Reserve 36657 Handleiding

Invicta Horloges Reserve 36657

Lees hieronder de 📖 handleiding in het Nederlandse voor Invicta Reserve 36657 (31 pagina's) in de categorie Horloges. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/31
INSTRUCT ON MANUALI AND WARRANTY
IMPORTANT THINGS TO KNOW
Screw Down Crowns: Many Invicta watches are equipped with a screw
down crown to help prevent water infiltration. This is most common on our
Diver models. In order to adjust the date and/or time on such a watch,
you must first unscrew the crown before you can gently pull it out to its
first or second click stop position (page 3). To do this, simply rotate the
crown counterclockwise until it springs open. When you have finished
setting the watch, the crown must then be pushed in and screwed back
in tightly. Not doing so will cancel the water resistance of the watch
and will void all warranties from the manufacturer. Overall, this process
should not require a lot of effort or force.
Tritnite® Luminous Markers: Tritnite® is an environmentally friendly
luminous material used exclusively by Invicta. Tritnite® requires 4 –5 hours
of exposure to light for it to glow brightly in the dark. It will continue to
perform with regular exposure to light.
THANK YOU FOR CHOOSING AN I TNVIC A TIMEPIECE
Long ago, we set out to continue Invicta’s original 1837 mission – to offer
magnificent Swiss timepieces at modest prices. In doing so, we gave birth
to a movement in the watch industry that is turning the balance of power
over to the consumer.
We hope you enjoy your new timepiece and carefully read the easy-to-use
instructions pertaining to it. By doing so, you will help give it a long life and
keep it operating at the high quality standards by which it was crafted.
These timepieces have been tested for water resistance. In order to maintain
the water resistance, be sure to always close the crown tightly after setting.
We also recommend having your timepiece checked every year by a certified
watchmaker to ensure the gaskets are in proper condition. This will help to
assure the precise operation and longevity of the piece. Please refer to our
Service Center information on our web site www.invictawatch.com.
1
QUARTZ, A M IC, UTO AT AND MANUAL W D WATIN CHES
Display Elements Control Buttons
QUARTZ, A M IC, UTO AT AN IND W MANUAL D WATCHES
A Quartz Watch is battery powered and does not require winding.
Eventually the battery will need to be replaced.
An Automatic Watch is a mechanical watch that winds itself and does
not require a battery. When worn daily, the movement of your wrist causes
the mainspring to wind progressively, eliminating the need for additional
winding. To start your automatic, you can hand wind it by rotating the
crown clockwise a number of turns while in its normal operating position
(screw down crowns will need to be unscrewedrst), or by swinging it side
to side for 30 seconds. We recommend housing an automatic in a watch
winder box.
A Manual Wind Watch is a mechanical watch that does not require a
battery, but can only be wound by hand. To wind it, turn the crown clock-
wise while it is in its normal operating position until you feel resistance.
This type of watch should be wound daily.
2
3
W S D I R D?HICH INSTRUCT ONSI HOUL EA
Invicta crafts many styles of watches using a variety of fine movements
and complications. To find the instructions for your particular timepiece,
simply look at it and answer one of the following questions:
Does it tell only?time ........................................................................10
Does it tell and time date? ...............................................................12
Does it tell time, day and date? ......................................................14
Does it have an ? alarm ......................................................................16
I ? s it a chronograph ........................................................................22
I ? s it a with andchronograph big date day .................................. 32
I , ? s it a with chronograph date day and month ............................ 42
Warranty Information ........................................................................50
Shipping Information ........................................................................ 54
ww w. invictawatch. c o m
8
9
WATCHES WITH , D TIME DAY AN DATE
Setting the Time, D Day and ate
1. Pull out the crown to position 1.
2. Turn the crown clockwise until you reach the correct
WATCHES WITH ALARM
Display Elements
Control Buttons
WATCHES WITH ALARM
Setting the ime and ateT D
1. Pull out the crown to position 1. The watch continues to run.
2. Turn the crown until yesterday’s date appears.
3. Pull out the crown to position 2. The second hand stops. The display
changes from alarm time to reference time.
4. Turn the crown until the correct date appears. Observe A PM clock M/
rhythm.
5. Continue to turn the crown until the correct time appears.
6. Push the crown back into position 0. The display changes from
reference to alarm time.
! PLE NOTE . ASE Resetting the time also requires the identical correction of
the reference time. Please refer to “setting the reference time”.
16
17
WATCHES WITH ALARM
Setting the ate . Quick ModeD
1. Pull out the crown to position 1. The watch continues to run.
2. Turn the crown until you reach the correct date. If you are setting the
date between 9pm and 12pm, the date must be set to the following
day as dates set between these hours do not automatically change at
midnight.
3. Push the crown back into position 0. The display changes from refer-
ence to alarm time.
! PLE NOTE . ASE Setting the date too quickly in quick mode can result in
the incorrect date being displayed. Switching the date between 01 and
31 restores the synchronization.
WATCHES WITH ALARM
Setting the Alarm
1. Press the push-button for at least 2 seconds. Until the small minute
hand jumps forward one minute and setting mode is activated.
Short pressing: Less than 1 second:
The reference time is moved forward by the minute.
Medium pressing: 1-2 seconds:
The reference time is moved forward by the hour.
Long pressing: Longer than 2 seconds:
The reference time is moved forward until the push-button is released.
2. Switch alarm O ON/ FF: Press the push-button briefly.
2 beeps: Alarm switched ON
1 beep: FFAlarm switched O
20
21
CHRONOGRAPHS
Display Elements
Control Buttons
CHRONOGRAPHS
Built-in stopwatch feature
A chronograph is a timepiece with a built-in stopwatch feature. With few
exceptions, Invicta chronographs tell the time, date and include three
subsidiary dials. These dials are often referred to as sub-dials, indicators,
counters, eyes or zones. Typically, they measure minutes, seconds and
tenths of a second.
The sub-dials that measure minutes and tenths of a second are part of the
stopwatch feature. The sub-dial that measures 60 seconds is in a constant
rotation and is also known as the small seconds.
22
23


Product specificaties

Merk: Invicta
Categorie: Horloges
Model: Reserve 36657

Heb je hulp nodig?

Als je hulp nodig hebt met Invicta Reserve 36657 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloges Invicta

Handleiding Horloges

Nieuwste handleidingen voor Horloges