Invicta Bolt Horloge Handleiding

Invicta Horloge Bolt Horloge

Lees hieronder de 📖 handleiding in het Nederlandse voor Invicta Bolt Horloge (31 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/31
INSTRUCTION MANUAL AND WARRANTY
IMPORTANT THINGS TO KNOW
Screw Down Crowns: Many Invicta watches are equipped with a screw
down crown to help prevent water infiltration. This is most common on our
Diver models. In order to adjust the date and/or time on such a watch,
you must first unscrew the crown before you can gently pull it out to its
first or second click stop position (page 3). To do this, simply rotate the
crown counterclockwise until it springs open. When you have finished
setting the watch, the crown must then be pushed in and screwed back
in tightly. Not doing so will cancel the water resistance of the watch
and will void all warranties from the manufacturer. Overall, this process
should not require a lot of effort or force.
Tritnite® Luminous Markers: Tritnite® is an environmentally friendly
luminous material used exclusively by Invicta. Tritnite® requires 4 –5 hours
of exposure to light for it to glow brightly in the dark. It will continue to
perform with regular exposure to light.
THANK YOU FOR CHOOSING AN INVICTA TIMEPIECE
Long ago, we set out to continue Invicta’s original 1837 mission – to offer
magnificent Swiss timepieces at modest prices. In doing so, we gave birth
to a movement in the watch industry that is turning the balance of power
over to the consumer.
We hope you enjoy your new timepiece and carefully read the easy-to-use
instructions pertaining to it. By doing so, you will help give it a long life and
keep it operating at the high quality standards by which it was crafted.
These timepieces have been tested for water resistance. In order to maintain
the water resistance, be sure to always close the crown tightly after setting.
We also recommend having your timepiece checked every year by a certified
watchmaker to ensure the gaskets are in proper condition. This will help to
assure the precise operation and longevity of the piece. Please refer to our
Service Center information on our web site www.invictawatch.com.
1
QUARTZ, AUTOMATIC, AND MANUAL WIND WATCHES
Display Elements Control Buttons
QUARTZ, AUTOMATIC, AND MANUAL WIND WATCHES
A Quartz Watch is battery powered and does not require winding.
Eventually the battery will need to be replaced.
An Automatic Watch is a mechanical watch that winds itself and does
not require a battery. When worn daily, the movement of your wrist causes
the mainspring to wind progressively, eliminating the need for additional
winding. To start your automatic, you can hand wind it by rotating the
crown clockwise a number of turns while in its normal operating position
(screw down crowns will need to be unscrewed first), or by swinging it side
to side for 30 seconds. We recommend housing an automatic in a watch
winder box.
A Manual Wind Watch is a mechanical watch that does not require a
battery, but can only be wound by hand. To wind it, turn the crown clock-
wise while it is in its normal operating position until you feel resistance.
This type of watch should be wound daily.
2
3


Product specificaties

Merk: Invicta
Categorie: Horloge
Model: Bolt Horloge

Heb je hulp nodig?

Als je hulp nodig hebt met Invicta Bolt Horloge stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Invicta

Handleiding Horloge

Nieuwste handleidingen voor Horloge