Intex 66705E Handleiding

Intex Bed 66705E

Lees hieronder de 📖 handleiding in het Nederlandse voor Intex 66705E (4 pagina's) in de categorie Bed. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

151

(151) AP619A BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 07/12/2011

151

(151) AP619A BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 07/12/2011

READ AND SAVE THESE INSTRUCTIONS

Page 1

READ AND SAVE THESE INSTRUCTIONS

Page 2

PARTS REFERENCE

Part Descriptions:

1. AC line cord

2. Switch

3. Inflation mark ( )

4. Deflation mark ( )

5. Air passage & control

dial valve

6. Control dial

7. Cord compartment cover

8. Airbed

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT

INTEX®OWNER'S MANUAL

Built-in Fast-Fill™ Electric Pump

Model AP619A 110 – 120 V~ 60 Hz 0.9 A

SERVICING OF A DOUBLE-INSULATED PRODUCT:

In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding

means is provided on a double-insulated product, nor should a means for grounding be added to the product.

151-***-R0-1207

To reduce the risk of burns, fire, electric shock, or injury to persons:

•

NEVER PLACE AN INFANT TO SLEEP ON AIR MATTRESSES.

•

Never introduce any flammable substance into the inflatable airbed, SUCH AS AEROSOL TIRE REPAIR

PRODUCTS, as it may ignite or explode.

•For indoor household use only.

•Unplug from outlet before putting on or taking off parts.

•

Close supervision is necessary when this furnishing is used by, or near children, invalids, or disable persons.

•Use this furnishing only for its intended use as described in these instructions. Do not use attachments

not recommended by the manufacturer.

•Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

•This is not a toy. Children must not be left unattended when using the airbed.

•Keep the storage bag away from babies and children. The storage bag is not a toy. When not in use,

fold the bag and put it away out of the reach of children.

•Do not walk, stand on or jump on or use the airbed as a trampoline.

•Do not use on or near water. This is not a raft.

•Do not set up bed near stairs, doors, sharp edges or breakable objects. Provide adequate space

between bed and objects to avoid entrapment.

•Make sure the area is flat, smooth, free of sharp objects that could puncture the bed and keep away

from ledges.

•Keep pets away from the airbed. Pets may puncture the surface of the bed.

•Avoid sleeping on the edge of the airbed. Edges produce less support than the middle of the bed.

•Do not operate air pump for more than 10 minutes at a time. Let pump cool at least 10 minutes between

uses.

•Unplug electrical power cord when not in use. To disconnect, turn all controls to the off position, then

remove plug from outlet.

•Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and

the like. Never drop or insert object into any opening.

•Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been

dropped or damaged, or dropped into water. Return the furnishing to a service center for examination

and/or repair.

•If the AC supply cord is damaged, it must be replaced by the manufacturer or its service agent in order

to avoid a hazard.

•Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do

not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not

be tripped over. Keep the cord away from heated surfaces.

FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID SUFFOCATION,

PROPERTY DAMAGE, ELECTRIC SHOCK, BURNS OR OTHER INJURY.

WARNING

INFLATION

1. Open line cord compartment cover. See Fig .(1)

2. Plug in the AC line cord into an AC electrical outlet. See Fig .(2)

3. Turn the control dial clockwise until arrow points to the inflation mark ( ). See

Fig .(3)

4. Press "I" to switch ON. See Fig .(4)

5. When the airbed is fully inflated to the desired firmness, press "O" to switch OFF. See

Fig .(5)

FIG (1) FIG (2)

220 – 240 V 110 – 120 V

√

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.

•To reduce the risk of electric shock or injury, use indoors only, do not expose to rain. Store indoors.

CAUTION

•

To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning.

DANGER

Servicing of a double-insulated product requires extreme care and knowledge of the system, and

should be done only by qualified service personnel. Replacement parts for a double-insulated product

must be identical to those parts in the product.

A double-insulated product is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED"

and with the symbol .

INSTRUCTIONS

General

•

This appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized

outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact

a qualified electrician to install the proper outlet. Do not change the plug in any way.

•

No air pump maintenance is required.

•

For cleaning use only mild soapy solution. Do not use any chemicals.

•

In case of repairs, use only common PVC repair glue and patches.

151

(151) AP619A BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 07/12/2011

151

(151) AP619A BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 07/12/2011

READ AND SAVE THESE INSTRUCTIONS

Page 3

READ AND SAVE THESE INSTRUCTIONS

Page 4

6. Lie down on the airbed to test the firmness.

7. If the sleeping surface is too hard, adjust the firmness

by turning the control dial counterclockwise gradually

until air starts to exit through the air passage. See

Fig . Turn the control dial fully clockwise when the(6)

desired firmness is achieved. See Fig . If the airbed(7)

becomes too soft repeat step #3 thru #7 as necessary.

8. Disconnect the AC line cord from the wall socket,

place it inside the cord compartment and close the

cover.

FIG (6)

FIG (7)

Proper inflation of the airbed.

The ambient temperatures of air have an effect on the airbed internal pressure. At low

ambient temperature the air will contract within the airbed and the airbed will feel softer:

add air as necessary. At high ambient temperature the air within the airbed will expand

significantly and the airbed will become hard and may burst: release air to avoid damage

to the airbed or to soften the feel. expose the airbed to extreme temperatures (hotDo not

or cold).

Stretching is a natural characteristic of new vinyl. During initial use, the airbed may

become soft and require additional inflation to maintain desired firmness. This is normal for

the first few days of use.

Dimensions shown are approximate and will vary due to the vinyl temperature and the air

temperature.

In no event shall Intex, their authorized agents or employees be liable for damages

(such as pin holes) to the airbed caused by negligence, ordinary wear and tear,

abuse and carelessness, or external forces.

IMPORTANT NOTE

DEFLATION

1. Open line cord compartment cover. See Fig .(1)

2. Plug in the AC line cord into an AC electrical outlet. See Fig .(2)

3. Turn the control dial counterclockwise until arrow points to deflation mark ( ). See

Fig .(8)

FIG (9)FIG (8)

Mar ke ti ngL td.

Lon gB eac h,CA 908 01-14 40U SA

countrie sof th

eworld by I

nte

rad ing Ltd .,und erlic ens efro

nt e

de ma

susedins o

2004 I

nte x

e cr eat ion Cor

p.,

dein Chi n

/F a

briqu een Chi ne/H ech oen Chin a

FIG (10)

INFLATION OPTION

1. If electrical power is not available then a conventional foot

or manually operated air pump can be connected to the

control dial valve for inflation. See Fig .(11)

2. Turn the control dial clockwise until arrow points to the

inflation mark ( ).

3. Insert air pump nozzle to the control dial valve to inflate the

airbed. FIG (11)

Inflate only with a low pressure inflator. Do not over inflate. Fill with cold air only.

IMPORTANT

STORAGE

1. Deflate the airbed following the "DEFLATION" instructions.

2. Turn the control dial counterclockwise until arrow points to deflation mark ( ). See

Fig .(8)

3. Make sure the airbed is clean and dry.

4. Lay bed flat with sleeping surface facing upwards and follow the folding steps on Figs

(12 - 16). Fold the airbed loosely and avoid sharp bends, corners and creases which can

damage the airbed.

INTEX

FIG (12) FIG (13) FIG (14)

FIG (15) FIG (16)

5. Turn the control dial fully clockwise. See Fig (10).

6. Place the airbed inside the storage bag and store in a dry, cool storage location.

Made in China/Fabriqué en Chine/Hecho en China/Hergestellt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas

utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex

Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the

European Union by/Distribué dans l’Union Européenne par/Distr ibuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., P.O.

Box nr. 1075 – 4700 BB Roosendaal – The Netherlands Consumer Service 1-800-234-6839

4. Press "I" to switch ON. See Fig .(4)

5. When the airbed is completely deflated, begin rolling the airbed from the foot of

the airbed towards the head of the airbed where the pump is located. See Fig .(9)

6. When all air is removed from the airbed, press "O" to switch OFF. See Fig .(5)

7. Turn the control dial fully clockwise. See Fig .(10)

8. Disconnect the AC line cord from the wall socket, place it inside the cord compart

ment and close the cover.

FIG (5)FIG (4)FIG (3)

Ma rke ting Ltd .

Lo ng Be ach, CA 908 01- 144 0US A

cou ntr ies oft

hew orld by I

nt e

ra din gL td., unde rlic e

nsef ro

nt e

suse din so m

200 4

nte

crea tion Cor

ade inChin

a/F

briquee nChin e/Hech oen Chin

Product specificaties

Merk:	Intex
Categorie:	Bed
Model:	66705E
Kleur van het product:	Houtskool
Hoogte:	470 mm
Soort:	Tweepersoonsmatras
Geschikt voor:	Binnen & buiten
Vorm:	Rechthoek
Aanbevolen leeftijdscategorie:	Volwassenen
Aanbevolen geslacht:	Unisex
Ingebouwde luchtpomp:	Nee
Intrastatcode:	66705E