Intermec EasyCoder PF2i Handleiding

Intermec Labelprinter EasyCoder PF2i

Lees hieronder de 📖 handleiding in het Nederlandse voor Intermec EasyCoder PF2i (14 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

3400, 4420, and 4440 Cutter

P/N 066391-001

User’s Manual

Intermec Technologies Corporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. service and technical support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian service and technical support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

 1998 by Intermec Technologies Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, Antares, Adara, Duratherm,

EZBuilder, Precision Print, PrintSet, Virtual Wedge, and CrossBar are either trademarks or

registered trademarks of Intermec Technologies Corporation. Throughout this manual, trademarked

names may be used. Rather than put a trademark ( or ) symbol in every occurrence of a

trademarked name, we state that we are using the names only in an editorial fashion, and to the

benefit of the trademark owner, with no intention of infringement.

Introduction to the Cutter

This manual explains how to install and clean the cutter on your 3400, 4420, or 4440

printer. It also explains how to enable the cutter using PrintSet.

Introduction to the Cutter

With the cutter on your 3400, 4420, or 4440 printer, you can cut media into

individual labels of the same or random lengths that are ready for use. The

cutter blade is capable of cutting a wide range of die cut roll, continuous roll, or

fanfold media; however, the cutter performs best with 7- to 10-mil thickness tag

stock.

The cutter is mounted externally on the printer and cannot be used in

conjunction with the self-strip/batch takeup option.

Note: If you use the cutter on adhesive backed materials, cut the liner between the

labels. Cutting through adhesive is not recommended. You will need to clean the cutter

every 10,000 cuts or when it fails to cut cleanly if you cut through adhesive backed

material.

Cutter Parts and Function

The following table describes the parts and function of the cutter and how they

connect to the printer.

Name Description

Mounting plate Attaches the cutter to the printer. The mountin

plate has a

sprin

mounted hin

e that allows the cutter to swin

down so

that media can be fed easily through the cutter.

Cutter cable Powers and sends commands from the main PCB to the cutter.

Cutter connector Connects the cutter cable to the main PCB.

Cutter cover Prevents fin

ers from comin

into contact with the cutter blade.

It opens easily for cleaning.

Cutter blade Cuts the media when the printer reaches the end of the label.

Thumbscrews Attach the mountin

plate to the cutter and the cutter to the

mounting plate.

Product specificaties

Merk:	Intermec
Categorie:	Labelprinter
Model:	EasyCoder PF2i
Kleur van het product:	Zilver
Gewicht:	5500 g
Breedte:	178 mm
Diepte:	367 mm
Hoogte:	194 mm
Stroomvoorziening:	90 - 265 VAC, 45 - 65Hz
Stroomverbruik (in standby):	15 W
Intern geheugen:	16 MB
Temperatuur bij opslag:	-20 - 70 °C
Maximum intern geheugen:	1 GB
Ondersteunde netwerkprotocollen:	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Printsnelheid:	8 lpm
Maximale resolutie:	203 x 203 DPI
Mediadikte:	3.0 - 7.5 mm
Maximum roll diameter:	152.4 /213 mm
Bedrijfstemperatuur, bereik:	40 - 104 °F
Standaard interfaces:	RS-232, USB 2.0
Gemiddeld stroomverbruik tijdens printen:	300 W
Printsnelheid (metrisch):	200 mm/sec
Maximale label breedte:	56 mm
Mediaformaten (lade 1):	60 mm
Bedrijfstemperatuur (T-T):	5 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Maximale label lengte:	0.4 m
Afsnijden:	Automatisch