Intellinet 507332 Handleiding

Intellinet Audio/video-converter 507332

Lees hieronder de 📖 handleiding in het Nederlandse voor Intellinet 507332 (16 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

FAST ETHERNET

MEDIA CONVERTER

INSTRUCTIONS

MODELS 506502, 506519, 507332

INT-506502/506519/507332-UM-ML1-1015-02

Important: Read before use. • Importante: Leer antes de usar.

intellinetnetwork.com

ENGLISH

Fast Ethernet Media Converter English

Thank you for purchasing the Intellinet Fast Ethernet Media

Converter. Media converters connect two Ethernet networks over

a longer distance using ﬁber optic cable.

MODELS

• 506502:

Fast Ethernet Media Converter

10/100Base-TX to 100Base-FX (SC) Multimode, 2 km (1.24 mi.)

•506519:

Fast Ethernet Media Converter

10/100Base-TX to 100Base-FX (ST) Multimode, 2 km (1.24 mi.)

•507332:

Fast Ethernet Single Mode Media Converter

10/100Base-TX to 100Base-FX (SC) Single Mode, 20 km (12.4 mi.)

CONNECTIONS

TwistedPair–RJ45

Connect the UTP port of the media converter to an RJ45 port on

the network; e.g., to an Ethernet switch. Cat5e or better cabling is

recommended.

Fiber Optic

As shown above, two ﬁber optic cables need to be connected be-

tween two ideally identical media converters. Make a connection

MediaConverter1

MediaConverter2

RJ45

TX RX

OPTICAL FIBER

ETHERNET1 ETHERNET2

Twisted Pair

ENGLISH 3

from Media Converter 1 TX to Media Converter 2 RX, and from

Media Converter 1 RX to Media Converter 2 TX. Maximum length

and ﬁber cable speciﬁcation depend on the model. (See Models.)

POWER

Plug the power adapter into the 5 V DC input jack on the media

converter, then connect it to a regular power outlet. Only use

the included power adapter or one with matching speciﬁcations

(output of 5 V DC, at least 1 A).

LEDS

PWR – The power adapter is connected when lit.

100M – 100 Mbps link on the twisted pair connection when lit;

10 Mbps link or no link if unlit.

Link/Act(TP=RJ45;FP=Fiber) – Active link when lit; data traﬃc

when ﬂashing; no active network link when unlit.

FDX/COL(forTP/RJ45) – Full duplex connection when lit; data

collisions when ﬂashing; half duplex when unlit.

SD(forFP/Fiber) – Fiber optic signal is detected when lit; no

signal when unlit.

For speciﬁcations, go to intellinetnetwork.com.

Product specificaties

Merk:	Intellinet
Categorie:	Audio/video-converter
Model:	507332
Gewicht:	180 g
Breedte:	70 mm
Diepte:	105 mm
Hoogte:	26 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Metaal
LED-indicatoren:	Activity, Link, Power
Stroom:	1 A
Inclusief AC-adapter:	Ja
Vermogensverbruik (max):	5 W
Certificering:	FCC B, CE
Ingangsspanning:	5 V
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Netwerkstandaard:	IEEE 802.3, IEEE 802.3u
Temperatuur bij opslag:	-45 - 70 °C
Intern:	Nee
Golflengte:	1310 nm
Externe adapter:	Ja
Gevoeligheid:	-32 dBmW
Ethernet interface type:	Fast Ethernet
Mean time between failures (MTBF):	100000 uur
Maximale overdrachtssnelheid van gegevens:	100 Mbit/s
Auto MDI/MDI-X:	Ja
Maximaal bereik:	20000 m
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Code geharmoniseerd systeem (HS):	85176990
Vezel-optische connector:	SC
Converter input interface:	100BASE-FX, 100Base-TX
Duplex systeem:	Volledig
Converter output interface:	100Base-FX
Draad modus structuur:	Single-mode