Inovonics EN7017 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Inovonics EN7017 (5 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 81 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
EN7017 Survey Kit and App Installation
and Site Survey Instructions
Use a mini USB charging cable and any standard USB charger to fully
charge the survey receiver. The LED will light red while charging, and
turn off when fully charged.
3. Download and open the Site Survey App by Inovonics.
Select the Inovonics device that matches the MAC add the ress on
back of your survey receiver to pair it with the app. Once paired,
the receiver LED will light green.
If located somewhere other than North America, select
your frequency band.
•Survey kit carrying case.
•EN4017SK survey receiver.
•EN1223SK pendant survey
transmitter.
•Mini USB charging cable.
Use a pen or a paper clip to move the switch up to activate the
survey receiver battery. The survey receiver battery can remain
activated indefi nitely, and once activated, the survey receiver LED
will blink green until paired.
Install the Survey Kit and App
02.02.17 06818B © Inovonics, 2017 - www.inovonics.com
Press the pendant survey transmitter activation button;
the LED will fl ash red.
Go to the display screen.
Enter the TXID found on the back of the pendant survey
transmitter to pair it with the app. Once paired,
the signal strength needles will begin to move, indicating
you have successfully completed setup.
02.02.17 06818B © Inovonics, 2017 - www.inovonics.com
Perform a Site Survey
Take the survey receiver and your mobile device to the
rst place you plan to install a transmitter.
Place the activated pendant survey transmitter where you plan to
install the Inovonics receiver.
If the average signal strength is green but the current signal
strength dips into the red, you may need a repeater; if the average
and current signal strength are red you will need a repeater.
Look at the app display. If the signal strength is green,
no repeater is needed.
Repeat steps 2 through 5 for each transmitter to be
installed.
If a repeater is needed, walk from the installation point back
towards the pendant survey transmitter. When the average and
current signal strength are consistently green, this is the best
location to place a repeater.
EN1223SK pendant
survey transmitter
Mobile device with
survey app
EN1223SK pendant
survey transmitter
Mobile device with
survey app
EN1223SK pendant
survey transmitter
Mobile device with
survey app
EN1223SK pendant
survey transmitter
Mobile device with
survey app
02.02.17 06818B © Inovonics, 2017 - www.inovonics.com


Product specificaties

Merk: Inovonics
Categorie: Bewakingscamera
Model: EN7017

Heb je hulp nodig?

Als je hulp nodig hebt met Inovonics EN7017 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Inovonics

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera