ILive ITB037 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor ILive ITB037 (2 pagina's) in de categorie Home cinema set. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
AUX IN RL
OPTICAL IN
DC IN
Overview
29” HD Soundbar with Bluetooth Wireless
Users Guide for Model ITB037SO v2133-01
FCC WARNINGS
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
ADDITIONAL WARNINGS
WARNING: Shock hazard - Do Not Open.
Caution and marking information is located at the rear or bottom of the apparatus.
Mains plug is used as disconnect device and it should remain readily operable during intended use. In
order to disconnect the apparatus from the mains completely, the mains plug should be disconnected
form the mains socket outlet completely.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
Objects lled with liquids, such as vases, shall not be placed on the apparatus
WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or
sensitive nish. As with any rubber compound made with oils, the feet could cause marks or staining
where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass
between the unit and the surface to reduce the risk of damage and/or staining.
Only use the included power supply or a UL/ETL certied power supply of the same power output
specications.
LINE IN
SOURCE
PAIR
VOL +
VOL
AUX IN RL
OPTICAL IN
DC IN
AUX
LINE IN OPTICAL
Power/Source
Press to power ON.
Press and hold to power OFF.
Press to change audio source.
Volume +/-
Press to adjust the volume up or down.
Pair
Press to begin pairing to a Bluetooth device.
Power Indicator
Red Light (Standby, o when
unit is powered ON)
Bluetooth Indicator
Blue Light
Aux In Audio
Indicator
Green Light
Optical Audio
Indicator
Orange Light
Aux In
Requires RCA stereo audio cable (included).
Line In
Requires 3.5mm audio cable
(not included).
DC Power Port
Optical Audio Input
Remote IR Sensor
Wall Mounts
Remote requires 1
CR2025 button cell
battery (included).
Right Side Controls & Input
Remote Control & Battery
Rear
Front
Power
Press to power ON/OFF.
Mute
Press to mute audio.
Bluetooth
Press to switch to Bluetooth
audio source. Remote does not
initiate pairing, use Pair button
on speaker.
Aux/Line In
Press to select
Aux In/ Line In source.
Optical
Press to select
Optical audio source.
Skip Back/Fwd
Press to skip the selected track
(BLUETOOTH MODE).
Play/Pause
Press to play or pause the
selected track
(BLUETOOTH MODE).
Volume /+
WARNING : This product can expose you to chemicals including lead, which is known to the State
of California to cause cancer and birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov. This product meets and complies with all Federal regulations.
Features
Voice prompts announce speaker functions
Bluetooth Wireless: 60 ft. range
Built-in stereo speakers
Line In (3.5mm audio input)
Optical digital audio input
RCA stereo audio inputs
Wall mountable
DC power input
Includes
RCA stereo audio cable
Wall Mounting hardware & instructions
AC/DC Power adapter
Remote control & battery
AUX IN RL
OPTICAL IN
DC IN
LINE IN
SOURCE
PAIR
VOL +
VOL
Power
Plug the AC/DC power adapter (included) into the DC Input on the back of the unit
and a standard wall outlet.
Bluetooth Wireless Audio
Pairing to a Device & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. If your device should become
unpaired or you nd it is unable to connect, repeat the steps listed here.
1. Power ON the soundbar and press or Source on the soundbar on the
remote Bluetooth Mode. to select Press the to begin pairing.Pair button
The Pairing Indicator will begin quickly ashing blue. When pairing, remain
within 3 feet of the unit.
2. Using the controls on your Bluetooth device, search for and select ITB037
in your Bluetooth settings to pair. If your device requests a password, enter
the default password 0 0 0 0.If need be, refer to the user’s manual for your
specic device for instructions on connecting Bluetooth devices.
3. When successfully paired, the will turn solid, an audible Pairing Indicator
chime will sound and a voice will announce the connection. Use the
controls on the connected device to select and begin playing audio.
Previously Connected Devices
The soundbar can remember multiple Bluetooth devices and will always try
to re-connect to the last device used.
To re-connect to a dierent device, turn o Bluetooth on unwanted devices,
then access the Bluetooth settings menu on the device you wish to use and
select ITB037.
DC IN
LINE IN
PAIR
VOL
Aux In (Stereo RCA Inputs)
Requires RCA stereo audio cable (included). When
connecting an RCA stereo audio cable (Red/White),
match the colored ports to their corresponding plugs.
1. Connect the RCA stereo audio cable to the Aux
Inputs on the soundbar and the audio outputs
on a television or other audio source.
2. Power ON the soundbar and press Source on
the soundbar Aux/Line In on the remote or to
select A voice will announce the Aux In Mode.
source mode and the indicator will turn green.
3. Audio played through the television or other
source should now be heard through the
speakers.
Optical Input
Requires: An audio source with an Optical Audio Output and a Digital Optical Audio
Cable (not included).
1. Using a Digital Optical Audio Cable, connect
the optical output on your audio source (TV,
amplier, etc.) to the on the Optical Input
soundbar
2. Power ON the soundbar and press Optical
on the remote Source on the soundbar or
to select A voice will Optical/SPDIF Mode.
announce the source mode and the indicator
will turn orange.
3. On the connected audio source (TV, amplier,
etc.), make sure the audio settings are set to
PCM or Optical Audio and are turned on.
4. Audio played through the connected audio
source (TV, amplier, etc.) should now be heard
through the speakers.
Important tips for optical audio:
Use the correct toslink cable and make sure that it is rmly seated in both
source and sound bar sockets.
Optical output is activated on the source (they should see a red light
emitting from the toslink socket).
It may be labeled SPDIF in the setting menu of the source.
The optical output is set to output PCM and not Dolby Digital.
AUX IN RL
OPTICAL IN
DC IN
AUX IN RL
OPTICAL IN
DC IN
Line In
Requires a 3.5 mm audio cable (not included).
1. Using a 3.5 mm audio cable, connect the on the soundbar to the Line In
audio output/headphone jack on a smartphone or other audio source.
2. Power ON the soundbar and press or Source on the soundbar Aux/Line
In on the remote Aux In Mode. to select A voice will announce the source
mode and the indicator will turn green. Connecting via Line In overrides the
Aux In source. Remove the 3.5mm audio cable to hear the Aux In source again.
3. Audio played through the connected device should now be heard through
the speakers. Use the controls on the connected device to play, pause, or
skip selected tracks.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the
support section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: | Email Support: | Email Parts: 1-888-999-4215 prodinfo@dpiinc.com partsinfo@dpiinc.com
Copyright © 2017 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green


Product specificaties

Merk: ILive
Categorie: Home cinema set
Model: ITB037

Heb je hulp nodig?

Als je hulp nodig hebt met ILive ITB037 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Home cinema set ILive

Handleiding Home cinema set

Nieuwste handleidingen voor Home cinema set