ILive ISBW101 Handleiding

ILive Speaker ISBW101

Lees hieronder de 📖 handleiding in het Nederlandse voor ILive ISBW101 (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Battery Charging
To charge the internal battery, plug the USB charging cable
into the DC Power Input on the speaker and a powered on
computer or USB power adapter (not included) and standard
power outlet. Charging time is approximately 4 hours. Battery
life is approximately 18 hours at 50% volume.
While the unit is charging it will display a solid red light. When
the battery is fully charged the light will turn o.
Air Cushion Speaker
Users Guide for Model ISBW101 v2682-01
Overview
Aux In & Micro SD
Features
Waterproof
Shock absorbing cover
Bluetooth wireless 5.0: range 60 ft. (18m)
Party Plus Mode
Built-in rechargeable battery: approximately 18hrs
playtime at 50% volume
USB-C port for battery recharge
Includes
USB-C to USB charging cable
User manual
Wrist Strap
Aux In
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the on the unit Aux In
and the on an audio device. The unit will audio output
automatically change to Aux in mode.
2. Use the controls on the connected device to select and
play audio. Be sure the volume on your connected device
is audible when you begin playing.
1. Micro SD Port
2. Aux In
3. DC Power Input
4. Light will turn solid Charging/Bluetooth Indicator LED:
red when charging and will turn o when fully charged.
Flashing blue when in Bluetooth mode. Solid Blue light
when paired to a device.
5. Power/Source: Press and hold to power ON/OFF. Press
to change sources between Bluetooth, Aux in and SD
modes.
6. Press to play/pause audio. When powered Play/Pause:
ON, quickly press twice to pair to enter into pairing
mode. Press and hold to activate mode.Party Plus
7. Volume/Skip+/Prev- : Press to adjust volume level. Press
and hold to change to previous/next track.
8. When rst powered ON repeatedly press to LED Lights:
change ashing speed (once for slow, twice for medium,
three times for fast). Continually press to change the
lights to a specic color (white, blue, red,green, yellow,
purple, light blue and OFF).
1 2
6 8
4
7
5
3
Micro SD
1. Load a Micro SD memory card into the Micro SD port.
2. The speaker will automatically switch to SD mode.
3. Use the controls on the speaker to select and play audio
from the connected drive.
Customer Support
Customer Service: | Email Support: 1-888-999-4215 prodinfo@
dpiinc.com partsinfo@dpiinc.com | Email Parts:
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2020 Digital Products
International (DPI, Inc.) All other trademarks
appearing herein are the property of their
respective owners. Specications are subject
to change without notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
WARNING: To prevent re or shock hazards, do not expose this
unit to rain or moisture.
WARNING : Where the mains plug or appliance coupler is used
as the disconnect device, such disconnect device shall remain
readily operable.
Lithium batteries, like all rechargeable batteries, are recyclable
and should be recycled or disposed of according to state and local
guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might
explode. Contact your local government for disposal or recycling
practices in your area.
Party Plus Mode
If you have another ISBW101 speakers, you can pair and play
the two speakers together for a surround sound eect, or have
two speakers playing in dierent rooms.
1. To enter Party Plus Mode, Power ON both speakers and
make sure both units are in Bluetooth mode.
2. Press and hold the Play/Pause button on one of the
units (this is now the primary unit), and the speakers will
attempt to pair to each other.
3. When the two speakers are paired together a beep will
announce the connection.
4. Connect Bluetooth device to speakers using the steps
from the “Pairing and Playing Bluetooth Audio”
section below.
5. Use your device to select and play tracks. The audio will
now be heard through both speakers.
6. To disconnect the speakers, press and hold the Play/
Pause button on any one of the two units.
Note: To use Party Plus Mode, please make sure that you
connect the speakers before pairing to your Bluetooth
device. You will not be able to connect the speakers if you
are already paired to a Bluetooth device.
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.
Made
Green
Pairing & Playing Bluetooth Audio
1. When rst powered on, the speaker defaults to Bluetooth
Mode and is ready to pair automatically. When pairing,
remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select
ISBW101 in the Bluetooth settings to pair. If need be,
refer to the user’s manual for your specic device for more
information.
3. When successfully paired, a voice prompt will announce
the connection. Your Bluetooth device will now be heard
through the speaker.
4. Use the controls on the connected Bluetooth device to
select and play audio. Use the speaker controls or the
connected Bluetooth device to play, pause, and adjust
the volume level.
5. After initial pairing, the speaker will automatically
connect to the last Bluetooth device used whenever it is
in Bluetooth Mode. If your device should become Note:
unpaired or you nd it is unable to connect, Quickly
press the Play/Pause button twice to enter into Pairing
Mode. A voice prompt will announce the connection and
you can connect to the speaker manually.


Product specificaties

Merk: ILive
Categorie: Speaker
Model: ISBW101

Heb je hulp nodig?

Als je hulp nodig hebt met ILive ISBW101 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker ILive

Handleiding Speaker

Nieuwste handleidingen voor Speaker