ILive ISB143 Handleiding

ILive Speaker ISB143

Lees hieronder de 📖 handleiding in het Nederlandse voor ILive ISB143 (3 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
International Support
To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently asked
questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en Inglés,
Español y Francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en Anglais,
Espagnol ou Français, ou pour obtenir des réponses
à des questions fréquemment posées, consultez la
rubrique d’assistance sur:
www.iLiveElectronics.com
Contact Information
Website: www.iLiveElectronics.com
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
Phone Support: 1-888-999-4215
Warranty
For Warranty Information and the most
up-to-date version of this Users Guide, go to:
www.iLiveElectronics.com.
Protect for Today
Sustain for Tomorrow
Made
Green
Specications are subject to change without notice.
Copyright © 2023 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property
of their respective owners.
Micro SD
1. Load a Micro SD memory card into the
appropriate media port.
2. The speaker will automatically switch to SD
mode.
3. Use the controls on the speaker to select and
play audio from the connected drive.
FCC WARNINGS
WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
ADDITIONAL WARNINGS
• WARNING: To prevent re or shock hazards, do not expose
this unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is
used as the disconnect device, such disconnect device shall
remain readily operable.
• Lithium batteries, like all rechargeable batteries, are
recyclable and should be recycled or disposed of according to
state and local guidelines. They should never be disposed of in
normal household waste and they should never be incinerated,
as they might explode. Contact your local government for
disposal or recycling practices in your area.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California
to cause cancer and birth defects or other reproductive
harm. For more information go to: www.P65Warnings.
ca.gov. This product meets and complies with
required Federal product guidelines.
TAUX
DC IN Brightside Wireless
Speaker
User’s Guide for Model ISB143 v3142-01
Controls
1. Power/Play/Pair: Press
and hold for 3 seconds to
power on your speaker.
Press and hold again to
power o your speaker.
When on, press once
to play or pause music
tracks. Press twice to
connect or disconnect
from Bluetooth.
2. Mode: Press to change
source modes to
Bluetooth, AUX, or
MicroSD. Press and hold
to activate TWS Mode.
3. Lights: Press to cycle
through LED light modes.
Press twice to turn lights
on/o. Press and hold
to turn voice prompts
on/o.
4. Vol +/Next: Press to
increase volume level.
Press and hold to play the
next track.
5. Vol -/Previous: Press to
decrease volume level.
Press and hold to play the
previous track.
Features
Bluetooth wireless 5.3: range approximately 33ft.
Bluetooth TWS – Pair with another ISB143 speaker
Micro SD card port
Aux In
Digital volume control
Voice prompts
Built-in rechargeable battery: approximately 4 hrs of
playtime at 50% volume
USB-C port for battery recharge
Charging the Battery
To charge the internal battery, plug the USB charging
cable into the DC Power Input on the speaker and a
powered-on computer or USB power adapter (not
included) and standard power outlet. Charging time is
approximately 180 minutes.
When the battery is low, a voice will announce Low
battery, then the unit will automatically power OFF.
While the unit is charging, the Indicator LED will
display a solid red light. When the battery is fully
charged, the light will turn o.
Pairing & Playing Bluetooth Audio
1. When rst powered on, the speaker defaults to
Bluetooth Mode and is ready to pair automatically.
When pairing, remain within 3 feet of the
Bluetooth device.
2. Using the controls on your Bluetooth device,
select in the Bluetooth Settings to pair. ISB143
If need be, refer to the users manual for your
specic device for more information.
3. When successfully paired, a voice will announce
“Bluetooth connected. Your Bluetooth device will
now be heard through the speaker.
4. Use the controls on the connected Bluetooth
device to select and play audio. Use the speaker
controls or the connected Bluetooth device to
play, pause, and adjust the volume level.
5. After initial pairing, the speaker will automatically
connect to the last Bluetooth device used
whenever it is in Bluetooth Mode.
Note: To disconnect a device, press the Power button
twice. The speaker will re-enter pairing mode and
can be paired with a dierent device using the steps
above.
2
3
TF AUX
DC IN
Inputs
Includes
User’s Guide
USB-C to USB charging cable
Bluetooth TWS
1. When powered on, press and hold the Mode
button on one of your speakers. This speaker
will act as the host and will begin searching
for another powered-on ISB143 speaker. The
speakers will connect automatically.
2. You can now connect the paired speakers to a
Bluetooth device using the standard set up steps.
3. The two speakers will automatically reconnect the
next time they are both on
4. Press and hold the button on either speaker Mode
to disconnect the speakers and exit TWS mode.
Micro SD
Slot
Voice Prompts
Press and hold the button for 5 seconds to turn Lights
voice prompts on/o.
1
TF AUX
DC N
Indicator
LED
Aux
Input
USB-C
Power
Input
4
5


Product specificaties

Merk: ILive
Categorie: Speaker
Model: ISB143

Heb je hulp nodig?

Als je hulp nodig hebt met ILive ISB143 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker ILive

Handleiding Speaker

Nieuwste handleidingen voor Speaker