IHome iP16 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IHome iP16 (8 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Model iP16
Portable Alarm Clock Speaker
System for your iPhone / iPod ®
Questions? Visit www.ihomeaudio.com
1
2
3
3
4
4
4
5
6
7
7
8
9
10
11
Quick Start
Controls and Indicators
iP16 Display
Install Clock Backup Battery
Using iP16
Charging your iPhone / iPod
Listening to your iPhone / iPod
Setting the Time
Alarm Operation
Sleep Operation
Snooze/Dimmer Operation
A Consumer Guide to Product Safety
Trouble Shooting
Solución De Problemas
Warranty Information
Table of Contents
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material
should be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine,
thinner or similar materials can damage the surface of the unit.
NOTE: Be careful not to touch the surface of the speakers at either end of the unit
Maintenance
Getting Started
Thank you for purchasing the iHome iP16 Audio Speaker System for your iPhone/iPod. Designed
specifically to work with your iPhone/iPod, this system provides high quality audio performance that
brings out the best in your music.
Please read this instruction book carefully before operating the iP16 and keep it for future reference.
Check for iPhone/iPod compatibility
iP16 is an advanced system and supports most updated iPod features. To make sure your iPhone/iPod works properly
with iP16, please update your iPhone/iPod firmware with the latest version via iTunes.
1
3:iPhone/iPod1:power
Attach the AC adaptor cable to
the DC jack on the back of the
iP16 and plug the other end into a
working wall socket. For portable
operation, remove battery
compartment door on the bottom
of the unit and insert 4 AA batteries
(see diagram on page 4).
RESET
RESET
TEST
TEST
Gently dock iPhone/iPod into dock
(iPhone/iPod must not be in a skin
or case). iPhone/iPod will charge
while docked.
Press the Power Button on the iP16
to play the iPhone/iPod.
2:inserts
4:time
Quick Start
See the table below to find which side
of the dock insert matches your
iPhone/iPod model and place insert
in dock. NOTE: iPhone 3G, iPhone
3GS, iPod Classic 160 GB and nano
6G do not require the insert.
1) Turn insert so correct side of the
insert for your iPhone/iPod is facing
the display.
2) Slide insert downwards until it
snaps into place
all iPod nano models
up to nano 5G
no insert needed for
iPod Classic 160 GB
iPhone 3G/3GS
iPod nano 6G
Classic/Touch side Nano side
iPod classic (80, 120 GB)
iPhone 4, touchiPod
For this
iPhone/iPod
Use this insert
FCC Information
Battery Warning
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
For models that use Lithium batteries
Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high
temperatures & not handled appropriately
• Do not place loose batteries in a pocket, purse, or other container containing metal objects, do not mix with used or other
battery types, or store with hazardous or combustible materials.
• Store in cool, dry, ventilated area.
• Follow applicable laws and regulations for transport and disposal.
For models that require more than one battery
• Do not mix with used or other battery types/brands
• Replace all batteries at the same time
• Do not open batteries
• Do not dispose of in fire
• Do not heat above 75ºC (167ºF)
• Do not expose contents to water
• Do not charge or recharge
• Do not install backwards
To use Time Sync, dock your iPhone or iPod touch and press the Clock
Adj. Button. SYN will appear on the display and the unit will sync to the
time on your iPhone or iPod.
To set time manually,
Press the DST On/Off Button on the back of the unit as needed to add
or subtract an hour for daylight saving time or standard time.
Press & Hold the Clock Adj. button on the back of the unit until
the hour display flashes.
Press the + - buttons or to set the hour, then press the Clock Adj. button
Press the + - buttons or to set the minutes then press the Clock Adj.
button again to confirm time setting.
Up/Plus Button
Down/Minus Button
DST On/Off button
Clock Adj. ButtonSleep Button
Power Button
Snooze/Dimmer Button
Alarm Button
DC Jack
2
Controls and Indicators
Front Panel
Back Panel
Press to power unit
ON or OFF
Decrease volume,
time setting
Silence alarm temporarily
or adjust display brightness
Press to add or
subtract 1 hour for
daylight saving time
Increase volume,
time setting
Press and hold for
Clock Adjust mode
Press for Sleep mode
Connect AC adapter
Press and hold for
Alarm Setting mode
3
iP16 Display
Install Clock Backup Battery
Alarm Indicator
Battery Low Indicator
Daylight Saving Time
Indicator
iPhone/iPod Indicator
Sleep Indicator
PM Indicator Time Display
The iP16 uses a CR2032 button cell battery (included with instructions) to keep
alarm and clock settings in the event of a power failure and 4 “AA” batteries to
maintain alarm operation.
If the Backup Battery has been installed and a power failure occurs or the AC
adaptor is accidentally disconnected, the display backlight will not remain lit, but
current time and alarm time settings will be temporarily maintained. Otherwise,
you must reset the time and alarm settings. If 4 “AA” batteries are installed, alarm will
operate when unit is not connected to AC adaptor.
1. Please make sure the AC adaptor is connected. Otherwise all settings may
be lost during battery replacement.
2. Open and remove the battery compartment door located on the bottom of the unit.
3. Pinch the backup battery release tab and pull the backup battery holder free.
4. Insert one CR2032 button cell battery with the + side facing upwards.
5. Replace the backup battery holder into the unit, then replace the battery
compartment door.
Note: Make sure you dispose of batteries properly (see your local regulations).
Note: Buttons will not function if only back up battery installed.
Using iP16
Installing Backup Battery
Pinch to release


Product specificaties

Merk: IHome
Categorie: Wekkerradio
Model: iP16
Kleur van het product: Grijs
Bluetooth: Nee
Inclusief AC-adapter: Ja
Gemiddeld vermogen: - W
Ondersteund aantal accu's/batterijen: 4
Wekker: Ja
Ingebouwde accu: Nee
Audio-uitgangskanalen: - kanalen
Frequentiebereik: - Hz
Geluid verbeterende technologie: Reson8
Klok/Datum display: Ja
Apple docking-compatibiliteit: iPhone, iPod
Ingebouwde lader: Ja
AC-ingangsspanning: 100 - 240 V
Type batterij: AA

Heb je hulp nodig?

Als je hulp nodig hebt met IHome iP16 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wekkerradio IHome

IHome

IHome iP41 Handleiding

17 Januari 2024
IHome

IHome iP16 Handleiding

17 Januari 2024
IHome

IHome IP48 Handleiding

16 Januari 2024
IHome

IHome iH11 Handleiding

16 Januari 2024
IHome

IHome iPL10 Handleiding

16 Januari 2024
IHome

IHome iBT230 Handleiding

16 Januari 2024
IHome

IHome iDL45 Handleiding

16 Januari 2024
IHome

IHome iBT28 Handleiding

16 Januari 2024
IHome

IHome iH22 Handleiding

16 Januari 2024
IHome

IHome iK50 Handleiding

16 Januari 2024

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio

Vimar

Vimar 14449.SL Handleiding

30 November 2024
Vimar

Vimar 16573 Handleiding

30 November 2024
Vimar

Vimar 20449 Handleiding

30 November 2024
Vimar

Vimar 20449.B Handleiding

30 November 2024
Vimar

Vimar 14449 Handleiding

30 November 2024
Vimar

Vimar 20449.N Handleiding

30 November 2024
Akai

Akai AR 175D Handleiding

12 November 2024
Tristar

Tristar CL 1489 Handleiding

30 September 2024
Akai

Akai AR150 Handleiding

12 November 2024