Ignis G2I HD526 A Handleiding

Ignis Vaatwasser G2I HD526 A

Lees hieronder de 📖 handleiding in het Nederlandse voor Ignis G2I HD526 A (2 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
ENQuick Guide
1
THANK YOU FOR BUYING AN IGNIS PRODUCT.
CONTROL PANEL
FIRST TIME USE
Before using the appliance carefully read Safety Instructions
guide.
PROGRAMS TABLE
PLEASE SCAN THE QR CODE ON YOUR
APPLIANCE IN ORDER TO HAVE MORE
DETAILED INFORMATION
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
It is mandatory that the salt reservoir never be empty.
It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Position the funnel and ll the salt reservoir (see gure)
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
3. Only the rst time you do this: ll the salt reservoir
with water.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water
softener beyond repair).
Whenever you need to add salt, it is mandatory to complete the proce-
dure before the beginning of the washing cycle to avoid corrosion.
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid
dispenser A should be lled when the RINSE AID
REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the appliance
tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the
detergent into the dry dispenser only. Place the amount of detergent for D
pre-washing directly inside the tub.
If all-in-one detergents are used, we recommend using the TABLET button,
because it adjusts the program so that the best washing and drying results
are always achieved.
Usage of detergent not designed for dishwashers may cause
malfunction or damage to the appliance.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently pre-
venting scale buildup on heater, contributing also to better cleaning e-
ciency. This system regenerates itself with salt, therefore it is required
to rell salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per 6 Eco cycles with water hardness level set to 3.
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
Single regeneration consumes: ~3.5L of water;
Takes up to 5 additional minutes for the cycle;
Consumes below 0.005kWh of energy.
A
C
D
1. ON-OFF/Reset button with indicator light
2. Program selection button
3. Salt rell indicator light
4. Rinse Aid rell indicator light
5. Program number and delay time indicator
6. Tablet indicator light
7. Display
8. Half Load indicator lights
9. Half Load button
10. Delay button
11. START/Pause button with
indicator light / Tablet (Tab)
Program Programs description
Drying
phase
Available
options *)
Duration
of wash
program
(h:min)**)
Water
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
1.
Eco 50°- Eco program is suitable to clean normally soiled tableware.
that for this use. it is the most ecient program in terms of its
combined energy and water consumption. and that it is used to
assess compliance with the EU Ecodesign legislation.
3:35 9.5 0.95
2. Intensive 65° - Program recommended for heavily soiled crockery.
especially suitable for pans and saucepans (not to be used for
delicate items). 2:40 18.0 1.60
3.
Mixed 55° - Mixed soil. For normally soiled dishes with dried food residues.
2:15 16.0 1.40
4.
Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle, that
ensures optimal cleaning and drying performance in shorter time.
1:30 11.5 1.30
5. Fast&Clean 28’
50° -
Program to be used for half load of lightly-
soiled dishes with no dried food residues. Does not have
drying phase. - 0:28 9.0 0.50
6.
Night 50° - Suitable for night-time operation of the appliance.
Ensures optimal cleaning and drying performance with the lowest
noise emission.
3:35 16.6 1.30
7. Extra Hygiene 65° - Normally or heavily soiled crockery, with
additional antibacterial wash. Can be used to perform maintenance
of the dishwasher. 2:00 12.0 1.50
8. Prewash - Use to refresh crockery planned to be washed later. No
detergent to be used with this program. - 0:12 4.7 0.01
9.
Self-Clean
65°
- Program to be used to perform maintenance of the
dishwasher, to be carried out only when the dishwasher is EMPTY using
specic detergents designed for dishwasher maintenance. - 0:50 10.0 0.80
1 2 3 4 5 6 7 8 9 10 11
2
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The dishwasher does
not ll the water.
Display shows: H,
6 and On/O LED is
blinking rapidly
No water in the water supply or the tap is closed.
Make sure there is water in the water supply or the tap running.
The inlet hose is bent. Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwa-
sher and reboot.
The sieve in the water inlet hose is clogged;
it is necessary to clean it
After having carried out the verication and cleaning, turn o and turn on the
dishwasher and restart a new program.
Dishwasher nishes the
cycle prematurely. Display
shows: and On/O 15
LED is blinking rapidly
Drain hose positioned too low or siphoning
into home sewage system.
Check if end of drain hose is placed at correct height (see INSTALLATION).Check
for siphoning into home sewage system, install air admittance valve if necessary.
Air in water supply. Check water supply for leaks or other issues letting air inside.
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specic Regulation requirements.
TROUBLESHOOTING
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
Using QR code on your product.
Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-
sales Service, please state the codes provided on your product‘s identication plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model
identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
IEC 436
:
Please scan the on your product in order to have more detailed information. QR code
DELAY -The start of the program may be delayed for a period of time
between and hours.1 12
The DELAY function cannot be set once a wash cycle has been started.
TABLET (Tab) If you use powder or liquid detergent, this option -
should be o.
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.
HALF LOAD - If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and detergent.
Remember to halve the amount of detergent.
Please scan the on your product in order to have more detailed information. QR code
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Note for Test Laboratories: For information on
comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration up to 20 min.
CUTLERY BASKET
The basket is equipped with top
grilles for improved cutlery
arrangement.
The cutlery basket should be positioned only
at the front of the lower rack.
Knives and other utensils with sharp edges must be
placed in the cutlery basket with the points facing
downwards or they must be positioned horizontally in
the tip-up compartments on the upper rack.
LOADING THE RACKS CAPACITY: 14 standard place-settings
More information in the Daily Reference Guide on website.
CLEANING AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS
A
A
B
C
In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
The lower spray arm may
be removed by pulling it
upwards.
UPPER RACK
(loading example for
the upper rack)
Load delicate and light dishes:
glasses, cups, saucers, low
salad bowls.
LOWER RACK
(loading example for the lower rack)
For pots, lids, plates, salad bowls, cutlery
etc.. Large plates and lids should ideally
be placed at the sides to avoid interferen-
ces with the spray arm.
FOLDABLE
FLAPS WITH
ADJUSTABLE
POSITION
400011660357
01/2023 ks - Xerox Fabriano


Product specificaties

Merk: Ignis
Categorie: Vaatwasser
Model: G2I HD526 A

Heb je hulp nodig?

Als je hulp nodig hebt met Ignis G2I HD526 A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Vaatwasser Ignis

Handleiding Vaatwasser

Nieuwste handleidingen voor Vaatwasser

Smeg

Smeg ST3339L Handleiding

21 November 2024
Smeg

Smeg STA7233L Handleiding

21 November 2024
Smeg

Smeg STA4513 Handleiding

21 November 2024
Smeg

Smeg STL66337L Handleiding

21 November 2024
Smeg

Smeg STL825A-2 Handleiding

21 November 2024
Bosch

Bosch SMU50E65AU Handleiding

20 November 2024
Profilo

Profilo BMA401E5 Handleiding

19 November 2024
Upo

Upo UV642E60 Handleiding

19 November 2024
IFB

IFB Neptune FX1 Handleiding

19 November 2024