Igenix IG5250 Handleiding

Igenix Heater IG5250

Lees hieronder de 📖 handleiding in het Nederlandse voor Igenix IG5250 (6 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

2kW CONVECTOR HEATER WITH

THERMOSTAT

Model Number: IG / IG5250 5200

INSTRUCTIONS FOR USE

Thank you for purchasing this product

Please read these instructions

SAFETY INSTRUCTIONS

Read and follow all of the instructions even if you feel you are familiar with the product, and find a place to

keep this manual handy for future reference.

For your convenience record the complete model number, , and batch number beginning beginning with „IG‟

with „5‟ along with the date that you purchased the product and the original receipt and attach to this manual.

Retain in the event that the warranty service may be required.

Important: This appliance is not intended for use by persons including children with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliances by a person responsible for their safety.

 This product is intended for domestic use only.

 This product is for indoor use only. Do not use the heater outdoors.

 Ensure that the electricity supply in your home is rated at 220 -240 volts before operating the appliance.

 If the mains lead of this appliance becomes damaged then it must be replaced by the manufacturer‟s

service agent or a suitably qualiﬁed person using the same rated cable in order to avoid a hazard .

 There are no user serviceable parts inside this heater.

 Children should be supervised to ensure that they do not play with the appliance.

 Always turn oﬀ and unplug the appliance before attempting to move.

 Always turn oﬀ and unplug the appliance when not in use.

 Do not use the heater unless the feet are attached correctly.

 Do not use the heater in the immediate surroundings of a bath, show or swimming pool. er

 Do not reach for an appliance that has fallen into water. Switch of at supply and unplug immediately.

 Never place the heater where it may fall into water, or stand on a damp ﬂoor.

 Do not cover or obstruct any of the heat outlet grilles or air intake openings of the heater.

 Do not insert any objects through the heat outlet of air intakes grilles.

 Do not place the heater on carpets with a deep pile.

 Always ensure that the heater is placed on a ﬁrm ﬂat surface.

 Always operate upright.

 This appliance heats up when in use. To avoid burns, do touch the hot surface. Switch oﬀ and let the

appliance cool before moving or touching.

 Ensure that the heater is not positioned close to curtains or furniture as this may create a ﬁre hazard.

 Do not place the heater in front of, immediately below a wall socket. or

 Do not use the heater in areas where ﬂammable liquids are stored or ﬂammable fumes may be present.

 To protect against ﬁre, electric shock or injury do not immerse the heater, power cord or plug in water or

any other liquid.

 Do not twist, kink or wrap the cord around the appliance, this may cause the insulation to weaken and split

 Do not run the cord under carpeting, rugs or runners. Arrange cord away from traﬃc so that it will not be

tripped over. The use of an extension cord with this appliance is not recommended.

 Do not operate with the cord coiled as a build up of heat could be suﬃcient to become a hazard.

 Do not place the appliance close to a radiant heat source.

 Do not store the appliance while it is still hot.

 Do not remove plug from power socket by pulling the supply cord. Always grip the plug.

 Do not remove the plug socket until the appliance is switched oﬀ.

 Do not use the appliance to dry clothes.

 Do not operate appliance with wet hands.

 The most common cause of overheating is deposits of dust or ﬂuﬀ in the appliance. Ensure these deposits

are removed regularly by unplugging the appliance and vacuum cleaning the grilles.

 e this appliance only as described in the manual. Any other use is not recomended by the manufacturer Us

and may cause ﬁre, electric shock or injury.

WARNING : In order to avoid overheating, cover the heater. do not

Speciﬁcation

Supply Voltage:

220-240V, 50 Hz

Max Output:

2000W

Assembly Instructions

Wall Mounting Instructions

Before mounting please ensure the wall is suitable for this type of appliance.

1. Find the correct position on the wall following the safety instructions. There must be a minimum

clearance of 10cm between the ﬂoor and the base of the heater once in position.

2. b, Using an electric drill, drill four 8mm holes (a, c and d) into the wall, the distance between “a” and

“b” is 38.5cm, the distance between “c” and “d” is 46.2cm. The depth of the hole should be about

4cm. The distance between “a” and “c” (also “b” and “d”) is 20.9cm. As picture A shows. Then kock

the self-tapping screw into the wall by hammer.

3. Fix the screws and bracket onto the wall, please pay attention to the position of the bracket and if

any hazards are within range.

4. et to the back of the heater and let the clip hold the heater. Screw the Line up the holes of the brack

heater to the bracket through the alingned holes.

Control Panel

1. Ensure that the heater is unplugged and that the power

switches are turned to the off position.

2. Turn the heater upside down.

3. Locate the two holes at each end of the base of the heater.

4. Secure the footplates to the base through the holes using the

screws provided.

5. Turn the heater upright.

Product specificaties

Merk:	Igenix
Categorie:	Heater
Model:	IG5250
Kleur van het product:	Black, White
Aantal vermogenniveau's:	3
Timer:	Ja
Soort:	Radiator
Instelbare thermostaat:	Ja
Oververhittingsbeveiliging:	Ja
Handvat(en):	Ja
Ophangsysteem voor aan de muur:	Ja
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 Hz
Bevriezings beveiliging:	Ja
Verwarmingsvermogen:	2000 W
Plaatsingsopties:	Vloer
Verwarming power (min):	750 W