IFM VTV12A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM VTV12A (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Operating instructions
Vibration transmitter
VTV12A
80000575/00 04/2013
UK
2
Symbols used
â–ºInstructions
Important note
Non-compliance can result in malfunction or interference.
1 Safety instructions
• Please read the product description prior to set-up of the unit. Ensure that the
product is suitable for your application without any restrictions.
• The unit complies with the relevant regulations and EU directives.
• Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application.
• That is why installation, electrical connection, set-up, operation and
maintenance of the unit must only be carried out by qualified personnel
authorised by the machine operator.
• Pleaseadheretothenotesonsafeuseinhazardousareas:→operating
instructions (Ex protection related part) for vibration sensors according to the
EU directive 94/9/EC annex VIII (ATEX) group II, equipment category 3G / 3D.
• If no operating instructions (Ex protection related part) or EC declaration of
conformity is supplied with this product in the language of the EU user country,
these can be requested from your dealer (see delivery note) or manufacturer
(see cover sheet / back).
2 Functions and features
The vibration transmitter detects the vibration in the system (measured / evaluated
physical unit = vibration velocity). This is converted into an analogue signal at the
current output.
3
UK
3 Installation
â–ºMount only in a thick housing wall
(e.g. transport thread).
â–ºEnsure that the signal direction is
correct.
â–ºEnsure a safe vibration
transmission and allow no elastic
intermediate layers.
►Select either the ¼"-28 UNF / M8
(2) or the ¼"-28 UNF (3) threaded
adapter and insert into the unit (1).
Threaded adapters are supplied.
â–ºTighten using a 3 mm Allen key.
Tightening torque 8 Nm.
â–ºDrill and tap a hole at the mounting
location:
- M8 hole / depth min. 10 mm for
threaded adapter ¼"-28 UNF/ M8.
- Or ¼"-UNF hole / depth min.
13 mm for threaded adapter
¼"-28 UNF.
â–ºTighten the unit with a tightening torque of 8 Nm.
4 Electrical connection
The unit must be connected by a qualified electrician. The national and
international regulations for the installation of electrical equipment must be
adhered to.
M12
4
12
3
L+
L
1
2
Pin 1: L+ (9.6...32 V DC)
Pin 2: 4...20 mA


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: VTV12A

Heb je hulp nodig?

Als je hulp nodig hebt met IFM VTV12A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM AL2507 Handleiding

10 Februari 2025
IFM

IFM AL2607 Handleiding

10 Februari 2025
IFM

IFM MK5361 Handleiding

10 Februari 2025
IFM

IFM AE3400 Handleiding

28 Januari 2025
IFM

IFM DTE932 Handleiding

28 Januari 2025
IFM

IFM DTE931 Handleiding

28 Januari 2025
IFM

IFM DTE934 Handleiding

28 Januari 2025
IFM

IFM EVF729 Handleiding

28 Januari 2025
IFM

IFM EVT728 Handleiding

28 Januari 2025
IFM

IFM ID5058 Handleiding

28 Januari 2025

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd