IFM E70585 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM E70585 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Installation instructions
FC insulation displacement connector
E70585
E70586
E70587
80271731/00 12/2017
UK
2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose ( Functions and features).→
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• The plant manufacturer is responsible for the safety of the plant in which the
device is installed.
• If the device is used in a way that is not intended by the manufacturer, the
protection supported by the device may be impaired.
• Protect units and cables against damage.
3 Functions and features
E70585 / E70586
The FC insulation displacement connector carries the AS-i voltage from the flat
cable to the M12 socket.
• Current rating 4 A.
The connectors E70585 and 70586 differ in the orientation of the M12 socket
(keyway).
3
UK
E70587
The FC insulation displacement connector carries the AS-i voltage and the
external 24 V supply from the flat cable to the M12 socket.
• Current rating 4 A.
4 Wiring
1
3
E70586
1: AS-i +
3: AS-i -
1
3
E70585
1: AS-i +
3: AS-i -
5
1
3 4
2
E70587
1: AS-i +
2: AUX -
3: AS-i -
4: AUX +
5 Installation
â–ºDisconnect power.
â–ºLoosen screw 1 (included) and open the
device.
1: screw (tightening torque 1.65 Nm)
â–ºChoose a flat mounting surface and fix the
device on it (mounting holes 2). The mounting
screws are not supplied.
2: mounting holes


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E70585

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E70585 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM TAD981 Handleiding

26 November 2024
IFM

IFM TAD961 Handleiding

26 November 2024
IFM

IFM TAD091 Handleiding

26 November 2024
IFM

IFM TAD181 Handleiding

26 November 2024
IFM

IFM MK5344 Handleiding

15 November 2024
IFM

IFM OL5029 Handleiding

15 November 2024
IFM

IFM EVC284 Handleiding

15 November 2024
IFM

IFM OB5022 Handleiding

15 November 2024
IFM

IFM AL4302 Handleiding

15 November 2024
IFM

IFM AC1006 Handleiding

12 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd