IFM E20867 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM E20867 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Montieren Sie zwei passende Nutsteine (nicht im Lieferumfang) in der Nut des
Aluprofils. Befestigen Sie den Halter (a) mit den beiden Schrauben (b) und schieben
Sie den Gewindewürfel (c) hinein. Drehen Sie die Schraube (d) in den Gewindewürfel
und kontern Sie die Schraube mit der Mutter (e).
Ziehen Sie nach Montage und Ausrichtung des Sensors die Schraube (g) fest.
Befestigen Sie den Haltewinkel (i) und ziehen Sie anschließend die Schraube (g)
soweit an, daß sich der Winkel noch drehen läßt.
Montieren Sie die beiden Schellenhälften (f) lose mit Hilfe der beiliegenden Schraube
(g) und Mutter (h).
Montageanleitung Montagesatz Aluprofil
Installation instructions mounting kit
for aluminium profile
Notice de montage kit de montage pour
profil aluminium
701469/00 02/00 ifm electronic gmbh . Friedrichstraße 1 . D 45128 Essen
1
2
3
4
Fasten the two parts of the mounting clamp (f) loosely by means of the screw (g)
and the nut (h) supplied.
Monter les deux parties de la bride de fixation (f) provisoirement à l'aide de la vis
(g) et de l'écrou (h) livrés.
Attach the mounting bracket (i) and then tighten the screw (g) in such a way that
the bracket can still be turned.
Fixer l'équerre de fixation (i) et ensuite visser la vis (g) de façon que l'équerre puisse
toujours être tournée.
Tighten the screw (g) fully after the sensor has been mounted and aligned.
Serrer la vis (g) définitivement après avoir monté et aligné la cellule.
Mount two suitable slot nuts (not supplied) into the slot of the aluminium profile.
Fasten the bracket (a) with the two screws (b) and insert the threaded cube (c). Turn
the screw (d) into the threaded cube and lock it with the nut (e).
Monter deux écrous appropriés (non fournis) dans la rainure du profil aluminium.
Fixer la bride (a) avec les deux vis (b) et insérer le cube fileté (c). Tourner la vis (d)
dans le cube fileté et la bloquer avec l'écrou (e).
(i)
(g)
(f)
(g)
(h)
(g)
(a)
(b)
(c)
(d)
(e)


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E20867

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E20867 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM AL2507 Handleiding

10 Februari 2025
IFM

IFM AL2607 Handleiding

10 Februari 2025
IFM

IFM MK5361 Handleiding

10 Februari 2025
IFM

IFM AE3400 Handleiding

28 Januari 2025
IFM

IFM DTE932 Handleiding

28 Januari 2025
IFM

IFM DTE931 Handleiding

28 Januari 2025
IFM

IFM DTE934 Handleiding

28 Januari 2025
IFM

IFM EVF729 Handleiding

28 Januari 2025
IFM

IFM EVT728 Handleiding

28 Januari 2025
IFM

IFM ID5058 Handleiding

28 Januari 2025

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd