IFM DP4200 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM DP4200 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
Operating instructions
Analogue threshold display (IP 69K)
DP4200
11556770 / 0010 / 2023
GB
DP4200 Analogue threshold display (IP 69K)
2
Contents
1 Preliminary note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Warnings.............................................................. 3
1.3 Safety symbol on the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Intended use................................................................ 5
3.1 Block diagram.......................................................... 5
4 Function ................................................................... 6
4.1 Use as a stand-alone device without IO-Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2 Application as an IO-Link device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2.1 General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2.2 Application example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.2.3 Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.2.4 IO Device Description (IODD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5 Installation.................................................................. 8
6 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.1 Input side ............................................................. 9
6.2 Connecting the device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.2.1 Mounting the connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.2.1.1 Maximum cable length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7 Operating and display elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.1 LEDs................................................................. 11
7.2 Display ............................................................... 11
7.2.1 Representation of the measured current value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8 Menu...................................................................... 13
8.1 General............................................................... 13
8.2 Parameters adjustable via IO-Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8.2.1 SP1/rP1 ─ set point/reset point OUT1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8.2.2 FH1/FL1 ─ min/max switching limits for window function . . . . . . . . . . . . . . . . . . . . . 13
8.2.3 A.Trm ─ analogue termination for OUT2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.2.4 ou1 ─ output function for OUT1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.2.5 dS1/dr1 ─ switching delay/switch-off delay for OUT1 . . . . . . . . . . . . . . . . . . . . . . . . 14
8.2.6 ScAL ─ scaling of the displayed value. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.2.7 C.ASP/C.AEP - customer-specific analogue start/end point . . . . . . . . . . . . . . . . . . . 15
8.2.8 coLr ─ display colours and colour changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.2.9 cFH/cFL ─ upper/lower value for colour change . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8.2.10 diS ─ refresh rate of the displayed measured value . . . . . . . . . . . . . . . . . . . . . . . . . 16
8.2.11 Lo/Hi ─ min/max measured input values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.2.12 dAP ─ damping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.2.13 C.uni – customer-specific unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.2.14 Application-specific tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
9 Operation .................................................................. 18
9.1 Functions output 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
9.2 Functions output 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
11 Maintenance, repair and disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Analogue threshold display (IP 69K) DP4200
3
1 Preliminary note
You will find instructions, technical data, approvals and further information using the QR code on the
unit / packaging or at .documentation.ifm.com
1.1 Symbols used
Requirement
Instructions
Reaction, result
[...] Designation of keys, buttons or indications
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note
1.2 Warnings
Warnings indicate the possibility of personal injury and damage to property. This enables safe product
handling. Warnings are graded as follows:
WARNING
Warning of serious personal injury
wIf the warning is not observed, fatal and serious injuries are possible.
CAUTION
Warning of minor to moderate personal injury
wIf the warning is not observed, minor to moderate injuries are possible.
ATTENTION
Warning of damage to property
wIf the warning is not observed, damage to property is possible.
1.3 Safety symbol on the device
Safety symbol on the device:
uAdhere to the operating instructions for the safe operation of the
unit.


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: DP4200

Heb je hulp nodig?

Als je hulp nodig hebt met IFM DP4200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM MK5344 Handleiding

15 November 2024
IFM

IFM OL5029 Handleiding

15 November 2024
IFM

IFM EVC284 Handleiding

15 November 2024
IFM

IFM OB5022 Handleiding

15 November 2024
IFM

IFM AL4302 Handleiding

15 November 2024
IFM

IFM AC1006 Handleiding

12 November 2024
IFM

IFM AC1345 Handleiding

12 November 2024
IFM

IFM CR3122 Handleiding

12 November 2024
IFM

IFM DV1531 Handleiding

12 November 2024
IFM

IFM DV1501 Handleiding

12 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd