IFM AL1900 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM AL1900 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Operating instructions
IO-Link master
AL19xx
11476626/00 08/2022
UK
2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
• The device described is a subcomponent for integration into a system.
- The manufacturer is responsible for the safety of the system.
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system. This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system.
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose (→ Functions and features).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, programming, configuration, operation
and maintenance of the product must be carried out by personnel qualified and
authorised for the respective activity.
• Protect units and cables against damage.
3 Functions and features
The IO-Link master modules serve as a gateway between intelligent IO-Link
sensors and the field bus. The units with protection rating IP 20 are designed as a
control cabinet module for use in plant construction.
3
UK
4 Symbols used
â–ºInstruction
Important note
Non-compliance may result in malfunction or interference.
4.1 Warnings used
WARNING
Warning of serious personal injury.
Death or serious irreversible injuries may result.
4.2 Safety symbols on the device
General warning on the device.
When this symbol appears, consider the corresponding section in the operating
instructions.
5 Installation
â–ºDisconnect power before installation.
â–ºMount the unit in a control cabinet with a protection rating of at least IP 54 to
ensure protection against accidental contact with dangerous contact voltages
and against external influence. The control cabinet has to be installed in
accordance with local and national regulations.
â–ºMount the unit vertically on a DIN rail.
â–ºLeave enough space between the unit and the top or bottom of the control
cabinet as well as to adjacent devices to enable air circulation and to avoid
inadmissible heating.
5.1 Installation instructions
Electrostatic discharge
The device contains components that can be damaged or destroyed by
electrostatic discharge.
â–ºWhen handling the device, observe the necessary safety precautions against
electrostatic discharge (ESD).
â–ºOnly operate the device when mounted on a grounded DIN rail.


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: AL1900

Heb je hulp nodig?

Als je hulp nodig hebt met IFM AL1900 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM TAD981 Handleiding

26 November 2024
IFM

IFM TAD961 Handleiding

26 November 2024
IFM

IFM TAD091 Handleiding

26 November 2024
IFM

IFM TAD181 Handleiding

26 November 2024
IFM

IFM MK5344 Handleiding

15 November 2024
IFM

IFM OL5029 Handleiding

15 November 2024
IFM

IFM EVC284 Handleiding

15 November 2024
IFM

IFM OB5022 Handleiding

15 November 2024
IFM

IFM AL4302 Handleiding

15 November 2024
IFM

IFM AC1006 Handleiding

12 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd