IFM AC1324 Handleiding

IFM Niet gecategoriseerd AC1324

Lees hieronder de πŸ“– handleiding in het Nederlandse voor IFM AC1324 (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/9
Installation instructions
AS-i Controllere
AC1318
AC1324
7390779 / 01 05 / 2011
UK
1 2345
2
1 Functions and features
β€’ξ˜ƒ The controllere (AC1318 / AC1324 ) integrates one or two AS-i masters, both
according to the AS-i version 3.0, a mini controller and a DeviceNet interface.
β€’ξ˜ƒ It controls the exchange of data to the sensor / actuator level
β€’ξ˜ƒ processes the peripheral data in the integrated processor (signal preprocess-
ing),
β€’ξ˜ƒ works as stand-alone controller with exchange of data to the PC (visualisation),
β€’ξ˜ƒ communicates with the higher control level (in the gateway mode).
2 Programming interface RS232C
β€’ξ˜ƒ Baud rate 4,800 to 115,200 baud
β€’ξ˜ƒ Max. distance between controllere and PC: 20 m
β€’ξ˜ƒ Potential separation from the controllere power supply
β€’ξ˜ƒ Programming cable E70320 for connection to PC required
Contents
1 Functions and features 2 ........................................................................................
2 Programming interface RS232C 2 ..........................................................................
3 DeviceNet interface 3 .............................................................................................
4 Installation............................................................................................................3
5 Electrical connection 3 ............................................................................................
6 Operating and display elements 4 ..........................................................................
6.1 LED indicators and pin connection 5 ................................................................
6.2 Contrast setting 6 .............................................................................................
7 Operation .............................................................................................................6
7.1 Menu overview 6 ..............................................................................................
7.2 Menu navigation 7 ............................................................................................
3
UK
3 DeviceNet interface
β€’ξ˜ƒ Baud rate 125 k, 250 k and 500 kbit / s
β€’ξ˜ƒ Max. distance between controllere and host: depending on the baud rate
β€’ξ˜ƒ Potential separation from the controllere power supply
β€’ξ˜ƒ Up to 64 controllers connected in parallel
β€’ξ˜ƒ Pin connection:
Pin 1: V-; Pin 2: CAN_L; Pin 3: Shield; Pin 4: CAN_H; Pin 5: V+
4 Installation
Fix the controllere onto a 35 mm DIN rail which has an electrically safe ground
connection. The protection rating of the unit is IP 20, therefore it should be
mounted in a protected location (e. g. control cabinet).
Ensure a condensation-free environment. Avoid excessive dust, vibration
and shock. The air circulation through the vents must not be impeded.
Avoid installation in direct vicinity of frequency inverters.
5 Electrical connection
Disconnect the installation from power. Connect the unit as indicated on the
terminals. Never connect the minus potentials to each other or the minus
potentials to the FE connection. Ensure an electrically save ground connec-
tion between AS-i controllere (terminal FE) and ground of the unit.
Disconnect the power supply before connecting the controllere.
To operate an AS-i system a special AS-i power supply is required. Connection is
made to the terminals AS-i + and AS-i -.
The AS-i system is operated ungrounded. AS-i + and AS-i - are to be
symmetrical to the ground potential of the installation.
Ensure a low-resistance connection of the symmetry point of the AS-i
power supply (terminal "shield") to the ground of the installation.
Supply the controllere with an additional 24 V DC voltage (20...30V PELV). The
connection is made to the terminals +24 V and 0 V.

Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: AC1324

Heb je hulp nodig?

Als je hulp nodig hebt met IFM AC1324 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd IFM

IFM

IFM MK5344 Handleiding

15 November 2024
IFM

IFM OL5029 Handleiding

15 November 2024
IFM

IFM EVC284 Handleiding

15 November 2024
IFM

IFM OB5022 Handleiding

15 November 2024
IFM

IFM AL4302 Handleiding

15 November 2024
IFM

IFM AC1006 Handleiding

12 November 2024
IFM

IFM AC1345 Handleiding

12 November 2024
IFM

IFM CR3122 Handleiding

12 November 2024
IFM

IFM DV1531 Handleiding

12 November 2024
IFM

IFM DV1501 Handleiding

12 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024