Ideal 30-793 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ideal 30-793 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Compression Connector Installation
Solutions
XR™ InSITE® RTQ™ NJX™ TLC™ OmniConn™
WW W.I DEALI N D.C OM
Compression solutions for
coaxial cables used in HD video
and security applications
Xtended Range RTQ™ XR™NEW
F Connector
InSITE®, NJX™ and TLC™ models
Right Angle F and BNC
connectors
F/BNC/RCA/RG-11 F-Connectors
36compression optimizes RF
performance and mechanical
strength for a permanent
connection
Compression solutions for
outdoor, indoor and tool-less
installations
Featuring a 36 clear site window that
simplifies the connector to cable installation
process for fast, confident, and consistent
terminations
The NEW RTQ™ XR™ F Compression
Connector accepts RG-6, RG-6 Quad,
RG-6 Plenum and RG-6 Quad Plenum
33-793 Pro XL
Compression Hip
Kit
RG-11
RG-6/6Q
Plenum
RG-11
Plenum
Made in U.S.A. of
U.S. and Global
Components
InSITE
®
Compression Connectors
Installing one-piece compression BNC and right angle connectors
just got easier. No more uncertainty when inserting the cable into the
connector. No more collapsed center pins. No more wasted connectors
and rework time on the job.
With the patented InSITE® Technology feature, standard on our BNC and
right angle (90°) compression connectors, field termination of these
blind entry connectors is simpler, faster and now provides a higher
performance connection for all applications from CCTV to HD Video.
The InSITE® window is a 360° clear window which allows the installer
to verify that the prepped cable has been inserted far enough into the
connector to make contact with the fixed pin. The cable, which requires a
1/4“ x 1/4“ industry standard preparation, is inserted into the connector
until the folded braiding is visible within the InSITE ® window. No
measuring, no jacket marking, no guesswork.
In addition to the InSITE® feature, other improvements include:
Increased compatible ranges of cable jacket diameters
Lower cable insertion force
A redesigned funneled pin entry - centers angled pins
Accepts 23-18 AWG solid center conductor pins
Smoother and easier mating with sockets through increased
BNC head travel range
Better return loss performance: >35dB up to 1GHz, >25dB
up to 2GHz, >20dB up to 3GHz
Improved contact accepts
23-18 AWG solid center conductors
External color band for
series identification
Patented 360° InSITE®
clear window for
confident insertion
Patented compression sleeve adapts
to a wide range of cable sizes
Weatherproof
back seal
Funneled entry centers
angled pins
Nickel plated brass
body
Gold plated fixed pin
will not fall out
Extended head travel
range to ensure plug to
socket mating
Multiple
compression
surfaces
New dielectric design for
improved RF performance
Dual “O” rings 7/16 in. Hex nut
InSITE® Technology gives installers a large, clear 360° visual indication that the
coax cable has been correctly and completely inserted into the connector. Unlike
connectors that use a sliding center pin contact as an indicator, the gold plated
center pin in the InSITE® is fixed. The center pin will not fall out of the connector
during transport or become loose after repeated connection cycles. The pin can handle a wide 23-18 AWG solid conductor
range so fewer connectors are needed for specialty and application specific cables.
All InSITE® connectors feature our patented RTQ™ compression sleeve giving each of these connectors a
weatherproof seal at the cable entry point, keeping out moisture and other contaminants that compromise the
mechanical and electrical performance of the connection.
All InSITE® connectors have a 360° compression design which keeps the round dielectric geometry intact and keeps the
75 impedance matching to a maximum, resulting in better return loss and lower insertion loss.Ω
After compression, all InSITE® Connectors have a robust, all-brass exterior.
BNC head design allows the InSITE® to mate smoother and easier with the many variations of female BNC connectors
found on CCTV cameras, A/V equipment and instrumentation.
InSITE® RG-59InSITE® RG-59
Plenum
InSITE® RG-6 InSITE® RG-6
BNC 90°
InSITE® RG-59
BNC 90° InSITE® RG-6
F 90°
he New RTQ™ XR™ Xtended Range F connector has been designed to work on RG-6 coax cables
ncluding Plenum versions. One connector now handles RG-6/RG-6 Quad/RG-6 Plenum and
RG-6 Quad Plenum. This universal cable range enables the installer to carry a single connector
when working with multiple cable types.
xteriors and a patented compression sleeve. The F connectors incorporate an inner O-ring for a
bout any application - indoors or outdoors for installations from 5MHz to 3GHz, including CATV,
satellite, HDTV and other A/V based applications.
All RTQ™ XR™ and RTQ™ connectors require a standard 1/4” x 1/4” cable preparation and are permanently attached to the cable when using the
IDEAL OmniSeal™ Pro XL or LinearX®3 compression tool.
RTQ™XR™ RTQ™and F & RCA Compression Connectors
RTQ XR F RG-6 RTQ RCA RG-6 RTQ RCA RG-59
RTQ F RG-59
Internal plastic adapter sleeve provides
watertight protections
All brass, nickel-plated construction New mandrel to accept standard and Plenum
rated coax 33-639
Pro Compression Starter Kit
Starter kit includes 30-793
OmniSeal™ Pro XL
Compression Tool, Coax
PrepPRO
®
, Data T
®
-Cutter,
and an assortment of
InSITE
®
and RTQ™
compression connectors
and adapters for HD
Video and Security
applications.


Product specificaties

Merk: Ideal
Categorie: Niet gecategoriseerd
Model: 30-793

Heb je hulp nodig?

Als je hulp nodig hebt met Ideal 30-793 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Ideal

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd