Icom IC-R75 Handleiding

Icom Receiver IC-R75

Lees hieronder de 📖 handleiding in het Nederlandse voor Icom IC-R75 (46 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/46
INSTRUCTION MANUAL
COMMUNICATIONS RECEIVER
iR75
i
IMPORTANT
READ THIS INSTRUCTION MANUAL
CAREFULLY before attempting to operate the re-
ceiver.
SAVE THIS INSTRUCTION MANUAL. This
manual contains important safety and operating in-
structions for the IC-R75.
EXPLICIT DEFINITIONS
RNEVER apply AC to the [DC13.8V] jack on the re-
ceiver rear panel. This could cause a fire or ruin the re-
ceiver.
RNEVER apply more than 16 V DC, such as a 24 V
battery, to the [DC13.8V] jack on the receiver rear
panel. This could cause a fire or ruin the receiver.
RNEVER let metal, wire or other objects touch any
internal part or connectors on the rear panel of the re-
ceiver. This may result in an electric shock.
NEVER expose the receiver to rain, snow or any liq-
uids.
AVOID using or placing the receiver in areas with tem-
peratures below 10°C (+14°F) or above +60°C
(+140°F). Be aware that temperatures on a vehicle’s
dashboard can exceed 80°C (+176°F), resulting in per-
manent damage to the receiver if left there for ex-
tended periods.
AVOID placing the receiver in excessively dusty envi-
ronments or in direct sunlight.
AVOID placing the receiver against walls or putting
anything on top of the receiver. This will obstruct heat
dissipation.
Place unit in a secure place to avoid inadvertent use by chil-
dren.
During mobile operation, operate the receiverDO NOT
without running the vehicle’s engine. When receiver
power is ON and your vehicle’s engine is OFF, the ve-
hicle’s battery will soon become exhausted.
Make sure the receiver power is OFF before starting
the vehicle. This will avoid possible damage to the re-
ceiver by ignition voltage spikes.
The receiver comes with the following accessories.
Qty.
q AC adapter (AD-55/A/V)* ..................................... 1
wDC power cable (OPC-869)* ............................... 1
eFuse (FGB 3 A; internal use) ............................... 1
rFuse (FGB 3 A; for DC cable)* ............................ 2
* Either AC adapter + 1 fuse (q e, ) or DC power cable + 3
fuses (w, , e r) are supplied depending on versions.
PRECAUTIONS
SUPPLIED ACCESSORIES
Versions of the IC-R75 which display the “CE” symbol on
the serial number seal comply with the European har-
monised standard ETS300 684 (EMC product standard
for Commercially Available Amateur Radio Equipment).
WORD
R
WARNING
CAUTION
NOTE
DEFINITION
Personal injury, fire hazard or electric
shock may occur.
If disregarded, inconvenience only.
No risk of personal injury, fire or
electric shock.
Equipment damage may occur.
q w
e r
1
1
TABLE OF CONTENTS
IMPORTANT .............................................................. i
EXPLICIT DEFINITIONS ........................................... i
PRECAUTIONS ........................................................ i
SUPPLIED ACCESSORIES ...................................... i
1 TABLE OF CONTENTS ....................................... 1
2 PANEL DESCRIPTION ................................... 2 6
Front panel ........................................................ 2
Function display ................................................ 5
Rear panel ......................................................... 6
3 INSTALLATION AND CONNECTIONS ......... 7 10
Grounding .......................................................... 7
Receiver stand .................................................. 7
Optional bracket and carrying handle ................ 7
Connections ...................................................... 8
Antenna connection ........................................... 9
Tape recorder connections ................................ 9
Transceive function ........................................... 9
FSK and AFSK (SSTV) connections ............... 10
Connecting to a PC ......................................... 10
4 FREQUENCY SETTING .............................. 11 13
Read me rst ................................................... 11
Using the keypad ............................................. 11
Frequency setting ............................................ 12
Dial lock function ............................................. 13
5 RECEIVE FUNCTIONS ............................... 14 20
Mode selection ................................................ 14
Squelch and RF gain ....................................... 14
Twin PBT operation ......................................... 15
Noise blanker .................................................. 15
Preamp ............................................................ 16
Attenuator ........................................................ 16
AGC time constant .......................................... 16
Antenna selection ............................................ 16
CW reverse mode ........................................... 17
CW pitch control .............................................. 17
RTTY reverse mode ........................................ 17
Filter selection ................................................. 18
Filter set mode ................................................. 19
Optional noise reduction function .................... 20
Optional auto notch function ............................ 20
6 MEMORY OPERATION ............................... 21 24
Memory channels ............................................ 21
Memory channel selection ............................... 21
Memory channel programming ........................ 22
Frequency transferring .................................... 23
Memory names ................................................ 24
Memory clearing .............................................. 24
7 SCANS ........................................................ 25 27
Scan types ....................................................... 25
Preparation ...................................................... 25
Programmed scan operation ........................... 26
Memory/select memory scan operation .......... 26
Setting select memory channels ..................... 26
Priority watch operation ................................... 27
Auto memory write scan operation .................. 27
8 CLOCK AND TIMERS ................................. 28 29
Setting the current time ................................... 28
Setting power-on time ..................................... 28
Setting power-off time ...................................... 29
Setting sleep timer period ................................ 29
9 SET MODE .................................................. 30 33
Set mode description ....................................... 30
10 OPTION INSTALLATIONS ....................... 34 35
Opening the receivers case ............................ 34
CR-282 HIGH STABILITY CRYSTAL UNIT .......... 34
UT-102 .................. 34VOICE SYNTHESIZER UNIT
UT-106 ............................................. 35DSP UNIT
Optional IF lters ............................................. 35
11 MAINTENANCE ........................................ 36 37
Troubleshooting ............................................... 36
Resetting the CPU ........................................... 36
Fuse replacement ............................................ 37
Clock backup battery replacement .................. 37
12 SPECIFICATIONS ........................................... 38
13 OPTIONS ......................................................... 39
14 CONTROL COMMAND ............................ 40 43
Remote jack (CI-V) information ....................... 40


Product specificaties

Merk: Icom
Categorie: Receiver
Model: IC-R75

Heb je hulp nodig?

Als je hulp nodig hebt met Icom IC-R75 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Icom

Handleiding Receiver

Nieuwste handleidingen voor Receiver