Icom IC-F7000 Handleiding

Icom Receiver IC-F7000

Lees hieronder de 📖 handleiding in het Nederlandse voor Icom IC-F7000 (68 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/68
HF TRANSCEIVER
iF7000
INSTRUCTION MANUAL
i
FOREWORD
Thank you for purchasing this Icom product. The IC-
F7000
HF TRANSCEIVER
is designed and built with
Icom’s superior technology and craftsmanship. With
proper care, this product should provide you with years
of trouble-free operation.
We want to take a couple of moments of your time to
thank you for making the IC-F7000 your radio of
choice, and hope you agree with Icom’s philosophy of
“technology rst.Many hours of research and devel-
opment went into the design of your IC-F7000.
D
FEATURES
ALE (Automatic Link Establishment)/Selcall
capability
Digital Signal Processor (DSP) allows flex-
ible filter selection
Full-dot matrix LCD for variety of informa-
tion indication
PC connection capability for remote control
IMPORTANT
READ THIS INSTRUCTION MANUAL
CAREFULLY before attempting to operate the
transceiver.
SAVE THIS INSTRUCTION MANUAL. This
manual contains important safety and operating in-
structions for the IC-F7000.
EXPLICIT DEFINITIONS
RWARNING RF EXPOSURE! This device
emits Radio Frequency (RF) energy. Extreme caution
should be observed when operating this device. If you
have any questions regarding RF exposure and safety
standards please refer to the Federal Communications
Commission Office of Engineering and Technology’s
report on Evaluating Compliance with FCC Guidelines
for Human Radio Frequency Electromagnetic Fields
(OET Bulletin 65).
RWARNING HIGH VOLTAGE! NEVER at-
tach an antenna or internal antenna connector during
transmission. This may result in an electrical shock or
burn.
RNEVER apply AC to the [DC13.8V] jack on the
transceiver front panel. This could cause a re or dam-
age the transceiver.
RNEVER apply more than 16 V DC, such as a 24 V
battery, to the [DC13.8V] jack on the transceiver front
panel. This could cause a fire or damage the trans-
ceiver.
RNEVER let metal, wire or other objects touch any
internal part or connectors on the front panel of the
transceiver. This may result in an electric shock.
RNEVER expose the transceiver to rain, snow or
any liquids.
AVOID using or placing the transceiver in areas with
temperatures below –1C (+1F) or above +6C
(+140°F). Be aware that temperatures on a vehicle’s
dashboard can exceed 80°C (+176°F), resulting in per-
manent damage to the transceiver if left there for ex-
tended periods.
AVOID placing the transceiver in excessively dusty en-
vironments or in direct sunlight.
AVOID placing the transceiver against walls or putting
anything on top of the transceiver. This will obstruct
heat dissipation.
Place unit in a secure place to avoid inadvertent use
by children.
During mobile operation, operate the trans-DO NOT
ceiver without running the vehicle’s engine. When the
transceiver’s power is ON and your vehicle’s engine is
OFF, the vehicles battery will soon become ex-
hausted.
Make sure the transceiver power is OFF before start-
ing the vehicle. This will avoid possible damage to the
transceiver by ignition voltage spikes.
BE CAREFUL! The rear panel will become hot when
operating the transceiver continuously for long periods.
USE Icom microphones only (supplied or optional).
Other manufacturer’s microphones have different pin
assignments, and connection to the IC-F7000 may
damage the transceiver.
DO NOT use chemical agents such as benzine or al-
cohol when cleaning, as they can damage the trans-
ceiver surface.
PRECAUTION
WORD DEFINITION
R
R
R
R
RWARNING Personal injury, re hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No
risk or personal injury, fire or electric
shock.
Icom, Icom Inc. and the are registered trademarks of
Icom Incorporated (Japan) in the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other
countries.
ii
FOREWORD ……………………………………………i
IMPORTANT …………………………………………… i
EXPLICIT DEFINITIONS ………………………… i
PRECAUTION ………………………………………… i
TABLE OF CONTENTS …………………………… ii
1 PANEL DESCRIPTION ………………………… 1–6
Front panel— Controller ………………………… 1
Front panel— Main unit ………………………… 3
Microphone (HM-155) ………………………… 4
LCD screen ……………………………………… 5
2 BASIC OPERATION ………………………… 7–11
Selecting a channel …………………………… 7
Scan function …………………………………… 8
Setting a frequency ……………………………… 9
Mode selection ………………………………… 10
Simple mode operation …………………… 10
Split frequency operation ……………………… 11
3 RECEIVE AND TRANSMIT ………………… 12–18
Basic voice transmit/receive ………………… 12
Functions for transmit ………………………… 13
Functions for receive ………………………… 15
CW operation …………………………………… 18
FSK operation ………………………………… 18
4 SELCALL/ALE OPERATION ……………… 19–30
Selcall/ALE ……………………………………… 19
5 CHANNEL/ID PROGRAMMING …………… 31–35
Programming a channel ……………………… 31
Programming an ID …………………………… 33
6 SET MODE …………………………………… 36–53
Quick set mode ………………………………… 36
Initial set mode ………………………………… 40
CPU reset ……………………………………… 53
7 CONNECTION AND INSTALLATION …… 54–50
Supplied accessories ………………………… 54
Connections …………………………………55
Ground connection …………………………… 56
Power source …………………………………… 56
Antenna ………………………………………… 57
Mounting ………………………………………… 58
Fuse replacement ……………………………… 60
Connector information ………………………… 61
8 SPECIFICATIONS ……………………………… 63
9 OPTIONS ………………………………………… 64
TABLE OF CONTENTS
1
2
3
4
5
6
7
8
9
PANEL DESCRIPTION
BASIC OPERATION
RECEIVE AND TRANSMIT
SELCALL /ALE OPERATION
CHANNEL/ID PROGRAMMING
SET MODE
CONNECTION AND INSTALLATION
SPECIFICATIONS
OPTIONS
Versions of the IC-F7000 which display
the “N33” symbol on the serial number
seal, comply with Standard Australia
Speci cation No. AS/NZS 4770: 2000.


Product specificaties

Merk: Icom
Categorie: Receiver
Model: IC-F7000

Heb je hulp nodig?

Als je hulp nodig hebt met Icom IC-F7000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Icom

Handleiding Receiver

Nieuwste handleidingen voor Receiver