I-Tec PCE2M2 Handleiding

I-Tec Powerline adapter PCE2M2

Lees hieronder de 📖 handleiding in het Nederlandse voor I-Tec PCE2M2 (16 pagina's) in de categorie Powerline adapter. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

i-tec PCI-E 2x M.2 Card (PCI-E/SATA)

with Low Profile Backplate

(GB) User Manual

(DE) Gebrauchsanweisung

(CZ) Manuál

(PL) Instrukcja

(SK) Manuál

(LT) Vadovas

ENGLISH

Internal PCI-E card for your desktop computer. Add fast SSD disk format M.2 to your system.

The card has one slot for M.2 SATA discs and one slot for M.2 PCI-E discs.

SPECIFICATION

 Allows simultaneous connection of M.2 SSD, 1x B key and 1x M key NGFF SSD via

PCI-E 4X interface

 Complies with PCI Express M.2 Specification 1.0.

 Complies with SATA 3.0 specification for the B key

 Complies with PCI-E 4X 3.0 specification for M key

 Support for data transfer speeds of up to 6 Gbps

 Support for SATA-based B key and PCI-E 4X-based M key NGFF SSD

 Support for sizes 2230, 2242, 2260, 2280 NGFF SSD

 Support for booting

 Support for Windows XP 32/64bit, Windows Vista 32/64bit, Windows 7 32/64bit,

Windows 8 32/64bit, Windows 8.1 32/64bit, Windows 10 32/64bit, Linux

CONNECTORS

 1x connector for SATA-based B key NGFF SSD

 1x SATA connector to the motherboard

 1x connector for PCI-E 4X-based M key NGFF SSD

PACKAGE CONTENTS

 i-tec PCI-E 2x M.2 Card

 Low profile backplate

 SATA cable

 Mount kit

 Manual

SYSTEM REQUIREMENTS

 Pentium compatible PC with a free PCIe 4X slot

 OS Windows XP 32/64bit, Windows Vista 32/64bit, Windows 7 32/64bit, Windows 8

32/64bit, Windows 8.1 32/64bit, Windows 10 32/64bit, Linux

DESCRIPTION OF THE DEVICE

PCIe card enabling connection to M.2 SSD. SATA-based B key and PCI-E 4X-based M key

NGFF SSD, both individually and simultaneously.

HARDWARE INSTALLATION

1. Turn off your PC and connected devices.

2. Disconnect power from the PC.

3. Remove the cover of the PC.

4. Remove the cover of the free PCIe slot.

5. Insert the appropriate M.2 SSD into the appropriate slot.

6. Insert the PCIe card into the appropriate slot.

7. In case SATA-based B key NGFF SSD is inserted, also connect SATA cable to the

SATA connector on the PCIe card and the other end to a free SATA connector on the

motherboard.

8. Attach the PCIe card with the screw.

INSTALLATION

Card is installed to the operating system automatically. Connected M.2 SSD are displayed as

additional units. In case a new, unformatted M.2 SSD is inserted, you must first format it in

the Disk Administrator.

FORMATING NEW M.2 SSD

1. Right-click on "My Computer".

2. Select "Manage".

3. Click on "Disk Management”

4. Select the "Unassigned" SSD with stated capacity of the inserted disc (shown by

several orders less).

5. Right-click on the area of the disk and select "New Simple Volume", click "Next".

6. Keep the volume size to maximum and click "Next".

7. Select "Assign a drive letter" and click "Next".

8. Select "Format this volume with the following settings" (leave the default). Click

"Next" and "Finish".

9. The SSD will be formatted. Formatting time depends on the size of the SSD, the

SSD is then visible in the system.

USING M.2 SSD AS A BOOT DISK

M.2 SSD can be used to install the operating system. In this case, follow the instructions of

the installer of the appropriate operating system. Also set the appropriate disk as a boot in

the motherboard BIOS.

Product specificaties

Merk:	I-Tec
Categorie:	Powerline adapter
Model:	PCE2M2
Kleur van het product:	Rood
Gewicht:	39 g
Breedte:	120 mm
Diepte:	19 mm
Hoogte:	92 mm
Gewicht verpakking:	168 g
Breedte verpakking:	195 mm
Diepte verpakking:	52 mm
Hoogte verpakking:	170 mm
Gebruikershandleiding:	Ja
Meegeleverde kabels:	SATA
Ondersteunt Windows:	Ja
Intern:	Ja
Ondersteunt Linux:	Ja
Hostinterface:	PCIe
Montagebeugels meegeleverd:	Ja
Data transfer snelheid (max):	32 Gbit/s
Aantal Internal SATA ports:	2
SATA herziening:	3.0
Output interface:	M.2