I-PRO WV-U1532LA Handleiding

I-PRO Bewakingscamera WV-U1532LA

Lees hieronder de 📖 handleiding in het Nederlandse voor I-PRO WV-U1532LA (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

About the user manuals

Product documentation is composed of the following documents.

• Installation Guide (this document): Provides information about “Precautions”,

“Precautions for installation” and the installation method.

• Basic Information (in the following manual website): Provides information about

“Precautions for use” and “Detail specifications”.

• Operating Instructions (in the following manual website): Explains how to

perform the settings and how to operate this camera.

https://i-pro.com/global/en/surveillance/documentation_database

Standard accessories

*1 This label may be required for network management. Use caution not to lose this label.

Other items that are needed (not included)

• Fixing screw

Installation method

Recommended

screw*1 Minimum pull-out

strength*2

Directly mount the camera onto the ceiling or wall.

M4 × 16 mm {5/8 inches} *3/

4pcs. 724 N {163 lbf}

Mount the camera to a gangbox/ junction box.

M4 × 16 mm {5/8 inches} *3 *4/

4pcs. 724 N {163 lbf}

Mount the camera using the

WV-QJB500-W

M4 screws/ 4pcs.

(accessory of WV-QJB500-W)

1.37 N·m {1.01

lbf ft}

Mount the camera using the exclusively designed

mount bracket (See “Optional accessories”).

Refer to the operating instructions of each bracket.

*1 Select screws according to the material of the location that the camera will be mounted to. In this case,

wood screws and nails should not be used.

*2 This value indicates the minimum pull-out strength required value per screw.

For information about the

minimum pull-out strength, refer to our support website <Control No.: C0120>.

*3 The screw length is an example when installing the camera on a robust installation surface with a thick-

ness of 20 mm {25/32 inches} or more.

*4 PrepareaM4screwwithawasherwithadiameterof7.5mm{9/32inches}to10mm{13/32inches}

and a spring washer.

Optional accessories*1

•RJ45 plug, Ethernet cable (category 5e or better, straight, all 4 pairs (8 pins))

• Tools

Gangbox/ Junction box

Directly mount

Adapter box

Installation Guide (this document) 1 pc. .....................

IMPORTANT SAFETY INSTRUCTIONS 1 pc. .............

Code label*1...................................................... 1 pc.

The following parts are used during installation procedures.

RJ45 waterproof connector cover 1 pc. ....................

RJ45 waterproof connector cap 1 pc. .......................

Model No. WV-U1542LA

WV-U1532LA

Ns0821-1042

Printed in China

Installation Guide

Included Installation Instructions

Network Camera

For professional use only

Outdoor use

"<Control No.: C****>" used in these documents should be used to search for information

on our support website (https://i-pro.com/global/en/surveillance/training_support/support/

technical_information) and will guide you to the right information.

WV-U1542LA

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used

electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to

applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment.

For more information about collection and recycling, please contact your local authority.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it complies with the

requirement set by the Directive for the chemical involved.

NOTE: This equipment has been tested and found to

comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference when the equipment is

operated in a commercial environment. This equip-

ment generates, uses, and can radiate radio frequen-

cy energy and, if not installed and used in accor-

dance with the instruction manual, may cause harm-

ful interference to radio communications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case the

user will be required to correct the interference at his

own expense.

FCC CAUTION: Changes or modifications not

expressly approved by the party responsible for com-

pliance could void the user's authority to operate the

equipment.

Supplier’s Declaration of conformity

Trade name : i-PRO

Model No. : WV-U1542LA,

WV-U1532LA

Responsible Party :

i-PRO Americas Inc.

8550 Fallbrook Drive, Suite 200 Houston,

Texas 77064

Support Contact : 1-800-513-5417

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

The model number and serial number of this prod-

uct may be found on the surface of the unit.

You should note the model number and serial num-

ber of this unit in the space provided and retain this

book as a permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

For U.S.A.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

For U.S.A.

Méthode d’installation Visdexation

recommandée

La capacité de traction

minimale requise

Quand la caméra vidéo

est directement installée

au plafond ou sur le mur.

M4 × 16 mm {5/8 pouces}/ 4 él.

M5 × 16 mm {5/8 pouces}/ 4 él.

724 N {163 lbf}

: Direct current symbol

■ Do not insert any foreign objects.

Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside the unit.

Turn the power off immediately and contact qualified service personnel for service.

■ Do not use this product in an inflammable atmosphere.

Failure to observe this may cause an explosion resulting in injury.

■ Avoid installing this product in the locations where salt damage occurs or corrosive gas is produced.

Otherwise, the mounting portions will deteriorate and injury or accidents due to a fall of the product may occur.

■ Do not strike or give a strong shock to this product.

Failure to observe this may cause injury or fire.

■ Keep microSD memory cards away from infants and children.

Otherwise, they may swallow the cards by mistake.

In this case, consult a doctor immediately.

■ Do not hang down from this product or use this product as a pedestal.

Failure to observe this may cause injury or accidents.

■

Do not install this product on a place that is greatly influenced by wind.

Installation on a place where the wind speed is 60 m/s {approx. 134 mph} or more may cause a fall of the product

resulting in injury or accidents.

■ Do not sprinkle more water, exceeding the performance limit of waterproof with a high pressure

cleaning machine, etc.

Fire or electrical shock may be caused by immersion.

■ Do not attempt to disassemble or modify this product.

Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections.

■ Do not install or clean the camera, or touch this product, the power cable or the connected cables

during thunder storms.

Failure to observe this may cause electric shock.

■ Refer installation work to the dealer.

Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or

damage to the product.

Be sure to consult the dealer.

■ Stop the operation immediately when something is wrong with this product.

When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product

has deteriorated, continued use will cause a fire or fall of the product resulting in injury, or damage to the product.

In this case, turn the power off immediately and contact qualified service personnel for service.

■ Select an installation area that can support the total weight.

Selecting an inappropriate installation surface may cause this product to fall down or topple over, resulting in injury or

accidents. Installation work shall be started after sufficient reinforcement.

■ Periodic inspections shall be conducted.

Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents.

Consult the dealer for the inspections.

■ The exclusively designed mount bracket shall be used.

Failure to observe this may cause a drop resulting in injury or accidents.

Use the exclusively designed mount bracket for installation.

■ The screws and bolts must be tightened to the specified torque.

Failure to observe this may cause a drop resulting in injury or accidents.

■ Turn the power off when do wiring of this product.

Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire.

■ Install this product in a location high enough to avoid people and objects from bumping the product.

Failure to observe this may cause injury.

■ Do not install this product in locations subject to vibration.

Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents.

■ Correctly perform all wiring.

Short circuits in the wiring or incorrect wiring may cause fire or electrical shock.

■ The measures of protection against snowfall shall be taken.

Weight of snow may cause a fall of the product resulting in injury or accidents. Protect the product against snowfall

by installing it under eaves.

■ Install the product securely on a wall or a ceiling in accordance with the installation instructions.

Failure to observe this may cause injury or accidents.

■ Do not rub the edges of metal parts with your hand.

Failure to observe this may cause injury.

■ When adjusting the angle, do not touch the movable parts by hand.

Doing so may cause fingers to get caught, resulting in an injury.

■ Turn the power off when cleaning this product.

Failure to observe this may cause injury.

About notations

The following notations are used when describing the functions limited for specified models.

The functions without the notations are supported by all models.

U1542

The functions with this notation are available when using the model WV-U1542LA (4M pixel model).

U1532

The functions with this notation are available when using the model WV-U1532LA (Full HD model).

Trademarks and registered trademarks

• Microsoft, Windows, Windows Media, Internet Explorer, Microsoft Edge, and ActiveX are either registered trade-

marks or trademarks of Microsoft Corporation in the United States and/or other countries.

• Intel and Intel Core are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.

• Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe in the United States and/or

other countries.

• microSDXC Logo is a trademark of SD-3C, LLC.

• iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

• Android and Google Chrome are trademark of Google LLC.

• Firefox is a trademark of the Mozilla Foundation in the US and other countries.

• The word "QR Code" is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

• All other trademarks identified herein are the property of their respective owners.

Troubleshooting

Before requesting service, refer to “Troubleshooting” of Basic Information and Operating Instructions. Then, confirm

the trouble.

Precautions for installation

■ In order to prevent injury, the product must be securely mounted to a wall or ceiling according to

Installation Guide.

■ Installation area for this product

Select an appropriate place for the installation area (such as a strong wall or ceiling) in your particular environment.

• Make sure that the installation area is strong enough to hold this product, such as a concrete ceiling.

• Install the camera in the foundation area of the architecture or where sufficient strength is assured.

• Do not mount the product on a plaster board or a wooden section because they are too weak. If the product is

unavoidably mounted on such a section, the section shall be sufficiently reinforced.

■ Do not place this product in the following places

• Locations where a chemical agent is used such as a swimming pool

• Locations subject to moisture or oil smoke such as a kitchen

• Locations that have a specific environment that is subject to an inflammable atmosphere or solvents

• Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated

• Locations near coasts directly subjected to sea breezes, or locations subject to corrosive gases such as from hot

springs, volcanic regions, etc.

• Locations where the temperature is not within the specified range

• Locations subject to vibrations, such as on vehicles, marine vessels, or above product lines (This product is not

designed for on-vehicle use.)

• Locations subject to condensation as the result of severe changes in temperature

• Locations near rubber products (packing, rubber feet, etc.)

■ Screw tightening

Do not use an impact driver. Use of an impact driver may damage the screws or cause tightening excessively.

■ About reflection of light from outside or IR light

A ghost may appear on the screen depending on the incident angle of external light.



In the case of using the IR light, installation of a camera near a wall may cause reflection of infrared rays resulting in

a part of the screen or the entire screen turning whitish.

• Refer to our support website <Control No.: C0109> for image examples and measures to take.

■ Take notice of humidity

Install this product when the humidity is low. If installation is performed when it is raining or in very humid conditions,

the inside may be affected by humidity, causing mist-over inside the

front panel

■ Protection from lightning

When cables are used outdoors, there is a chance that they may be affected by lightning. In such a case, install a

lightning arrestor close to the camera, and make the length of the network cable between the camera and lightning

arrestor as short as possible to prevent the camera from being affected by lightning.

■ When noise disturbance may happen

Noise may appear in video or audio near a strong electric field from a TV or radio antenna, motors and transformers,

or a strong electric field/magnetic field from a power line (lamp line) of AC100 V or more. Conduct the power distri-

bution work to keep 1 m {3.28 feet} away from them or conduct the electric conduit work using metal pipes. (Be

sure to make ground connection of the metal pipes.)

■ Make sure to remove this product if it will no longer be used.

■ This product has no power switch.

When turning off the power, disconnect the power supply from the PoE device.

■About the battery

A battery is installed inside the camera. Do not leave the battery exposed in environments of excessive heat as a

result of sunlight or fire.

■ Equipment classification and power source indication label

Refer to the indication label on the bottom side of this unit for the equipment classification, power source, and other

information.

Open Source Software

• This product contains open source software licensed under GPL (GNU General Public License), LGPL (GNU

Lesser General Public License), etc.

• Customers can duplicate, distribute and modify the source code of the software under license of GPL and/or LGPL.

• For details concerning licensing and source code of open source software, click “Click here for OSS information” on

“Support” page of the setup menu of this product and read the displayed content.

• Please note that we shall not respond to any inquiries regarding the contents of the source code.

Except for open source software licensed under GPL/LGPL and so on, distributing, copying, disassembling, reverse

compiling and reverse engineering of the software provided with this product are all expressly prohibited. In addition,

exporting any software provided with this product violating export laws is prohibited.

Specifications* *For further information, refer to the Basic Information.

Power source *1: PoE (IEEE802.3af compliant)

Power consumption *1:PoE DC 48 V : 150 mA/ Approx. 7.2 W (Class 0 device)

U1542

PoE DC 48 V : 140 mA/ Approx. 6.7 W (Class 0 device)

U1532

Operating environment

Ambient operating temperature:

Ambient operating humidity:

–30 °C to +50 °C {–22 °F to +122 °F}

(Power On range: –20 °C to +50 °C {–4 °F to +122 °F})

10 % to 100 % (no condensation)

Storage environment

Storage temperature:

Storage humidity:

–30 °C to +60 °C {–22 °F to +140 °F}

10 % to 95 % (no condensation)

Waterproof *

2:IP66 (IEC 60529), Type 4X (UL50E)

NEMA 4X compliant

Shock resistance: IK10 (IEC 62262)

Wind resistance: Up to 40 m/s {approx. 89 mph}

Dimensions: 112.5 mm (W) × 112.5 mm (H) × 262 mm (D)

{4-7/16 inches (W) × 4-7/16 inches (H) × 10-5/16 inches (D)}

Mass: Approx. 860 {1.90 lbs}g

Finish:

Main body

: Aluminum die cast/ PC resin, i-PRO white

Outer fixing screws

: Stainless steel (Corrosion-resistant treatment)

Front panel

: Polycarbonate

resin, Clear

*1 Refer to our support website <Control No.: C0106> for further information about Power source and

Power consumption information.

*2 Only when installation work is properly performed according to the Installation Guide and appropriate

waterproof treatment is performed.

• Before attempting to connect or operate this product, please read these instructions

carefully and save this manual for future use.

• microSDXC/ microSDHC/ microSD memory card is described as microSD memory card.

• The external appearance and other parts shown in this manual may differ from the actual product within the

scope that will not interfere with normal use due to improvement of the product.

Caution:

• The network camera is only intended for a connec-

tion to an ethernet or PoE network without routing to

the outside plant.

• This product has no power switch. Be sure to install

disconnect devices such as a circuit breaker to shut

down the main power of power supplying equipment

to this product.

• Before attempting to connect or operate this product,

please read these instructions carefully.

Notice:

• This product is not suitable for use in locations where

children are likely to be present.

• Do not install this product in locations where ordinary

persons can easily reach.

• This product is a professional equipment.

• For information about screws and other parts

required for installation, refer to the corresponding

section of this document.

Precautions

i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out

of improper installation or operation inconsistent with this

documentation.

<i-PRO white brackets> <Light gray brackets>

Adapter box: WV-QJB500-W*2 WV-QJB500-G*2 WV-QJB500-S*2

Pole mount bracket: WV-QPL500-W

*2 – WV-Q188

Corner mount bracket: WV-QCN500-W*2 – WV-Q189

*1 Refer to our support website <Control No.: C0501> for further information about optional accessories.

*2 Scheduled to be released soon. Refer to our support website <Control No.: C0501> for further information.

* La longueur de la vis est un exemple lors de l’installation de la caméra au plafond ou sur

un mur robuste d’une épaisseur de 20 mm {25/32 pouces} ou plus.

For U.S. and Canada:

i-PRO Americas Inc.

https://www.i-pro.com/

For Europe and other countries:

i-PRO Co., Ltd. Fukuoka, Japan

https://www.i-pro.com/

i-PRO EMEA B.V. UK Branch

1010 Cambourne Business Park,

Cambridgeshire CB23 6DP

Authorised Representative in EU:

i-PRO EMEA B.V.

Laarderhoogtweg 25, 1101 EB

Amsterdam, Netherlands

IMPORTANT:

⿟Do not adjust the Horizontal (PAN) angle more

than ±180°. This may cause cables to be

wrenched.

【7】 Mount the front cover to the camera

After removal, be sure not to touch the clear part of the front

panel.

Minimum pull-out strength: 724 N {163 lbf} (per 1 pc.).

Note:

⿟When gangbox/ junction box or the like are used, it is recommended that 2 pieces be used side by side.

(Cable connection will become easy by fixing the camera on one side and wiring on the other side.)

Mount the gangbox/ junction box on the installation surface.

Step1 Processing the installation surface (Process in accordance with the installation method)

Directly mount

Gangbox/ Junction box

Parts and functions Step3 Mount the camera (Fix in accordance with the installation method)

Directly mount

Gangbox/ Junction box

Step4 Adjustment

Recommended tightening torque:

PAN lock screw : 2.15 N·m {1.59 lbf·ft}

TILT lock screw : 2.15 N·m {1.59 lbf·ft}

YAW lock screw : 2.15 N·m {1.59 lbf·ft}

Adapter box

Recommended tightening torque: 1.37 N·m {1.01 lbf ft}

YAW lock screw

TILT lock screw

PAN lock screw

Azimuth (YAW) angle

-190°to+100°

Camera arm unit

Vertical (TILT) angle



0°to100°

Horizontal (PAN) angle

±180°

Common

Note:

⿟When running the cable using the side cable access hole of the camera, the cable access hole

indicated in the upper figure is not required.

⿟To install this product outdoors, be sure to waterproof screw holes and cable access hole.

⇦ Direction in which the camera is pointed

Protection film

Minimum pull-out strength: 724 N {163 lbf} (per 1 pc.).

■Indicators

Note:

⿟Lighting/blinking LED can be turned off with the software settings at any time. (The initial state is lighting or

blinking.) Refer to the Operating instructions, and set the LED to be solid off if necessary.

LINK indicator

When the camera is able to communicate with the connected device Lights orange

ACT indicator

When data is being sent via the network camera Blinks green (accessing)

■Buttons

•INITIAL SET button (Initializing)

Follow the steps below to initialize the network camera. Retry if the camera does not start up normally.

*

Do not turn off the power of the camera during the process of initialization. Otherwise, it may fail to initialize and

may cause malfunction.

•TELE button

Click the TELE button to adjust the zoom ratio to the “Tele” side.

•WIDE button

Click the WIDE button to adjust the zoom ratio to the “Wide” side.

Turn on the power of the

camera while pressing

the INITIAL SET button*

⇨

Turn off the

power of

the camera

Make sure

to release

the button

15 seconds

The camera will start up and the

settings including the network

settings will be initialized

around

2 minutes

⇨ ⇨

Camera mount bracket

Sunshade

Front cover

Front panel YAW lock

screw

Camera

arm unit

TILT lock

screw

PAN lock

screw

WV-QJB500-W

(option)

Name plate(bottom side)

Hexagon screws (4 pcs.)

(provided with WV-QJB500-W)

IR LED

Side cable access hole

⿟Determine the mounting height of the camera so that the lowest part of the camera or the camera mount

bracket after the installation is 2 m 80 cm {110 inches} or higher from the floor.

Drill a hole in the installation surface. (4 screw holes / 1 cable access hole).

INITIAL SET

button

ACT indicator

LINK indicator microSD slot

TELE button WIDE button

Symbol of the microSD

【1】 Install on the installation surface

by following the operating

instructions of WV-QJB500-W

(option).

【2】 Hang the camera by hooking the

installed auxiliary wire on the hook

on the rear of the camera mount

bracket as shown in the illustration

on the right.

Cable access hole

ø30 mm {ø1-3/16 inches}

46 mm

{1-13/16 inches}

40 mm

83.5 mm

{3-9/32 inches}

{1-21/32 inches}

83.5 mm {3-9/32 inches}

40 mm {1-21/32 inches}

46 mm {1-13/16 inches}

⇧

The “up” direction

of the camera

Cable access hole

ø30 mm {ø1-3/16 inches}

Step2 Making connections

Wire and caulk

Tighten until no gap

is present.

Align “ ▶” with “◁” and then

rotate until “▶” aligns with “ ⇦”.

Insert the RJ45 plug.

RJ45 Network cable

Ethernet cable

(category 5e or better,

straight, 4 pairs (8 pins)

RJ45 waterproof jack

Less than 100 m {328 feet}

External dimension:

ø5 mm {ø3/16 inches} -

ø6.5 mm {ø1/4 inches}

RJ45

plug

(locally

procured)

RJ45

waterproof

connector

cover

(accessory)

RJ45

waterproof

connector

cap

(accessory)

IMPORTANT:

⿟Devices to which power can be supplied to this product are PoE hub and PoE power supplying equipment.

⿟Turn off each system’s power supply before making a connection.

IMPORTANT:

⿟Do not install the camera where the RJ45 waterproof

connector is exposed to constant rain or moisture.

⿟When removing the RJ45 waterproof connector, be

sure to remove it with the reverse procedure of

connection.

⿟When the Ethernet cable is disconnected once,

reconnect the cable after around 2 seconds. When

the cable is quickly reconnected, the power may

not be supplied from the PoE device.

Note:

⿟Back end of the microSD memory card does not protrude

over the surface of the microSD slot (the same surface as

the symbol of the microSD).

■ Insert a microSD memory card

Back end of

the microSD

memory card

microSD memory card

Symbol of the microSD microSD slot

■ Remove a microSD memory card

When removing a microSD memory card, reverse the procedure.

①

Remove the front cover from the camera.

②

Remove the microSD memory card by pushing it down until a click sound is heard while holding the card

withangertopreventitfrompoppingout.

③ Attach the front cover to the camera again.

Note:

⿟When using a microSD memory card, format it using this product. Refer to the Operating Instructions

for how to format a microSD memory card.

⿟Use the compatible microSD memory cards. Refer to our support website <Control No.: C0107> for

latest information about the compatible microSD memory cards.

IMPORTANT:

⿟When removing a microSD memory card, make sure to set "SD memory card" to "Not use" on the

[SD memory card] tab of the setup menu before removing the microSD memory card. After removing

the memory card, set back the "SD memory card" to "Use". For information about the setup menu,

refer to the Operating Instructions.

Insert / remove a microSD memory card

①

Remove the front cover from the camera.

②

Insert the microSD memory card into the end of the microSD slot

andconrmthataclickingsoundismade.

③ Attach the front cover to the camera again.

Secure the camera with fixing screws (4 pcs.) (M4:locally procured).

Using a 3 mm {1/8 inches} hex wrench (locally procured),

secure

the camera with hexagon screws (4 pcs.) (M4:accessory of

WV-QJB500-W).

Fixing screw (4 pcs.)

(M4: locally procured) Hexagon screw (4 pcs.)

(M4: accessory of WV-QJB500-W)

WV-QJB500-W

(option)

Fixing screw (4 pcs.)

(M4: locally procured)

Gangbox/

Junction box

【2】 Connect to the network by following information described on our support

website <Control No.: C0123>.

【1】 Turn on the camera.

【3】 Adjust the camera direction.

①Using a 5 mm {3/16 inches} hex wrench (locally procured), loosen TILT lock screw, PAN lock screw and YAW

lock screw.

②Adjust the horizontal (PAN) angle, vertical (TILT) angle, and azimuth (YAW) angle while watching the screen of

the PC on the network.

③After adjusting the direction, fix the camera by tighten-

ing the TILT lock screw, PAN lock screw and YAW lock

screw.

【6】 Adjust the zoom ratio of the

camera.



Adjust the zoom ratio using the TELE button and the

WIDE button while watching the screen.

Note:

⿟ After approx. 3 seconds from releasing the TELE button or the WIDE button, the auto focus function

will automatically be executed. Do not touch the camera during execution of the auto focus function.

⿟ Attaching the front cover may cause slight defocusing. In this case, execute the auto focus function from the

setup menu after attaching the front cover and removing the protection film.

⿟ When the resolution is set to higher than 640×360, image quality may deteriorate depending on the

zoom ratio. Refer to our support website <Control No.: C0124> for further information.

⇨

【4】

Remove the front cover from the camera.

②Pull the front cover forward.

approx.25°

Front cover

①Rotate the front cover while

pressing the spring plate

with a thin tool.

【8】

After complete installation, remove the

protection lm from the front panel.

【5】 If necessary, insert a microSD

memory card by referring to

“Insert / remove a microSD

memory card”.

WIDE buttonTELE button

Front cover

WV-QJB500-W

(option)

Camera mount bracket

Installed auxiliary wire

Hook

Screw for temporary fixing

⿟Use only when attaching using

WV-QJB500-W.

When not using WV-QJB500-W, remove the screw for temporary

fixing.

83.5 mm

{3-9/32 inches}

46 mm {1-13/16 inches}

⇨

approx.25°

⇨

②Rotate the front cover.① Insert the front cover.

⇨

Align “OPEN ” with “ ”.▷ ◁

Spring plate

➡

Black tape (both side)

•Do not remove these black tapes.

Drain slit

Product specificaties

Merk:	I-PRO
Categorie:	Bewakingscamera
Model:	WV-U1532LA

Heb je hulp nodig?

Als je hulp nodig hebt met I-PRO WV-U1532LA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Bewakingscamera I-PRO

I-PRO WV-U31301-F2L Handleiding

16 December 2024

I-PRO WV-S32402-F2L1 Handleiding

16 December 2024

I-PRO WV-X15600-V2LN Handleiding

16 December 2024

I-PRO WV-X25580-F2LN2 Handleiding

16 December 2024

I-PRO WV-X25500-V3LN Handleiding

16 December 2024

I-PRO WV-X15300-V3LN Handleiding

16 December 2024

I-PRO WV-U2540LA Handleiding

16 December 2024

I-PRO WV-U2530LA Handleiding

16 December 2024

I-PRO WV-U21300-V2L Handleiding

16 December 2024

I-PRO WV-U1542LA Handleiding

16 December 2024

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Honeywell HC35WE5R3 Handleiding

20 December 2024

Honeywell Performance H4W8PER2V Handleiding

20 December 2024

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024

TP Link VIGI C450 Handleiding

18 December 2024

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024

Hikvision DS-2CE17U0T-LF Handleiding

18 December 2024