I-PRO WV-S2536LA Handleiding

I-PRO Bewakingscamera WV-S2536LA

Lees hieronder de 📖 handleiding in het Nederlandse voor I-PRO WV-S2536LA (26 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/26

WV-S2536LTN

Installation Guide

Included Installation Instructions

Network Camera

For professional use only

Outdoor use

Model No. WV-S2536LTN

WV-S2536LT

WV-S2536LN

WV-S2536L

About the user manuals

Product documentation is composed of the following documents.

• Provides information about “Precautions”, Installation Guide (this document):

“Precautions for installation” and the installation method.

• Provides information Basic Information (in the following manual website):

about “Precautions for use”, “Parts and functions” and “Detail specifications”.

• Explains how to Operating Instructions (in the following manual website):

perform the settings and how to operate this camera.

https://i-pro.com/products_and_solutions/en/surveillance/documentation-database

"<Control No.: C****>" used in these documents should be used to search for

information on our technical information website

(

https://i-pro.com/products_and_solutions/en/surveillance/learning-and-support/

knowledge-base/technical-information

) and will guide you to the right information.

• Before attempting to connect or operate this product, please read these instructions

carefully and save Important Safety Instructions leaflet for future use.

• microSDXC/ microSDHC/ microSD memory card is described as microSD memory card.

• The external appearance and other parts shown in this manual may differ from the actual product within the

scope that will not interfere with normal use due to improvement of the product.

C0224-1064

PGQP3736YA

Authorised Representative in EU:

i-PRO EMEA B.V.

Laarderhoogtweg 25, 1101 EB

Amsterdam, Netherlands

i-PRO EMEA B.V. UK Branch

1010 Cambourne Business Park,

Cambridgeshire CB23 6DP

Tokyo, Japan

https://www.i-pro.com/

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used

electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take

them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment.

For more information about collection and recycling, please contact your local authority.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national

legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it complies with

the requirement set by the Directive for the chemical involved.

NOTE: This equipment has been tested and

found to comply with the limits for a Class A digi-

tal device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when the

equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed

and used in accordance with the instruction man-

ual, may cause harmful interference to radio com-

munications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case

the user will be required to correct the interfer-

ence at his own expense.

FCC CAUTION: Changes or modifications not

expressly approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

Supplier’s Declaration of conformity

Trade name : i-PRO

Model No. : WV-S2536LTN, WV-S2536LT

WV-S2536LN, WV-S2536L

Responsible Party :

i-PRO Americas Inc.

8550 Fallbrook Drive, Suite 200 Houston,

Texas 77064

Support Contact: 1-800-513-5417

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

The model number and serial number of this

product may be found on the surface of the

unit.

You should note the model number and serial

number of this unit in the space provided and

retain this book as a permanent record of your

purchase to aid identification in the event of

theft.

Model No.

Serial No.

For U.S.A.

This device complies with part 15 of the FCC

Rules.

Operation is subject to the following two condi-

tions : (1) This device may not cause harmful

interference, and (2) this device must accept

any interference received, including interference

that may cause undesired operation.

Méthode d’installation Vis de fixation recommandée

La capacité de traction

minimale requise

Installer la caméra vidéo sur le boîtier de groupe/

boîte de jonction à l’aide de la plaque de fixation. M4 x 16 mm {5/8 pouces} /

4 él.*　196 N {44 lbf}

Installer directement la caméra vidéo sur la surface

d’installation en utilisant la plaque de fixation.

Installer la caméra vidéo à l’aide de la platine de

fixation d’installation exclusivement conçue.

Se référer au manuel d’utilisation de chaque platine

de fixation.

* La longueur de la vis est un exemple lors de l’installation de la caméra au plafond ou sur un mur

robuste d’une épaisseur de 20 mm {25/32 pouces} ou plus.

For U.S.A.

Caution: Notice:

•

The DC power supply connected to the camera

must be in the same building.

•

The network camera is only intended for a

connection to an ethernet or PoE network without

routing to the outside plant.

•

This product has no power switch. Be sure

to install disconnect devices such as a circuit

breaker to shut down the main power of power

supplying equipment to this product.

•

Only connect 12 V DC Class 2 power supply

(UL 1310/CSA 223), limited power source (IEC/

EN/UL/CSA 60950-1, IEC/EN/UL/CSA 62368-1

Annex Q) or IEC/EN/UL/CSA 62368-1 PS2.

•

Before attempting to connect or operate this

product, please read these instructions carefully.

•

This product is not suitable for use in locations

where children are likely to be present.

•

Do not install this product in locations where

ordinary persons can easily reach.

•

This product is a professional equipment.

•

For information about screws and other parts

required for installation, refer to the corresponding

section of this document.

: Direct current symbol

Precautions

 Do not insert any foreign objects.

Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside

the unit.

Turn the power off immediately and contact qualified service personnel for service.

 Do not use this product in an inflammable atmosphere.

Failure to observe this may cause an explosion resulting in injury.

 Avoid installing this product in the locations where salt damage occurs or

corrosive gas is produced.

Otherwise, the mounting portions will deteriorate and injury or accidents due to a fall of the product may

occur.

 Do not strike or give a strong shock to this product.

Failure to observe this may cause injury or fire.

 Keep microSD memory cards away from infants and children.

Otherwise, they may swallow the cards by mistake.

In this case, consult a doctor immediately.

 Do not hang down from this product or use this product as a pedestal.

Failure to observe this may cause injury or accidents.

 Do not damage the power cable.

Do not damage, fabricate, twist, stretch, bundle, or forcibly bend the power cable.

Do not place heavy objects on it, and keep it away from heat sources.

Use of a damaged power cable may cause electric shock, short circuit, or fire.

Consult the dealer for repair.

 Do not install this product on a place that is greatly influenced by wind.

Installation on a place where the wind speed is 60 m/s {approx. 134 mph} or more may cause a fall of the

product resulting in injury or accidents.

 Do not sprinkle more water, exceeding the performance limit of waterproof with a

high pressure cleaning machine, etc.

Fire or electrical shock may be caused by immersion.

 Do not attempt to disassemble or modify this product.

Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections.

Product specificaties

Merk:	I-PRO
Categorie:	Bewakingscamera
Model:	WV-S2536LA
Kleur van het product:	Wit
Gewicht:	1100 g
Breedte:	154 mm
Diepte:	105 mm
Internationale veiligheidscode (IP):	IP66
Bluetooth:	Nee
Ondersteund audioformaat:	AAC-LC, G.711, G.726
Vormfactor:	Dome
Automatisch scherpstellen:	Ja
Ondersteuning voor plaatsing:	Buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Montagewijze:	Plafond
Maximum resolutie:	2048 x 1536 Pixels
Totaal aantal megapixels:	2 MP
Videocompressieformaten:	H.264, H.265
Type stroombron:	DC
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash), MicroSDHC, MicroSDXC, SD, SDHC, SDXC
Nachtvisie:	Ja
Video bewegings-detectie:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Brandpuntbereik:	2.9 - 9 mm
Omvang optische sensor:	1/2.8 "
Type beeldsensor:	CMOS
Optische zoom:	3.1 x
Witbalans:	ATW, AWC
Veiligheidsfunties:	Dust resistant, Water resistant
IK code:	IK10
Normal focusing bereik:	0.3 m
Draaihoek:	270 °
Nachtkijker afstand:	70 m
Detectieafstand (groothoek):	25.4 m
Detectieafstand (tele):	83.4 m
Observatieafstand (groothoek):	10.2 m
Observatieafstand (tele):	47.3 m
Herkenningsafstand (groothoek):	5.1 m
Herkenningsafstand (tele):	23.6 m
Identificatieafstand (groothoek):	2.5 m
Identificatieafstand (tele):	11.8 m
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-40 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 100 procent
Systeemfuncties intelligente videobewaking (IVS):	Face detection, Human detection
Dynamisch bereik:	144 dB