Husqvarna Z 254 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Husqvarna Z 254 (76 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/76
Operator Manual / Manual del operador
Zero Turn Mower / Z 254
967045201-00
Please read the operator manual carefully and make sure
you understand the instructions before using the machine.
Gasoline containing up to 10% ethanol (E10) is acceptable for use
in this machine. The use of gasoline with more than
10% ethanol (E10) will void the product warranty.
Lea el manual de instrucciones detenidamente y asegúrese
de comprender las instrucciones antes de utilizar la máquina.
La gasolina que contiene hasta 10 % de etanol (E10) se puede
usar en esta máquina. El uso de gasolina que tenga más
de 10 % de etanol (E10) anulará la garantía del producto.
En / SP
©2015 All rights reserved.
Orangeburg, SC Printed in U.S.A.
When this product is worn out and no longer
used, return it to the reseller or other party for
recycling.
To implement improvements, specications
and designs can be altered without prior
notication.
Note that no legal demands can be placed
based on the information contained in these
instructions.
Use only original parts for repairs. The use of
other parts voids the warranty.
Do not modify or install non-standard
equipment to the unit without consent from the
manufacturer. Modications to the unit may
cause unsafe operations or damage the unit.
WARNING! Failure to follow cautious
operating practices can result in dangerous
injury to the operator or other persons. The
owner must understand these instructions,
and must let only approved persons who
understand these instructions to operate the
mower.
Each person operating the mower must be of
sound mind and body and must not be under
the inuence of mind altering substances.
WARNING! Engine exhaust, some of its
constituents, and certain vehicle components
contain or emit chemicals known to the State of
California to cause cancer and birth defects or
other reproductive harm.
WARNING! Battery posts, terminals
and related accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and birth defects
or other reproductive harm. Clean your hands
after handling.
CONFORMITY CERTIFICATES
USA requirements
Labels are placed on the engine and/or in the engine compartment stating that the machine
will fulll the requirements. This is also applicable to special requirements for any of the states,
(California emission rules etc.). Do not remove these labels. Certicates can also be supplied
with the machine at delivery or written in the Engine manual. Take care of them as they are
valuable documents.
WARNING! Engine exhaust and certain
vehicle components contain or emit chemicals
considered to cause cancer, birth defects,
or other reproductive system damage. The
engine exhaust contains carbon monoxide,
which is an odorless, colorless, poisonous gas.
Do not use the machine in enclosed spaces.
CONTENTS
INTRODUCTION 4 .......................................................
Driving and Transport on Public Roads 4 ...............
Towing 4 ..................................................................
Operating 4 .............................................................
SYMBOLS AND DECALS ..........................................6
SAFETY 7 .....................................................................
Protecting Children 7 ..............................................
Personal Safety Equipment 8 .................................
Slope Operation 8 ...................................................
Safe Handling of Gasoline 9 ...................................
Transport 10 ............................................................
Towing ................................................................ 11
Spark Arrestor .................................................... 11
CONTROLS 12 .............................................................
Steering Control Levers 13 .....................................
Park Brake 13 .........................................................
Ignition Switch 13 ....................................................
Throttle Control 14 ..................................................
Choke control 14 .....................................................
Service Meter 14 .....................................................
Blade Switch 14 ......................................................
Fuse 15 ...................................................................
Seat Adjustment Lever .......................................15
Fuel Shut Off Valve 15 ............................................
Cutting Height Lever 15 ..........................................
Bypass Linkages 15 ................................................
Fuel Tank............................................................16
Tracking 16 .............................................................
OPERATION 17 ............................................................
Training 17 ..............................................................
Operating on Hills 19 ..............................................
Moving Machine By Hand 20 ..................................
MAINTENANCE 21 .......................................................
Battery 23 ................................................................
Safety System 24 ....................................................
Park Brake 24 .........................................................
Tire Pressures 24 ....................................................
Caster Wheels 25 ...................................................
Anti-scalp Rollers 25 ...............................................
V-belts 25 ................................................................
Adjusting the Mower Deck 26 .................................
Cutting Blades 27 ....................................................
Cleaning 27 .............................................................
LUBRICATION 28 .........................................................
Transmission 28 ......................................................
Wheel and Deck Zerks 28 .......................................
Engine Oil 29 ..........................................................
TROUBLESHOOTING 30 .............................................
STORAGE................................................................31
SCHEMATIC 32 ............................................................
TECHNICAL DATA ................................................... 33
SERVICE JOURNAL ................................................ 35
INTRODUCCIÓN 40 .....................................................
Conducción y transporte en vías públicas 40 .........
Remolque 40 ...........................................................
Funcionamiento 40 .................................................
SÍMBOLOS 42 Y RÓTULOS .........................................
SEGURIDAD 43 ............................................................
Seguridad infantil 43 ...............................................
Equipo de seguridad personal 44 ...........................
Funcionamiento en pendientes 44 ..........................
Manipulación segura de la gasolina 45 ...................
Transporte 47 ..........................................................
Remolque 47 ...........................................................
Parachispas 47 .......................................................
CONTROLES 48 ...........................................................
Palancas de control de la dirección 49 ...................
Freno de estacionamiento 49 .................................
Interruptor de encendido 50 ....................................
Interruptor de cuchilla 50 ........................................
Medidor de servicio 50 ............................................
Control del acelerador 50 ........................................
Estrangulador 50 .....................................................
Fusible 51 ...............................................................
Palanca de ajuste del asiento 51 ............................
Válvula de corte de combustible 51 ........................
Palanca de altura de corte 51 .................................
Varillajes de derivación 51 ......................................
Depósito de combustible 52 ....................................
Desplazamiento 52 .................................................
OPERACIÓN 53 ...........................................................
Capacitación 53 ......................................................
Trabajo en pendientes 56 .......................................
Mover la máquina manualmente 57 ........................
MANTENIMIENTO 58 ...................................................
Batería 60 ...............................................................
Sistema de seguridad 61 ........................................
Freno de estacionamiento 61 .................................
Presión de los neumáticos 62 .................................
Ruedecillas 62 ........................................................
Ruedas de apoyo 62 ...............................................
Correas en V 63 ......................................................
Ajuste del equipo de corte 63 .................................
Discos de corte 64 ..................................................
Limpieza 65 .............................................................
LUBRICACIÓN 66 ........................................................
Transmisión 66 ........................................................
Engrasadores de rueda y equipo 66 .......................
Cambio de aceite del motor 67 ...............................
SOLUCIÓN DE PROBLEMAS 68 .................................
ALMACENAMIENTO 69 ...............................................
ESQUEMA ............................................................... 70
DATOS TÉCNICOS ................................................. 71
REGISTRO DE SERVICIO 73 ......................................


Product specificaties

Merk: Husqvarna
Categorie: Grasmaaier
Model: Z 254

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna Z 254 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grasmaaier Husqvarna

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

IKRA

IKRA ELM 1434 U Handleiding

18 November 2024
Anova

Anova MC200 Handleiding

17 November 2024
Anova

Anova CC251T Handleiding

17 November 2024
Anova

Anova MC507 Handleiding

17 November 2024
Hurricane

Hurricane HBS 75 Handleiding

16 November 2024
Kubota

Kubota F2880 Handleiding

15 November 2024
Kubota

Kubota F3680 Handleiding

15 November 2024