Husqvarna 327HE4X-series Handleiding
Husqvarna
Heggenscharen
327HE4X-series
Lees hieronder de š handleiding in het Nederlandse voor Husqvarna 327HE4X-series (28 pagina's) in de categorie Heggenscharen. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/28
EEEEnnnngggglllliiiisssshhhh
327HD
A65
X-series
327HE3
X-series
327HE4
X-series
Operatorā²s manual
Please r
ead the operatorās manual carefully and make sure you understand the instructions before using the machine.
KEY
T
O SYMBOLS
2
ā
English
Symbols
W
ARNING! Incorrect or careless
use of a hedge trimmer can turn it
into a dangerous tool that can
cause serious or even fatal injury. It
is extremely important that you
read and understand the contents
of this operatorās manual.
Please read the operatorās manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
ā¢ Approved hearing protection
ā¢ Approved eye protection
This product is in accordance with
applicable EC directives.
Cutting tool. Do not touch the tool
without ļ¬rst switching oļ the
engine.
This machine is not electrically
insulated. If the machine
touches or comes close to high-
voltage power lines it could lead
to death or serious bodily injury.
Electricity can jump from one
point to another by arcing. The
higher the voltage, the greater
the distance electricity can
jump. Electricity can also travel
through branches and other
objects, especially if they are
wet. Always keep a distance of at least 10 m between the
machine and high-voltage power lines and/or any objects
that are touching them. If have to work within this safe
distance you should always contact the relevant power
company to make sure the power is switched oļ before
you start work.
This machine can be dangerous! The operator of the
machine must ensure, while working, that no persons or
animals come closer than 15 metres.
Arrows which show limits for handle
positioning.
Keep all parts of your body away from
hot surfaces.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots or shoes.
Noise emission to the environment
according to the European
Communityās Directive. The
machineās emission is speciļ¬ed in
chapter Technical data and on label.
Other symbols/decals on the
machine refer to special
certiļ¬cation requirements for
certain markets.
The engine is s
witched oļ by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
CONTENTS
English
ā
3
Contents Note the following before
starting:
Please read the oper
atorās manual carefully.
KEY
TO SYMBOLS
Symbols
................................................................ 2
CONTENTS
Contents
............................................................... 3
Note the following before starting: ........................ 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what?
....................................................... 5
GENERAL SAFETY PRECA
UTIONS
Impor
tant .............................................................. 6
Personal protective equipment ............................. 6
Machineā²
s safety equipment ................................. 7
ASSEMBL
Y
Fitting the hand guard and loop handle
................ 10
Fitting the handle .................................................. 10
Fitting the cutting head ......................................... 10
Adjusting the harness ........................................... 10
Fitting the impact guard ........................................ 11
FUEL HANDLING
Fuel saf
ety ............................................................ 12
Fuel ...................................................................... 12
Fuelling ................................................................. 13
ST
ARTING AND STOPPING
Chec
k before starting ........................................... 14
Starting and stopping ........................................... 14
W
ORKING TECHNIQUES
Gener
al working instructions ................................ 16
Transport position ................................................. 18
MAINTENANCE
Carb
urettor ........................................................... 19
Mufļ¬er .................................................................. 19
Cooling system ..................................................... 20
Spark plug ............................................................ 20
Air ļ¬lter ................................................................. 21
Gear ..................................................................... 21
Cleaning and lubrication ....................................... 22
Maintenance schedule ......................................... 23
TECHNICAL D
ATA
T
echnical data ...................................................... 24
EC-declaration of conformity ................................ 25
!
W
ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W
ARNING! Under no circumstances may
the design of the machine be modiļ¬ed
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modiļ¬cations and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
W
ARNING! Incorrect or careless use of a
hedge trimmer can turn it into a
dangerous tool that can cause serious or
even fatal injury. It is extremely important
that you read and understand the
contents of this operatorās manual.
Product specificaties
| Merk: | Husqvarna |
| Categorie: | Heggenscharen |
| Model: | 327HE4X-series |
Heb je hulp nodig?
Als je hulp nodig hebt met Husqvarna 327HE4X-series stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Heggenscharen Husqvarna
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Heggenscharen
- Heggenscharen Bosch
- Heggenscharen Dolmar
- Heggenscharen Ferm
- Heggenscharen Florabest
- Heggenscharen Flymo
- Heggenscharen Gude
- Heggenscharen Hikoki
- Heggenscharen Hitachi
- Heggenscharen Makita
- Heggenscharen Metabo
- Heggenscharen Ryobi
- Heggenscharen Solo
- Heggenscharen Tanaka
- Heggenscharen Texas
- Heggenscharen Troy-Bilt
- Heggenscharen Vonroc
- Heggenscharen Worx
- Heggenscharen Ozito
- Heggenscharen Black And Decker
- Heggenscharen Cocraft
- Heggenscharen Meec Tools
- Heggenscharen Challenge
- Heggenscharen Cramer
- Heggenscharen MacAllister
- Heggenscharen Maruyama
- Heggenscharen Spear & Jackson
- Heggenscharen Powerworks
Nieuwste handleidingen voor Heggenscharen
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022