Hunter 27209 Handleiding

Hunter Afstandsbediening 27209

Lees hieronder de 📖 handleiding in het Nederlandse voor Hunter 27209 (11 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Universal Fan and

Light Remote Control

Universal Fan and

Light Remote Control

Universal Fan and

Light Remote Control

Form# 44092-01

20101215

English

Owner’s Guide and

Installation Manual

Hand-Held Remote and Wall Cradle

44092-01 • 12/15/10 • Hunter Fan Company

1 • Welcome

Table of Contents

1 • Welcome ..............................................................2

2 • Installation Preparation ...............................3

3 • Receiver Installation ......................................4

4 • Transmitter Installation ...............................7

5 • Programming the Remote .........................8

6 • Operation ............................................................8

7 • Troubleshooting ........................................... 10

8 • Warranty ........................................................... 11

Read and Save these Instructions

Caution: Risk of Electrical Shock!

All wiring must be performed in accordance with national

and local electrical codes. If you are unfamiliar with the

wiring codes, you should use a qualied electrician.

To avoid overheating and possible damage to other

equipment, do not install to control a receptacle, motor

operated appliance, or transformer-supplied appliance.

Use only to control one ceiling fan with or without a light

xture.

Ratings: 120 VAC, 60 Hz,1.0 Amp Fan Receiver Weight: 6 oz.

300 Watts incandescent light

44092-01 • 12/15/10 • Hunter Fan Company

2 • Installation Preparation

Notes:

1. This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

2. This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from the one the

receiver is connected to.

• Consult the dealer or an experienced radio/TV technician for help.

3. For use only with electrically reversible ceiling fans rated at 1.0 amp or less,

and fan incandescent light kits rated at 300 watts or less.

4. Not for use with shaded-pole motors, Hunter 42” Low Prole fans, and

Hunter Baseball fans. Not recommended for use with the Hunter Original®.

For Hunter Original® series fans, use Hunter control model numbers 27187,

22691, or 27189.

5. Medium and Low fan speeds are determined by the control and thus may

vary from the factory settings due to normal motor variations.

6. For use with Hunter Hanging Systems (excludes Hunter Original) on at

ceilings or angled ceilings with a pitch up to 34°.

7. Not for use in applications where the fan does not have a wall switch.

Any changes or modications to this equipment not expressly

approved by Hunter Fan Company will void the user’s authority

to operate the equipment.

BEFORE YOU INSTALL THIS CONTROL:

USE THE PULL CHAIN SWITCH TO SET THE FAN SPEED

TO THE HIGH POSITION BEFORE INSTALLATION. DO

NOT USE THE PULL CHAIN TO CHANGE THE FAN SPEED

AFTER INSTALLATION, AS DAMAGE TO YOUR FAN OR

REMOTE MAY RESULT. THE SPEED OF THE FAN SHOULD

ONLY BE CHANGED BY THE HUNTER CONTROL!!

Product specificaties

Merk:	Hunter
Categorie:	Afstandsbediening
Model:	27209
Kleur van het product:	Platina
Ingebouwd display:	Nee
Gewicht:	- g
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Plug and play:	Ja
Maximumbereik:	- m
Oplaadbaar:	Nee
Input type:	Drukknopen
juiste gebruik afstandsbediening:	Speciaal
Batterijtechnologie:	Alkaline
Type batterij:	A23
Number of devices supported:	3