Hudson Valley Humphrey 4817-AGB Handleiding

Hudson Valley Verlichting Humphrey 4817-AGB

Lees hieronder de đź“– handleiding in het Nederlandse voor Hudson Valley Humphrey 4817-AGB (1 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
4817
Hudson Valley Lighting, Inc.
P.O. Box 7459
106 Pierces Road
Newburgh, NY 12550
(800) 814-3993
www.hudsonvalleylighting.com
GENERAL
1. To ensure the success of the fixture installation, the following instructions and
diagram(s) should be read and understood.
2. All electrical connections must be made in accordance with the National Electric
code and local codes and ordinances. If you are uncertain of the methods of
installing electrical wiring and lighting fixtures secure the services of a qualified
licensed electrician.
3. TOOLS NEEDED: Blade screwdriver, phillips screwdriver, slip joint pliers or
small adjustable wrench, wire cutter/stripper, electrical current tester, stepladder
and electrical tape. NOTE: The important safeguards and instructions outlined on
this sheet are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution and care are factors that
cannot be built into any product. Caution and care must be supplied by the
person(s) installing, operating and maintaining this lighting fixture.
INSTALLATION PREPARATION
1. TURN OFF THE ENTIRE ELECTRICAL CIRCUIT TO WHICH THE LIGHTING
FIXTURE IS TO BE ATTACHED. Move the appropriate circuit breaker to the “off
position or completely remove the fuse controlling the circuit.
2. If an existing fixture is being replaced, remove it and note to which of the wires
in the outlet box the fixture was attached. DO NOT SEPARATE ANY OTHER
WIRES THAT MAY BE IN THE BOX. DO NOT DAMAGE THE INSULATION OF
OLDER WIRING. In regular circumstances the BLACK wire will be the “Hot” lead
and the WHITE wire will be the “Neutral” or “Common” lead. A GREEN or BARE
COPPER wire is the “Ground”. In older buildings it is always good practice to
reconfirm the polarity of the wiring.
3. This fixture is designed to be mounted on a standard round or octagon box. The
box must be securely mounted to the structure of the building.
FIXTURE INSTALLATION
1.Remove the fixture and parts bag(s) from the carton. Before discarding the carton,
double check packing to make certain that all parts are found.
2.Attach the crossbar to the outlet box. (The green screw should face the floor).
3. Fasten the bare copper fixture wire to the green or bare copper wire in the box
or bare copper wire in the box to the crossbar with green screw provided.
NEVER FASTEN THE GROUND WIRE TO THE BLACK OR “HOT” WIRE!
FAILURE TO FOLLOW THIS INSTRUCTION COULD RESULT IN SERIOUS
INJURY OR DEATH!
4. Fasten the white fixture wire to the white wire in the outlet box. Fasten the wires to
together with an approved fastener(wire nut). Starting about 1” below the fastener,
tightly wrap connection with the electrical tape so that the tape seals the end of the
fastener. Make sure that there is no exposed wire or strands that could cause a
dangerous short circuit!
5. Connect the black fixture wires to the black wire in the outlet box. Fasten the
joined wires as in step 4.
6. Place the canopy over the outlet box and fasten it by ball nut.
7. Install the lamp(s) (light bulb(s). NOTE: The fixture is rated for 60 watt type A lamp.
DO NOT EXCEED RECOMMENDED WATTAGE!
8.Install the shade to the fixture.
9. Install the glass to the fixture by finial.
10. Restore power to circuit at breaker or fuse box.


Product specificaties

Merk: Hudson Valley
Categorie: Verlichting
Model: Humphrey 4817-AGB

Heb je hulp nodig?

Als je hulp nodig hebt met Hudson Valley Humphrey 4817-AGB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Hudson Valley

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

EMOS

EMOS D5AB01 Handleiding

2 December 2024
EMOS

EMOS D3EW04 Handleiding

2 December 2024
EMOS

EMOS DCLW09 Handleiding

2 December 2024
EMOS

EMOS D4AA04 Handleiding

2 December 2024
EMOS

EMOS D4FW01 Handleiding

2 December 2024
EMOS

EMOS D5AP01 Handleiding

2 December 2024
EMOS

EMOS D5AW01 Handleiding

2 December 2024
EMOS

EMOS D4AM10 Handleiding

2 December 2024
EMOS

EMOS D4BC02 Handleiding

2 December 2024
EMOS

EMOS D5ZM01 Handleiding

2 December 2024