HuddleCamHD HCM-2 Handleiding

HuddleCamHD Video conferentie systeem HCM-2

Lees hieronder de 📖 handleiding in het Nederlandse voor HuddleCamHD HCM-2 (2 pagina's) in de categorie Video conferentie systeem. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Step 2
For masonry or drywall wall:
Place included anchors (Fig 1, #1) in wall and
mount to anchors using included #10 sheet
metal screws. (Fig 1, #2)
For double gang electrical box:
Mount to box using #6 machine screws and
washers. (Fig 1, #3)
What s Included’
QTY —Large Wall Mount BK/WH1
QTY — x 1" Conical Plastic Anchor 1/4" Drill Size (Fig 1, #1)4 10-12
QTY — x 1 1/4" PPH Sheet Metal Screw with Flat Washer (Fig 1, #2)4 #10-16
QTY — x 1" PPH Machine Screw (Fig 1, #3)4 #6-32
QTY — PPH and QTY — Machine Screw Flat Washer (Fig 1, #4)4 1/4”-20x 3/8” 2 1/4”
Fig 1
Rev 2.2
8/212020
HCM 2-
Large Base Camera
Wall Mount
Setup Guide
Mounng Instrucons
Step 1
For masonry or drywall wall:
Posion Large wall mount (Fig 2) on wall and
mark wall for anchor placement (Fig 2, # 1). Pre-
drill 1/4" holes, minimum deep. 1”
For double gang electrical box:
Posion over box with slots overlaying device
mounng holes (Fig 2, #1) on box.
#2
#1
#3
#4
For more informaon on HuddleCamHD
mounts and other products please visit:
hps://huddlecamhd.com Rev 2.2
8/21/2020
HuddleCamHD
HC12X HUDDLEVIEW-
HC20X SIMPLETRACK2-
Generaon 1 USB 3.0 HuddleCamHD cameras
Step 4
Mount Camera to mount (Fig 2, #3) with
included 1/4 20 machine screw. (Fig 1, # -
4)
Ulize (0,1,2) machine screw at 1/4”
washers as required. (Fig 1, #4) Note: 1/4”
machine screw at washers are to be
used depending upon depth of thread in-
sert in base of camera, in order to achieve
a snug t. Pass all cables through opening
in mount (Fig 2, #2) and connect.
Mounng Instrucons Connued...
Mount Compability
Step 3
Drill hole in wall through rear exit opening for
cable access, or use base exit opening. (Fig 2, #2)
Other Cameras…
This mount has been
designed for use with most
large based cameras ulizing
a 1/4 20” -mounng hole as
can be found on SONY,
Panasonic, Cisco, Polycom
and Vaddio cameras.

Product specificaties

Merk: HuddleCamHD
Categorie: Video conferentie systeem
Model: HCM-2

Heb je hulp nodig?

Als je hulp nodig hebt met HuddleCamHD HCM-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Video conferentie systeem HuddleCamHD

HuddleCamHD

HuddleCamHD MiniTrack 4K Pro Handleiding

15 Juli 2024
HuddleCamHD

HuddleCamHD 20X-G2 Handleiding

18 Mei 2024
HuddleCamHD

HuddleCamHD 3X Handleiding

18 Mei 2024
HuddleCamHD

HuddleCamHD 30X-G2 Handleiding

18 Mei 2024
HuddleCamHD

HuddleCamHD 10XA Handleiding

18 Mei 2024
HuddleCamHD

HuddleCamHD HuddlePair Handleiding

18 Mei 2024
HuddleCamHD

HuddleCamHD HC-EPTZ Handleiding

18 Mei 2024
HuddleCamHD

HuddleCamHD HCM-2 Handleiding

18 Mei 2024
HuddleCamHD

HuddleCamHD 3XA with Audio Handleiding

18 Mei 2024
HuddleCamHD

HuddleCamHD 10X-USB2 Handleiding

17 Mei 2024

Handleiding Video conferentie systeem

Nieuwste handleidingen voor Video conferentie systeem

MuxLab

MuxLab MuxMeet Videobar 500820 Handleiding

20 Februari 2025
Philips

Philips PSE0520 Handleiding

7 Februari 2025
Crestron

Crestron CCS-UCA-SMK Handleiding

20 December 2024
Crestron

Crestron TSW-770/1070-MUMK Handleiding

20 December 2024
Crestron

Crestron UC-CAM-WMK Handleiding

20 December 2024
AVer

AVer VB370A Handleiding

20 December 2024
AVer

AVer COMFON540 Handleiding

11 December 2024
AVer

AVer COMVBEMIC Handleiding

11 December 2024
ClearOne

ClearOne Unite 20 Pro Handleiding

10 December 2024
Huddly

Huddly USB Adapter Handleiding

7 December 2024