HQ BAT-LEAD-C10 Handleiding

HQ Niet gecategoriseerd BAT-LEAD-C10

Lees hieronder de 📖 handleiding in het Nederlandse voor HQ BAT-LEAD-C10 (40 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 143 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

BAT-LEAD-C10HQ

AUTOMATIC CHARGER

FOR 2V / 6V / 12V

LEAD ACID BATTERIES

READ INSTRUCTION BEFORE USE!

English Deutsch Français

Nederlands

Italiano Español Magyar Suomi Svenska Česky

MANUAL

MODE D’EMPLOI

MANUALE

HASZNÁLATI ÚTMUTATÓ

BRUKSANVISNING

ANLEITUNG

GEBRUIKSAANWIJZING

MANUAL DE USO

KÄYTTÖOHJE

NÁVOD K POUŽITÍ

Česky Svenska Suomi

Magyar

Español Italiano

Nederlands

Français Deutsch English

DESCRIPTION

This charger charges all 2 / 6 / 12V DC sealed lead acid batteries

between 2.2Ah and 10Ah automatically. When connected battery is

fully charged, charging current is reduced to prevent overcharging.

Automatic voltage and current control ensures that the connected

battery stays completely charged and overcharging as well as gas

development is prevented. Provided with short circuit and wrong

polarity protection

OPERATING INFORMATION

In contrast to simple chargers the charging current of this automatic

charger is not constant and depends on some components, for

example the actual charging level of the battery, the age, type and

capacity of the battery. Also it is important how much the battery has

been discharged before.

If the battery has been discharged with high currency, then charging

will also start with high current (max. 0,6mA). This means that with

rising of the battery voltage, the charging current decreases.

Towards the end of the charging process normally the green light

diminishes, indicating that the battery is fully charged. With old

batteries sometimes there might be a small current ﬂ owing (leakage

current of the battery). Here the green light might stay on, depending

on the strength of this leakage current.

This charger can charge batteries of capacities between 2.2Ah and

10Ah. The bigger the capacity, the longer the charging time will be.

For charging it is not important if the battery is partly or completely

discharged. The battery can stay connected for the charger for a long

period.

In case of connecting the battery with wrong polarity, the red LED will

burn and charging current will be cut off.

USING THE CHARGER IN 4 STEPS

1. Choose right charging voltage (2V, 6V or 12V DC). Wrong voltage

can destroy the charger and/or battery!

2. Connect red pin of the charger to (+) terminal of the battery and the

black pin to the (-) terminal of the battery.

3. connect the chager to a 230V AC mains outlet socket.

4. After charging, remove charger from mains outlet socket, then

remove battery connection.

CAUTION!

• This product is short-term short circuit protected! Short circuits last

ing longer than 1 minute must be prevented under all circumstances,

otherwise parts of the charger might be overloaded and damage

the charger!

• This charger is for charging the described sealed lead acid batteries

only! Attempts to charge other type batteries might result in personal

injuries and damage to the charger

• If the supply chord is damaged it must be replaced by the

manufacturer or it’s service agent to avoid hazard

• Pay attention to the right polarity!

• Never deeply discharge the battery during charging

• During charging the battery must be placed in a well ventilated

area

• Always check the charging instructions on the battery

• This charger is not intended for use by young children or inﬁ rm

persons without supervision. Young children should be supervised

to ensure that they not play with the appliance

• Open cells of lead acid batteries before charging

• Check the acid of the battery for longer charging

• Check acid of the battery in between charging and make sure not

to have open ﬁ re, open light and glimmers close to the charged

batteries. (danger of explosion due to gas)

English Deutsch Français

Nederlands

Italiano Español Magyar Suomi Svenska Česky

Product specificaties

Merk:	HQ
Categorie:	Niet gecategoriseerd
Model:	BAT-LEAD-C10
Kleur van het product:	Zwart
Gewicht verpakking:	740 g
Soort:	Batterijlader voor binnengebruik
Inclusief AC-adapter:	Ja
Afmetingen verpakking (BxDxH):	100 x 160 x 70 mm
Ondersteund aantal accu's/batterijen:	1
Ingangsspanning:	230 V
Frequentie:	50 Hz
Spanning:	12 V
Compatibele batterij technologiën:	Sealed Lead Acid (VRLA)
Batterijen inbegrepen:	Nee