HP ProLiant BL460c G10 Handleiding

HP Server ProLiant BL460c G10

Lees hieronder de 📖 handleiding in het Nederlandse voor HP ProLiant BL460c G10 (78 pagina's) in de categorie Server. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/78
HPE ProLiant BL460c Gen10 Server Blade
User Guide
Part Number: 876833-001
Published: July 2017
Edition: 1
Abstract
This document is for the person who installs, administers, and troubleshoots server blades.
Hewlett Packard Enterprise assumes you are qualified in the servicing of computer equipment and
trained in recognizing hazards in products with hazardous energy levels.
© Copyright 2014, 2017 Hewlett Packard Enterprise Development LP
Notices
© Copyright Hewlett Packard Enterprise Development LP
The information contained herein is subject to change without notice. The only warranties for Hewlett Packard
Enterprise products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett
Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
microSD is a trademark or a registered trademark of SD-3C in the United States, other countries or both.
Red Hat®
is a registered trademark of Red Hat, Inc. in the United States and other countries.
VMware®
is a registered trademark or a trademark of VMware, Inc. in the United States and/or other
jurisdictions.
Contents
Component identification........................................................................... 7
Front panel components......................................................................................................................7
Front panel LEDs and buttons.............................................................................................................8
Front panel LED power fault codes.......................................................................................... 9
Serial label pull tab information.................................................................................................9
Drive numbering................................................................................................................................ 10
Hot-plug drive LED definitions...........................................................................................................10
NVMe SSD components....................................................................................................................11
System board components................................................................................................................12
System maintenance switch................................................................................................... 13
Mezzanine connector definitions............................................................................................ 14
DIMM slot locations................................................................................................................ 14
SUV cable connectors.......................................................................................................................14
Setup...........................................................................................................16
Overview............................................................................................................................................16
Installing an HPE BladeSystem c-Class enclosure........................................................................... 16
Preparing the enclosure..........................................................................................................16
Preparing the Server Blade for installation............................................................................. 16
Installing server blade options...........................................................................................................17
Installing interconnect modules......................................................................................................... 17
Interconnect bay numbering and device mapping..................................................................17
Connecting to the network.................................................................................................................19
Install the server blade...................................................................................................................... 19
Completing the configuration.............................................................................................................21
Operations..................................................................................................22
Power up the Server Blade................................................................................................................22
Power down the Server Blade ..........................................................................................................22
Remove the Server Blade................................................................................................................. 23
Install the server blade...................................................................................................................... 23
Remove the access panel................................................................................................................. 25
Install the access panel..................................................................................................................... 25
Remove the DIMM baffles.................................................................................................................26
Install the DIMM baffles.....................................................................................................................27
Remove the direct connect SATA cable............................................................................................ 28
Install the direct connect SATA cable................................................................................................ 29
Remove the mezzanine assembly.....................................................................................................30
Remove the FlexibleLOM..................................................................................................................30
Install the FlexibleLOM......................................................................................................................31
Remove the storage controller/NVMe pass-through board............................................................... 32
Storage controller/NVMe pass-through board options...................................................................... 32
Remove a drive................................................................................................................................. 33
Installing a hot-plug drive...................................................................................................................34
Remove the front panel/drive cage assembly................................................................................... 34
Install the front panel/drive cage assembly....................................................................................... 35
Contents 3


Product specificaties

Merk: HP
Categorie: Server
Model: ProLiant BL460c G10

Heb je hulp nodig?

Als je hulp nodig hebt met HP ProLiant BL460c G10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Server HP

Handleiding Server

Nieuwste handleidingen voor Server