HP LaserJet Pro MFP M274 Handleiding

HP Niet gecategoriseerd LaserJet Pro MFP M274

Lees hieronder de 📖 handleiding in het Nederlandse voor HP LaserJet Pro MFP M274 (40 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 188 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

Español. 13 ..........

Italiano 10 ...........

Deutsch 7 .............

Français 4 ............

English 1 ..............

Suomi 25 .............

Nederlands 22 ......

Dansk 19 .............

Català 16 .............

Svenska 34 ..........

Português 31 .......

Norsk 28 ..............

Windows

1. For Windows 7 or lower, do not connect the USB cable befor installing the

software. The installation process prompts to connect the cable at the

appropriate time. If the cable is already connected, restart the printer

when installation prompts to connect the cable.

2. Continue with “6. Locate or download the software installation les.”

NOTE: During software installation, select the option to Directly connect

this computer using a USB cable.

Mac

1. For Mac, connect the USB cable between the computer and the printer

before installing the software.

2. Continue with “6. Locate or download the software installation les.”

Manually congure the IP address

For information on how to manually congure the IP address, see the printer

User Guide www.hp.com/support/colorljM274MFP.

Wired (Ethernet) network connection

Use a standard network cable.

1. Connect the network cable to the printer and to the network. Wait a few

minutes for the printer to acquire a network address.

2. On the printer control panel, touch the Network button. If an IP address

is listed, the network connection has been established. If not, wait a few

more minutes and try again. Note the IP address for use during software

installation. Example IP address: 192.168.0.1

To manually congure the IP address, see “Manually congure the

IPaddress.”

3. Continue with “6. Locate or download the software installation les.”

NOTE: During software installation, select the option to Connect through

a network.

IMPORTANT:

Follow Steps 1 - 3 on

the printer hardware setup

poster, then continue

with Step 4 to the right.

www.hp.com/support/colorljM274MFP www.register.hp.com

Color LaserJet Pro

MFP M274

Getting Started Guide

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable.

After turning on the printer, wait for it to initialize. To navigate the touchscreen control panel,

use touch, swipe, and scroll gestures. Follow the prompts on the control panel to congure

these settings:

• Language

• Location

• Default Settings

Under Default Settings select one of these options:

• Self-managed: Optimized default settings for a guided experience on setups,

congurations, and updates.

• IT-managed: Optimized default settings for eet manageability with enhanced security.

Settings are fully customizable after initial setup.

NOTE: Select Print Information Page to print a page that instructs how to change the default

settings.

NOTE: Touch the Help button on the printer control panel to access help topics.

Initial setup on the control panel

Select a connection method and prepare for software installation

Windows full solution

1. Insert the printer CD into the computer, or launch the software

installation le downloaded from the Web.

2. The software installer detects the language of the operating system, and

then it displays the main menu of the installation program in the same

language. When installing from the CD, if the installer program does not

start after 30 seconds, browse the CD drive on the computer and launch

the le named SETUP.EXE.

3. The Software Selection screen details the software to be installed.

• The recommended software installation includes the print driver

and software for all available printer features.

• To customize the software installed, click the Customizable software

selections link. When nished, click the Next button.

4. Follow the on-screen instructions to install the software.

5. When prompted to select a connection type, select the appropriate option

for the type of connection:

• Directly connect this computer using a USB cable

• Connect through a network

NOTE: When connecting through a network, the easiest way to detect the

printer is to select Automatically nd my printer on the network.

6. (Optional) For printers on a network, at the end of the software

installation process, set up fax and scan features by using the

Fax Setup Wizard Scan to Email Wizard Scan to Network , , and the

Folder Wizard. This is a convenient way to congure these features.

See “10. Set up scan features for printers on a network” for more

information.

OS X full solution

1. Launch the software installer that you downloaded from the Web.

2. The software installer detects the language of the operating system, and

then it displays the main menu of the installation program in the same

language.

3. The Installation Options screen details the software to be installed.

• For a standard installation, click the Install button now.

• For a custom installation, click the Customize button. On the screen

that opens, select the components to install, and then click the Install

button.

4. Follow the on-screen instructions to install the software.

5. At the end of the software installation process, use the HP Utility Setup

Assistant to congure printer options.

OS X basic installation

To install basic print and fax drivers without running the HP full solution

software from CD or download, follow these steps: hp.com

1. Connect the printer to the computer or network.

2. From System Preferences Printers and Scanners, click , then the plus

button on the bottom left, and select using the driver named either M274

AirPrint or HP Printer.

Method 1: Download from HP Easy Start

1. Go to 123.hp.com/laserjet, and click Download.

2. Follow the onscreen instructions and prompts to save the le to the computer.

3. Launch the software le from the folder where the le was saved, and continue

with “7. Install the software.”

Method 2: Download from printer support Web site

1. Go to www.hp.com/support/colorljM274MFP.

2. Select Software and drivers.

3. Download the software for your printer model and operating system.

4. Launch the installation le by clicking on the .exe or .zip le as necessary.

Method 3: Install from the printer CD

For Windows, the software installation les are provided on the CD that came with the

printer.

For OS X, the installer le on the CD includes a link to download the les from the Web.

1. Insert the printer CD into the computer.

2. Continue with “7. Install the software.”

6. Locate or download the software installation les

8. Mobile and wireless printing (optional)

7. Install the software

Connect the device to the wireless network

To print from a phone or tablet, connect the device to the same network as the printer.

Apple iOS devices (AirPrint):

Open the item to print, and select the Action icon. Select , select the printer, and Print

then select Print.

Newer Android devices (4.4 or newer):

Open the item to print, and select the button. Select , select the printer, and Menu Print

select Print.

Some devices require downloading the HP Print Service plugin app from the Google

Play store.

Older Android Devices (4.3 or older):

Download the HP ePrint app from the Google Play store.

Windows Phone:

Download the HP AiO Remote app from the Windows Store.

For more information on wireless printing and wireless setup, go to

www.hp.com/go/wirelessprinting.

NOTE: Printing from a wireless device requires a wireless network connection.

Learn More About Mobile Printing

To learn more about other mobile printing options,

including additional ePrint solutions, scan the QR code,

or see the “Mobile printing” section of the User Guide.

See the User Guide for information on setting up the scan-to features or go to www.hp.com/support/colorljM274MFP.

Wired (Ethernet) network connection

• Verify that the printer is attached to the correct network port using a cable of

the correct length.

• Verify the lights next to the network port are lit.

• Verify the print driver is installed on the computer.

• Test the network connection by pinging the network:

Windows

Click Start > Run. Type , and press . Type cmd Enter ping,

type a space, type the printer IP address, and then press Enter.

Example IP address: 192.168.0.1

OS X

Open the Network Utility, and type the IP address in the pane. Press ping

Enter. Example IP address: 192.168.0.1

• If the window displays round-trip times, the network is working.

• If the ping does not work, try restarting the printer and recheck all of the

connection steps.

Troubleshooting

User Guide

The User Guide includes printer usage and troubleshooting information. It is

available on the printer CD and on the Web:

User Guide on the Web

1. Go to www.hp.com/support/colorljM274MFP.

2. Click Manuals.

User Guide from the printer CD

For Windows, the User Guide is copied to the computer during the recommended

software installation.

Windows® XP, Windows Vista®, and Windows® 7

Click , select Start Programs All Programs or , select , select the folder HP

for the HP printer, and then select Help.

Windows® 8

On the screen, right-click an empty area on the screen, click Start All Apps

on the app bar, click the icon with the printer’s name, and then select .Help

Check for rmware updates

1. From the Home screen on the printer control panel, touch the Setup

button.

2. Scroll to and open the menu.Service

3. Select LaserJet Update.

4. Select Check for Updates Now.

Control panel help

Touch the Help button on the printer control panel to access help topics.

Additional support resources

For HP’s all-inclusive help for the printer, go to

www.hp.com/support/colorljM274MFP:

• Solve problems

• Find advanced conguration instructions

• Download software updates

• Join support forums

• Find warranty and regulatory information

• Mobile printing resources

Use HP ePrint via email to print documents by sending them as an email attachment to the printer’s email address from any email-enabled device, even from devices that are not

on the same network.

9. Настройване на HP ePrint чрез имейл (по избор)

To use HP ePrint via email, the printer must meet these requirements:

• The printer must be connected to a wired or wireless network an have Internet

access.

• HP Web Services must be enabled on the printer, and the printer must be

registered with HP Connected.

Enable HP Web Services

1. Open the HP Embedded Web Server (EWS):

a. From the home screen on the product control panel, touch the Connection

Information button, and then touch the Network button to display the IP

address or host name.