Hotpoint HCW607HT Handleiding

Hotpoint Magnetron HCW607HT

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint HCW607HT (14 pagina's) in de categorie Magnetron. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
EN
Owner's Manual
THANK YOU FOR BUYING A HOTPOINT PRODUCT
In order to receive a more complete assistance, please
register your product on www . register10 . eu PLEASE SCAN THE QR CODE ON
YOUR APPLIANCE IN ORDER TO
REACH MORE INFORMATION
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
1. Control panel
2. Cavity Fan (not visible) and
Circular heating element (not
visible)
3. Ladder racks
(the level is indicated on the front
of the oven)
4. Door
5. Upper heating element/grill
6. Lamp
7. Meat probe insert point
(if present)
8. Identification plate
(do not remove)
9. Lower heating element
(not visible)
CONTROL PANEL DESCRIPTION
1 2 3 4 5 76 8 9
1. ON / OFF
For switching the oven on and
off and for stopping an active
function.
2. MENU / FUNCTIONS DIRECT
ACCESS
For quick access to the functions
and menu.
3. NAVIGATION BUTTON MINUS
For scrolling through a menu and
decreasing the settings or values
of a function.
4. BACK
For returning to the previous
screen.
During cooking, allows settings to
be changed.
5. DISPLAY
6. CONFIRM
For confirming a selected function
or a set value.
7. NAVIGATION BUTTON PLUS
For scrolling through a menu and
increasing the settings or values of
a function.
8. OPTIONS / FUNCTIONS DIRECT
ACCESS
For quick access to the functions,
settings and favorites.
9. START
For starting a function using the
specified or basic settings.
1
2
3
4
5
6
7
8
9
ACCESSORIES
Before purchasing other accessories that are available
on the market, make sure that they are heat-resistant
and suitable for steaming.
Make sure that there is a gap of at least 30 mm
between the top of any container and the walls of the
cooking compartment in order to allow steam to ow
suciently.
Accessories during microwave function may raise in
temperature. It is recommended to use protection to
handle accessories at the end of the cycle.
WIRE SHELF BAKING TRAY CRISP PLATE HANDLE FOR CRISP
PLATE
The wire shelf is suitable
for all cooking modes, also
in Microwave cooking.
When using microwaves
place the wire shelf always
on level 1 (the lower one).
You can place food directly
on the wire shelf or use it
to support baking trays
and tins or other oven-
ware resistant to heat and
microwaves.
The baking tray is suitable
for all cooking modes
except for Microwave
functions. Can be used
to cook all kind of foods
without container. Use it
to collects the cooking
juices, placing it below
the wire shelf.
Only for use with the
designated functions.
The Crisp plate must always
be placed in the center of
the wire shelf and can be
pre-heated when empty,
using the special function
for this purpose only. Place
the food directly on the
Crisp plate. Place the silicone
feet between the bars of the
wire shelf for added stability.
Useful for removing the
hot Crisp plate from the
oven.
STEAMER*
(ONLY IN SOME MODELS)
3
2
1
To steam foods such as fish or vegetables, place these in the basket (2) and pour
drinking water (100 ml) into the bottom of the steamer (3) to achieve the right
amount of steam. To boil foods such as potatoes, pasta, rice or cereals, place these
directly on the bottom of the steamer (the basket is not required) and add an
appropriate amount of drinking water for the amount you are cooking.
For best results, cover the steamer with the lid (1) provided.
Always place the steamer on the wire shelf at level 1 and only use it with the
appropriate cooking functions, or with microwave function.
The number of accessories may vary depending on which model is purchased.
*Other accessories can be purchased separately from the After-sales Service.
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf onto the level you require by
holding it tilted slightly upwards and resting the
raised rear side (pointing upwards) down first.
Then slide it horizontally along the runners as far as
possible.
Other accessories, like the baking tray, are to be
inserted horizontally, letting them slide on the
runners.
Push the accessories all the way in, making sure, that
it does not touch the appliance door.
FUNCTIONS
CONVENTIONAL
For perfectly cooking and browning both on the
top and bottom any kind of dish on one shelf only. To
achieve best results this function have the preheating
phase: wait the end of preheat to insert the food.
Required accessories: baking tray or wire shelf and heatproof
container.
FOOD TEMP. (°C) DURATION (min)
Cupcake / Smallcake 160 20 - 25
Cookies 165 15 - 20
FORCED AIR
For cooking sweets and meats with hot air
circulation. To achieve best results this function
have the preheating phase: wait the end of preheat
to insert the food. Is possible to use it for cooking
different foods that require the same cooking
temperature on several shelves at the same time. This
function can be used to cook different foods without
odours being transferred from one food to another.
Required accessories: baking tray or wire shelf and heatproof
container.
REMOVING AND REFITTING THE LADDER RACKS
There are two ladder racks on both sides of the oven
cavity, anchored on two button-shaped supports. The
ladder racks are removable to make cleaning more
convenient.
1. To remove the ladder racks, firmly grip the external
part of the guide, and pull it upwards to extract it
from the frontal support while rotating on the rear
support, then slide out the whole part from the
cavity.
2. To reposition the ladder racks, slide the back part
onto the rear support. Then, once anchored, push
the assy down until the ladder rack is inserted into
the frontal support.
FIRST TIME USE
1. SELECT THE LANGUAGE
You will need to set the language and the time
when you switch on the appliance for the first time:
“Englishwill show on the display.
English
Press or to scroll through the list of available
languages and select the one you require.
Press to confirm your selection.
Please note: The language can subsequently be changed
by selecting “LANGUAGE” in “SETTINGS” menu, available by
pressing .
2. SET THE TIME
After selecting the language, you will need to set the
current time: The two digits for the hour will flash on
the display.
CLOCK
Press or to set the current hour and press :
The two digits for the minutes will flash on the
display. Press or to set the minutes and press
to confirm.
Please note: You may need to set the time again following
lengthy power outages. Select “CLOCK in “SETTINGS” menu,
available by pressing .
3. SET POWER CONSUMPTION
The oven is programmed to consume a level of
electrical power that is compatible with a domestic
network that has a rating of more than 3 kW (16 A): If
your household uses a lower power, you will need to
decrease this value (13 A). Select POWER in SETTINGS
menu avialable by pressing and select desired
power setting.
1.Low
2.High
4. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal. Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it. Heat the oven to 200 °C for around one hour, using
theFast Preheat” function. Odors and smoke are
normal when the oven is used the first few times, or
when it is heavily soiled. Follow the instructions for
setting the function correctly.
Please note: It is advisable to air the room after using the
appliance for the rst time.


Product specificaties

Merk: Hotpoint
Categorie: Magnetron
Model: HCW607HT

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint HCW607HT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Magnetron Hotpoint

Handleiding Magnetron

Nieuwste handleidingen voor Magnetron