Hotpoint-Ariston RPD 1165 DX EU Handleiding

Hotpoint-Ariston Wasmachine RPD 1165 DX EU

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint-Ariston RPD 1165 DX EU (72 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/72

Contents

Installation, 2-3

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Care and maintenance, 4

Cutting off the water or electricity supply

Cleaning the washing machine

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Precautions and tips, 5

General safety

Disposal

Opening the porthole door manually

Description of the washing machine, 6-7

Control panel

Display

Running a wash cycle, 8

Wash cycles and functions, 9

Table of wash cycles

Wash functions

Detergents and laundry, 10

Detergent dispenser drawer

Preparing the laundry

Special wash cycles

Load balancing system

Troubleshooting, 11

Service, 12

RPD 1165 D

Instructions for use

WASHING MACHINE

English,1

GB ES

Español,13 ΕΛΛΗΝΙΚΑ,25

Türkçe,37

TR BG

Áúëãàðñêè,49

Русский,61

Installation

! This instruction manual should be kept in a

safe place for future reference. If the washing

machine is sold, transferred or moved, make

sure that the instruction manual remains with

the machine so that the new owner is able to

familiarise himself/herself with its operation

and features.

! Read these instructions carefully: they con-

tain vital information relating to the safe instal-

lation and operation of the appliance.

Unpacking and levelling

Unpacking

1. Remove the washing machine from its

packaging.

2. Make sure that the washing machine has

not been damaged during the transportation

process. If it has been damaged, contact the

retailer and do not proceed any further with

the installation process.

3. Remove the 4 pro-

tective screws (used

during transportation)

and the rubber wa-

sher with the cor-

responding spacer,

located on the rear

part of the appliance

( ).see figure

4. Close off the holes using the plastic plugs

provided.

5. Keep all the parts in a safe place: you will

need them again if the washing machine ne-

eds to be moved to another location.

! Packaging materials should not be used as

toys for children.

Levelling

1. Install the washing

machine on a flat

sturdy floor, without

resting it up against

walls, furniture cabi-

nets or anything else.

2. If the floor is not

perfectly level, com-

pensate for any une-

venness by tightening or loosening the adju-

stable front feet ( ); the angle of incli-see figure

nation, measured in relation to the worktop,

must not exceed 2°.

Levelling the machine correctly will provide

it with stability, help to avoid vibrations and

excessive noise and prevent it from shifting

while it is operating. If it is placed on carpet or

a rug, adjust the feet in such a way as to allow

a sufficient ventilation space underneath the

washing machine.

Connecting the electricity and

water supplies

Connecting the water inlet hose

1. Connect the inlet

hose by screwing it to

a cold water tap using

a 3/4 gas threaded

connection (see figu-

re).

Before performing the

connection, allow the

water to run freely until

it is perfectly clear.

2. Connect the inlet

hose to the washing

machine by screwing

it onto the correspon-

ding water inlet of the

appliance, which is

situated on the top

right-hand side of the

rear part of the ap-

pliance . (see figure)

3. Make sure that the hose is not folded over

or bent.

! The water pressure at the tap must fall within

the range of values indicated in the Technical

data table (see next page).

! If the inlet hose is not long enough, contact a

specialised shop or an authorised technician.

! Never use second-hand hoses.

! Use the ones supplied with the machine.

Connecting the drain hose

Connect the drain

hose, without bending

it, to a drain duct or

a wall drain situated

between 65 and 100

cm from the floor;

alternatively, placed

it over the edge of a

basin, sink or tub, fa-

stening the duct sup-

plied to the tap (see

figure). The free end

of the hose should

not be underwater.

! We advise against the use of hose extensions;

if it is absolutely necessary, the extension must

have the same diameter as the original hose

and must not exceed 150 cm in length.

Electrical connections

Before plugging the appliance into the electri-

city socket, make sure that:

• thesocketisearthedandcomplieswithall

applicable laws;

• thesocketisabletowithstandthemaxi-

mum power load of the appliance as indicated

in the Technical data table (see opposite);

• thepowersupplyvoltagefallswithintheva-

lues indicated in the Technical data table (see

opposite);

• thesocketiscompatiblewiththeplugofthe

washing machine. If this is not the case, repla-

ce the socket or the plug.

! The washing machine must not be installed

outdoors, even in covered areas. It is extreme-

ly dangerous to leave the appliance exposed

to rain, storms and other weather conditions.

! When the washing machine has been instal-

led, the electricity socket must remain within

easy reach.

65 - 100 cm

! Do not use extension cords or multiple so-

ckets.

! The cable should not be bent or compressed.

! The power supply cable must only be repla-

ced by authorised technicians.

Warning! The company shall not be held re-

sponsible in the event that these standards are

not observed.

The first wash cycle

Once the appliance has been installed, and

before you use it for the first time, run a wash

cycle with detergent and no laundry, using

wash cycle auto clean (see “Cleaning the wa-

shing machine”).

Technical data

Model RPD 1165 D

Dimensions

width 59.5 cm

height 85 cm

depth 60,5 cm

Capacity from 1 to 11 kg

Electrical

connections

please refer to the technical

data plate fixed to the ma-

chine

Water con-

nections

maximum pressure

1 MPa (10 bar)

minimum pressure

0.05 MPa (0.5 bar)

drum capacity 71 litres

Spin speed up to 1600 rotations per

minute

Test wash

cycles in

accordance

with re-

gulations

1061/2010

1015/2010

programme 9

;

Eco Cotton 60°C.

programme 9

;

Eco Cotton 40°C.

This appliance conforms to

the following EC Directives:

- 2004/108/EC (Electroma-

gnetic Compatibility)

- 2006/95/EC (Low Voltage)

- 2012/19/EU (WEEE)

Product specificaties

Merk:	Hotpoint-Ariston
Categorie:	Wasmachine
Model:	RPD 1165 DX EU

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint-Ariston RPD 1165 DX EU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachine Hotpoint-Ariston

Hotpoint-Ariston ac 128 l Handleiding

1 April 2023

Hotpoint-Ariston aq 8 l 49 u Handleiding

1 April 2023

Hotpoint-Ariston AQ102F 49H EU AQUALTIS Handleiding

1 April 2023

Hotpoint-Ariston al 109 sl Handleiding

1 April 2023

Hotpoint-Ariston aq9d69uv Handleiding

1 April 2023

Hotpoint-Ariston WMG 722B EU Handleiding

18 Juni 2023

Hotpoint-Ariston SWD107617C Handleiding

16 Juni 2023

Hotpoint-Ariston aqgl 129 Handleiding

1 April 2023

Hotpoint-Ariston aq9d49uh va Handleiding

1 April 2023

Hotpoint-Ariston ARTL 82 (EU) Handleiding

2 Juni 2023

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Whirlpool BI WMWG 81485 Handleiding

3 December 2024

Whirlpool W6 88 SILENCE IT Handleiding

3 December 2024

Whirlpool W8 09ADS SILENCE IT Handleiding

3 December 2024

Whirlpool TDLR 6251BS PL Handleiding

3 December 2024

Whirlpool WRBSS 6249 S EU Handleiding

3 December 2024

Whirlpool FFB R849 BSV IT Handleiding

3 December 2024

Whirlpool FFB 116 SILVER IT Handleiding

3 December 2024

Whirlpool FFB 848 BSV IT Handleiding

3 December 2024

Whirlpool BI WMWG 91485 EU Handleiding

3 December 2024

Whirlpool W7X 89 SILENCE IT Handleiding

3 December 2024