Hotpoint-Ariston BCB 4010 AA E O3 Handleiding

Hotpoint-Ariston Vriezer BCB 4010 AA E O3

Lees hieronder de đź“– handleiding in het Nederlandse voor Hotpoint-Ariston BCB 4010 AA E O3 (4 pagina's) in de categorie Vriezer. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
EN
Quick guide
THANK YOU FOR BUYING AN HOTPOINT-ARISTON
PRODUCT
In order to receive a more complete assistance, please
register your product on www . hotpoint . eu/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
CONTROL PANEL
3.5.7. 6.
2.
4.
1. 1. Freezer and refrigerator compartment
temperature indicator
2. Fast cool - "Active Oxygen" button
3. On/stand-by
4. Alarm indicator
5. Turning o the sound alarm
6. Black out alarm indicator
7. Temperature button
"ACTIVE OXYGEN" FUNCTION
Through the emission of a small quantity of ozone, this function
enables a reduction in the proliferation of bacteria and microorganisms
inside the refrigertor and limits bad odours. When the function is
activated, a coloured light will appear on the device, according to the
following cyclical features:
• Green light: ozone emission phase
• Blue light: antibacterial and anti-odour action phase (without
ozone emission)
To deactivate the function, simply press the O3 button on the control
panel.
Note: when the Active Oxygen function is activated, a faint odour might
be perceived inside the refrigertor (the same odour that sometimes
accompanies a thunder storm due to the zone produced by the lightning):
it is absolutely normal.
Note: Disabling the function optimizes energy consumption. Keep the
bottle rack grid in the upper parts of the comparison to optimize the
fuction.
FAN*
The Fan improves temperature distribution inside the product,
allowing better preservation of stored food and reduction of excess
humidity. By default, the fan is switched on. You can turn the fan on/
o by pressing for 3 seconds and buttons. The temperature
indicator will ash and a sound signal is activated one times if the
fan is OFF or the temperature indicator will ash and a sound signal
is activated two times if the fan is ON. If the ambient temperature
exceeds 27°C, or if drops of water are present on the glass shelves,
it is essential that the fan is on to ensure the proper preservation of
the food. Deactivation of the fan allows energy consumption to be
optimised.
Note: the fan restarts automatically after a power cut or after turning o
the appliance. Do not obstruct the air intake area with food items.
ON/STANDBY
Press the button for 3 seconds to turn the appliance o. Press
the button again briey to reactivate the appliance.
Note: this does not disconnect the appliance from the power supply.
FREEZER AND REFRIGERATOR
COMPARTMENT TEMPERATURE
It is possible to set a dierent temperature of the appliance by pressing
the "Temp." button.
LEDs lit Set temperature
High Low
Low (colder)
Medium-low
Medium
Medium-high
High (less cold)
FAST COOL
Press the button for 3 seconds before placing a large quantity of
fresh food in the refrigerator compartment. When the function is
turned on the icon light up. The function turns o automatically after
36 hours, or manually by pressing the button again for 3 seconds.
TURNING OFF THE SOUND ALARM
To turn o the sound alarm, briey press the button.
* Available only on certain models
* Available only on certain models
HOW TO STORE FOOD AND BEVERAGE
Legend
TEMPERATE ZONE
Suggested for storage of tropical fruit, cans, drink, eggs,
sauces, pickles, butter, jam
COOL ZONE
Suggested for storage of cheese, milk, daily food,
delicatessen, yoghurt
COOLEST AREA
Suggested for storage of cold cuts, desserts, meat and
sh
FRUIT & VEGETABLE DRAWER
FREEZER DRAWERS
FREEZING ZONE DRAWER
(Max cool zone)
Suggested to freeze fresh/cooked food
HYGIENE GRID*
The Fruit & vegetable drawer is equipped with the Hygiene grid.
Thanks to the special design of this component fruits&vegetable are
not in contact with the natural leakages (as drip loss and moisture
from vegetables) that drop below the Hygiene grid. The Hygiene grid
is treated with Microban SilverShield® technology that reduces the
harmful bacteria by up to 99.9% on the surface of the crisper grid, for
enhanced preservation of fruit and vegetables**.
The hygiene grid can be removed to be washed when dirty, simply
raising it and pulling it out. It can be simply washed by hand, with
water only or with common neutral detergents for dishes. It can be
washed also in the dishwasher. After cleaning, dry before putting it
back into place.
** Independently tested by IMSL (Industrial Microbiological Services Ltd,
UK) using ISO 22196
TROUBLESHOOTING
What to do if... Possible reasons Solutions
The control panel is
switched o, the appliance
does not work.
There may be an appliance power
supply problem.
Check that:
• there is not a power outage;
• the plug is properly inserted in the power socket and the mains
double-pole switch (if present) is in the correct position (i.e. allows
the appliance to be powered);
• the household electrical system protection devices are ecient;
• the power cable is not damaged.
The inside light does not
work.
The light may need to be replaced. • Contact the authorised Technical Assistance Service.
The appliance may be in On / Stand-by
mode. • Turn the appliance on by briey pressing the button (see On/
Stand-by function).
The temperature inside the
compartments is not low
enough.
There could be various causes (see
“Solutions”).
Check that:
• the doors close properly;
• the appliance is not installed near a heat source;
• the set temperature is adequate;
• the circulation of air through the ventilation of the appliance is
ensured.
There is water on the
bottom of the refrigerator
compartment.
The defrost water drain is blocked. Clean the defrosting water drain (see section "Cleaning and
Maintenance").
The front edge of the
appliance, at the door
gasket, is hot.
This is not a defect. It prevents
condensation from forming.
No solution is necessary.
The red
icon is ashing
and a sound signal is
activated
Door open alarm
It is activated when the refrigerator
compartment door remains open for a
prolonged period of time.
To turn the sound signal o, close the open door of the product.
The red
icon is ashing,
a sound signal is activated
and the icon is
activated.
Blackout alarm
It is activated when there is a prolonged
interruption to the power supply which
has caused an increase in temperature
in the freezer compartment.
Note: until the blackout alarm is
deactivated, you cannot set a dierent
temperature for the product.
Turning o the sound signal. Check the condition of the food before
consuming it. After pressing the button, the temperature display will
again show the temperature set. If the freezer compartment has not
yet reached the optimal temperature for the preservation of the food,
the freezer compartment temperature alarm may activate (see freezer
compartment temperature alarm).
The red
icon is lit up
(without ashing), a sound
signal is activated and the
temperature indicators is
ashing.
Freezer compartment temperature
alarm
The freezer compartment temperature
alarm indicates that the compartment
is not at the optimum temperature. This
may occur: when using for the rst time,
after defrosting and/ or cleaning, when
freezing large quantities of food or
when the door to the freezer does not
close completely.
To turn o the sound signal, briey press the “Turn o sound alarm”
button (the temperature indicators will stop ashing). When the
optimum temperature conditions have been reached, the red icon will
automatically turn o. If the freezer compartment temperature alarm
continues, contact the Authorised Technical Assistance Service.
The temperature indicators
for the refrigerator
compartment are ashing
as shown in the gure:
Malfunction alarm
The alarm indicates the malfunction of a
technical component.
Call the authorized Technical Assistance Service.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website docs . hotpoint . eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication plate.
* Available only on certain models


Product specificaties

Merk: Hotpoint-Ariston
Categorie: Vriezer
Model: BCB 4010 AA E O3

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint-Ariston BCB 4010 AA E O3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Vriezer Hotpoint-Ariston

Handleiding Vriezer

Nieuwste handleidingen voor Vriezer