Hotone Mojo Attack Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Hotone Mojo Attack (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
THANK YOU FOR PURCHASING A HOTONE PRODUCT!
Owner's Manual
INPUT
BOOST
CH A/B
REVERB
SEND
FX LOOP
RETURN
SPEAKER
OUTPUT
BALANCED
OUTPUT
CAB SIM
LINE
OUTPUT
POWER AMP
Signal Path
www.hotoneaudio.com
IMPORTANT: TURN ON FIRST, TURN OFF LAST.
Always mute the mixer/audio interface or turn down the volume knob on your amp
before plugging or unplugging power jacks, cables, etc.
When you're using a mixer or an audio interface, please adjust the knobs onboard
carefully to avoid signal clipping.
This unit CANNOT be supplied by phantom power.
Specifications
Built-in Boost: Max. +12 dB pure clean boost
Power Requirement: 18-20V DC center positive
Current Consumption: Min. 4.5A
Speaker Output: 4-16 , self-adaptiveΩ
Max. Output Power (19V):
75 Watts @ 4 / 40 Watts @ 8 / 20 Watts @ 16Ω Ω Ω
Dimensions: 190mm(D) 118.5mm(W) 53.5mm(H)× ×
Weight: 792g (without PSU)
CH A: Hotone Mojo Diamond, inspired by legendary Fender Tweed*
CH B: Hotone Heart Attack, inspired by legendary Mesa Boogie Rectifier*
BASS/MIDDLE/TREBLE: Controls the low, mid and high frequency response
GAIN: Controls the gain amount
VOL. : Controls the output volume
18-20V DC adapter plug (center positive)
Unit on/off switch
Cabinet connector jack (4-16 )Ω
Cab sim on/off switch (works on both LINE OUTPUT and BALANCED OUTPUT jacks)
1/4” (6.35mm) TRS jack (connect to your mixer or audio interface)
BALANCED OUTPUT jack ground wire lift switch (eliminates hum noise)
Balanced XLR output jack (connect to your mixer or audio interface)
0 to +12 dB of clean boost
Boost on/off switch
Boost on/off status light
Amp channel status light (CH A=green, CH B=red)
Amp channel A/B switch
Reverb on/off switch
Reverb on/off status light
Reverb knob
Amp on/off status light
Guitar connection jack
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
18
19
FX Loop jacks:
SEND: Connect to your effects input (or use as a preamp output)
RETURN: Connect to your effects output (or use as a power amp input)
11 12 14 15
16
17
18
19
12
1
*Fen de r Tweed is an a mpli fier mode l of F en de r Musi cal Inst ru ments Corp oratio n.
Mesa B oo gi e Re ct ifier i s an a mpli fie r mode l of M esa/Boog ie Ltd .
The ment io ne d ma nu fa cturer a nd p ro du ct n am es a re trade ma rks or reg iste re d tr ad emarks o f th ei r
resp ec ti ve o wners. T he t rade marks were u se d merely t o id en ti fy the sou nd c ha ract er o f th e prod uc t.
1 2
3
45
67
8
9
10
13


Product specificaties

Merk: Hotone
Categorie: Niet gecategoriseerd
Model: Mojo Attack

Heb je hulp nodig?

Als je hulp nodig hebt met Hotone Mojo Attack stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Hotone

Hotone

Hotone Ravo Handleiding

11 December 2024
Hotone

Hotone Chunk Handleiding

11 December 2024
Hotone

Hotone Liftup Handleiding

11 December 2024
Hotone

Hotone Komp Handleiding

11 December 2024
Hotone

Hotone Whip Handleiding

11 December 2024
Hotone

Hotone Cab Handleiding

11 December 2024
Hotone

Hotone Vow Press Handleiding

11 December 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd