Hooker 5805-90868-96 Handleiding

Hooker Bed 5805-90868-96

Lees hieronder de 📖 handleiding in het Nederlandse voor Hooker 5805-90868-96 (3 pagina's) in de categorie Bed. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
1/3
A SSEMBLY INSTRUCTION
ITEM# 58 - 8 - 5 - 8 - 5/0 Upholstered Headboard 05 90 51 96 & 805 90 51 99
58 - 852- 5 - 852- 5/0 Upholstered Footboard 05 90 96 & 805 90 99
58 - 8 - 5 - 8 - 6/0-6/6 Upholstered Headboard 05 90 67 96 & 805 90 67 99
58 - 8 - 5 - 8 - 6/0-6/6 Upholste Footboard 05 90 68 96 & 805 90 68 99 red
58 - 8 - & 5 - 8 - 5/0-6/6 Rail 05 90 53 96 805 90 53 99
58 -90863- & 5805-90863-99 6/0 Rail 05 96
Caution: Please make sure you have all parts indicated below prior to assembly.
This is heavy and can best be assembled with the help of two or more people. bed
Diagram 2
Diagram 3
Diagram 5
Diagram 1
2/3
Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails.
Assembly steps:
1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the
end bos of side rails (C) to lts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten
nuts (E) securely with spanner wrench (F). (See diagram 1)
Diagram 1
2. Take out center supports (L) from the rail box, attach center supports (L) to slats (D) by using 2
bolts (Q), 2 lock washers (V) and 2 at washers (U). Secure bolts (Q) by using allen wrench (R).
(See diagram 2)
Diagram 2
3. Attach slats (D) to side rails (C) and tighten screws(K) on both ends of slats(D) to side rails(C), .
(See 3)diagram
Diagram 3
3/3
Note: You can change the height of slats by adjusting the height of cleats on side rail as shown in
diagram 4. Remove bolts (I), lock washers (O) and at washers (J) from the cleats by turning
the bolts (I) with allen wrench (M) in anti-clockwise direction. Adjust the cleats to a desired
position, and then secure lock washers, at washers, bolts in clockwise direction by turning
with allen wrench.
Diagram 4
You can adjust the height of center supports (L) as shown in diagram 5 to meet your need by the
following steps.
1. Unscrew bolts on center supports (L) with allen wrench (R).
2. Adjust the height of center supports, align holes on 2pcs of woods and tighten them together with
2 bolts (Q), 2 lock washers (V) and 2 at washer (U) by turning with wrench (R) in clockwise
direction.
Diagram 5
Cleaning Instruction: Clean nished parts with a mild dishwashing liquid and water solution on a damp
cloth. lish the nish with soft cloth and an industry recognized furniture polish. Po


Product specificaties

Merk: Hooker
Categorie: Bed
Model: 5805-90868-96

Heb je hulp nodig?

Als je hulp nodig hebt met Hooker 5805-90868-96 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bed Hooker

Handleiding Bed

Nieuwste handleidingen voor Bed