Hooker 1654-90251-DKW1 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Hooker 1654-90251-DKW1 (3 pagina's) in de categorie Bed. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
1/3
ASSEMBLY INSTRUCTION
ITEM# 1654-90251-DKW1 5/0 Panel Headboard
1654-90252-DKW1 5/0 Panel Footboard
1654-90253-DKW1 5/0-6/6 Rails
Caution: Please make sure you have all parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more persons.
NO. HARDWARE LIST
E
F
G
H
K
R
Q
V
U
M
8
1
8
8
16
1
8
8
8
1
Q'TY
NUT
SPANNER WRENCH
CURVERD WASHER
FULL THREADED BOLT
SCREW
4mm ALLEN WRENCH
5mm ALLEN WRENCH
BOLT
LOCK WASHER
FLAT WASHER
Diagram 1
2/3
Assembly steps:
1. Insert 2 bolts (H) into holes and Footboard (B), attach end of side of each posts on Headboard (A)
rails (C) to the bolts (H) on posts using 2 curved washers (G) and 2 nuts (E), tighten nuts (E) securely
with spanner wrench (F). (See diagram 1)
D
L
R
Q
V
U
Diagram 2
2. Take out center supports (L) from rail box, attach center supports (L) to slats using 2 bolts (Q), 2 lock
washers (V) and 2 flat washers (U). Securing the bolts (Q) by using Allen wrench (R). (See diagram
2)
D
k
C
Diagram 3
3. Attach slats (D) to side rails (C), align pre-drilled holes on the slat to holes on the cleat of side rail
(C), using screws (K) to tighten both. (See diagram 3)
3/3
Note: You can change the height of slat by adjusting the height of cleat on side rail as shown in diagram
4, remove the bolt (Q), lock washer (V) and flat washer (U) from the cleat by turning the bolt (Q)
with Allen wrench (M) i ction, adjust the cn anti-clockwise dire leat to a desired position, and then
secure the lock washer, flat washer, bolt in a clockwise direction by turning with Allen wrench.
Diagram 4
You can adjust the height of center supports (L) as shown in Diagram 5 to meet your need by following
steps.
1. Unscrew bolts on center supports (L) with Allen wrench (R).
2. Adjust the height of center supports, align the holes on 2pcs of woods and tighten them together with
2 bolts(Q), 2 lock washers (V) and two flat washers（ ）U by turning with Allen wrench(R) in a clockwise
direction.
D
L
V
R
Q
U
Diagram 5
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp cloth.
Polish the finish with soft cloth and an industry recognized furniture polish.
Product specificaties
| Merk: | Hooker |
| Categorie: | Bed |
| Model: | 1654-90251-DKW1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Hooker 1654-90251-DKW1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bed Hooker
6 Januari 2024
6 Januari 2024
6 Januari 2024
6 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
Handleiding Bed
- Bed IKEA
- Bed BabyGO
- Bed Bopita
- Bed Delta
- Bed Flexa
- Bed Florabest
- Bed Gude
- Bed Habitat
- Bed Intex
- Bed Invacare
- Bed Kogan
- Bed Livarno
- Bed Maxi-Cosi
- Bed Mio
- Bed Tchibo
- Bed Uppababy
- Bed Vermeiren
- Bed Wehkamp
- Bed Woood
- Bed Jane
- Bed Jysk
- Bed Lionelo
- Bed Leen Bakker
- Bed Parisot
- Bed Talgø
- Bed Tvilum
- Bed Paidi
- Bed Vipack
- Bed Bell'O
- Bed Beter Bed
- Bed Dormiente
- Bed Flintshire
- Bed KidKraft
- Bed Lifetime
- Bed Loof
- Bed MADE
- Bed Stompa
- Bed Trasman
- Bed Ovela
- Bed Meubelco
- Bed Carlson
- Bed Burmeier
- Bed Koala
- Bed Boori
- Bed Calligaris .com
- Bed Gami
- Bed Livarno Lux
- Bed Dorel
- Bed X Rocker
- Bed Fantastic
- Bed Shangri-La
Nieuwste handleidingen voor Bed
29 November 2024
29 November 2024
29 November 2024
29 November 2024
29 November 2024
29 November 2024
29 November 2024
29 November 2024
25 November 2024
17 November 2024