Honeywell TurboForce HHF565B Handleiding

Honeywell Heater TurboForce HHF565B

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell TurboForce HHF565B (24 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

IMPORTANT

SAFETY INSTRUCTIONS

WARNING – READ AND SAVE THESE OPERATING

AND SAFETY INSTRUCTIONS BEFORE USING THIS

HEATER. IF YOU DO NOT UNDERSTAND THESE

INSTRUCTIONS OR PRODUCT LABELS PLEASE

CALL OUR CUSTOMER REPRESENTATIVES AT

1-800-477-0457 FOR ASSISTANCE BEFORE

USING THIS PRODUCT.

Warning – Failure to follow any of these safety

instructions could result in fire, injury, or death.

YOUR RESPONSIBILITIES

Electrical appliances may expose people to hazards

that can cause severe injury as well as death. The use

of electrical products may create hazards that include,

but are not limited to, injury, fire, electric shock and

electrical system damage. These instructions are

intended to provide you with the information you need

to use the product correctly and to avoid such hazards.

When using electrical appliances, basic precautions

should always be followed to reduce risk of fire,

electric shock, and injury to persons including the

following:

1. Warning – Read all instructions before using

this heater.

2. Warning – This heater is hot when in use. To

avoid burns, let bare skin touch hot DO NOT

surfaces. Use handles when moving this heater.

Keep combustible materials, such as furniture,

pillows, bedding, papers, clothes, and curtains at

least 3 feet (0.9m) from the front of the heater

and keep them away from all sides of the heater.

3. Warning – Extreme caution is necessary when

any heater is used by or near children or invalids,

and whenever the heater is left operating and

unattended.

4. Warning – ALWAYS unplug heater when not

in use.

5. Warning – DO NOT operate any heater with

a damaged cord or plug, any heater that

malfunctions, or any heater that has been

dropped or damaged in any manner. Discard

heater or return heater to authorized service

facility for examination and/or repair.

6. Warning – For residential use only.

7. Warning – DO NOT use outdoors.

8. Warning – This heater is not intended for use

in bathrooms, laundry areas, and similar indoor

locations. DO NOT locate heater where it may

fall into a bathtub or other water container.

9. Warning – DO NOT run cord under carpeting.

DO NOT cover cord with throw rugs, runners,

or similar coverings. route cord under DO NOT

furniture or appliances. Arrange cord away from

traffic areas and where it will not be a tripping

hazard.

10. Warning – This appliance has a polarized plug

(one blade is wider than the other). To reduce

the risk of electric shock, this plug is intended to

fit in a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician.

DO NOT attempt to defeat this safety feature.

11. Warning – This heater draws 12.5 amps during

operation. To prevent overloading a circuit,

DO NOT plug the heater into a circuit that already

has other appliances working.

TURBOFORCE®

HEATER FAN

HHF550 AND HHF565 SERIES

SET UP

12. Warning – It is normal for the plug to feel warm

to the touch; however, a loose fit between the

AC outlet (receptacle) and plug may cause

overheating and distortion of the plug. Contact a

qualified electrician to replace loose or worn outlet.

13. Warning – To disconnect the heater, first turn off

the product, then grip the plug body and pull it

from the wall outlet. pull by the cord.DO NOT

14. Warning – DO NOT insert or allow foreign objects

to enter any ventilation or exhaust opening as

this may cause electric shock, fire, or damage

to the heater.

15. Warning – To prevent a possible fire, DO NOT

block air intakes or exhaust in any manner.

DO NOT use on soft surfaces, like a bed, or where

openings may become blocked.

16. Warning – A heater has hot and arcing or

sparking parts inside. use it in areas DO NOT

where gasoline, paint or flammable liquids are

used or stored.

17. Warning – Use this heater only as described in this

manual. Any other use not recommended by the

manufacturer may cause fire, electric shock, or

injury to persons.

18. Warning – ALWAYS plug heater directly into

a wall outlet/receptacle. use with an DO NOT

extension cord or relocatable power tap

(outlet/power strip).

19. NEVER Warning – tamper with this product

or attempt to fix it. Any tampering with, or

modification of this product can result in serious

injury, death, or fire. open. Risk of electric DO NOT

shock. There are no user serviceable parts inside.

20. Warning – DO NOT remove product labels

that contain warnings or safety instruction.

21. Caution – The output of this heater may vary

and its temperature may become intense enough

to burn exposed skin. Use of this heater is not

recommended for persons with reduced sensitivity

to heat or an inability to react to avoid burns.

22. Caution – Before cleaning, or storage, or when

not in use, turn the product’s controls to the OFF

position and unplug the heater from the electrical

outlet and allow to cool.

23. Caution – Place the heater on a firm, level, open

surface free from obstructions and at least 3 feet

(0.9m) away from any combustible materials.

DO NOT use on an unstable surface such as

bedding or deep carpeting. Be sure the heater

is not in a position where it may be tripped over

by small children or pets.

24. Caution – If your home has aluminum wiring

have a licensed electrician check your receptacle’s

connections. When using a 1500 watt heater,

aluminum wire connections can cause a safety issue.

25. SAVE THESE INSTRUCTIONS

The Honeywell TurboForce® Heater Fan requires no assembly. Simply unpack heater and save all packaging

materials for off-season storage.

Place the heater on a ﬁrm, level, open surface free from obstructions and at least 3 feet (0.9m) away from

any wall or combustible material.

DO NOT use on an unstable surface such as bedding or deep carpeting.

BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY CHILDREN OR PETS.

The TurboForce® Heater is also equipped with both a

pivoting head and oscillation to provide heat ﬂow how

and where you want it most.

3 WAY PIVOT (Fig. 2) – the head of the heater can

be adjusted up at 3 different angles - 15°, 30°, 45°

- to provide more focused heat ﬂow within the room.

• The 15° pivot angle – allows the heat to ﬂow more

directly at a seated level.

• The 30° pivot angle – provides heat ﬂow at a

standing level.

• The 45° pivot angle – directs heat ﬂow towards the

ceiling. This angle is ideal to help generate

whole room heat circulation.

OSCILLATION – the TurboForce® Heater also has an

oscillation feature which distributes warmed air over

a wider area for increased whole room heat circulation.

• To activate the oscillation feature, press the oscillation

( ) button once. Press the oscillation button again

to turn the oscillation feature off.

• Turn the Power Knob to OFF ( ) and allow it to cool

for 10 minutes, then unplug the heater when you are

ﬁnished using it.

Fig. 2Fig. 2

15º 30º 45º

MOVING THE HEATER

This heater is equipped with a recessed carrying handle for your convenience.

Turn off the heater. Allow it to cool for ten minutes. Unplug heater and move.

OPERATION

NOTE: The Honeywell TurboForce® Heater requires

no assembly.

NOTE: Never leave an operating unit unattended

Model HHF550 Series – Manual TurboForce®

Heater Operation

With the Power Knob in the OFF ( ) position, plug the

heater into a polarized 120V outlet. DO NOT FORCE

THE POLARIZED PLUG INTO THE OUTLET;

it will only ﬁt one way.

The Power Knob is equipped with three (3) settings:

(Fig. 1) Fan Only ( ), Low ( ) and High ( ). The

Low ( ) heat setting uses 750 watts of power and the

High ( ) heat setting uses 1500 watts of power. The

Fan only ( ) setting uses very low power and does

not provide heat. You can select the proper setting to

accommodate your comfort level with the Power Knob.

When you choose any setting the red Power Light will

come on. The Low ( ) heat setting does not require as

much electricity to operate, it is more energy efﬁcient

and may be a better option if you are concerned about

the amperage draw on a circuit when the heater is on

the High setting. Use the Fan only setting for optimal

comfort level year round.

NOTE: Controls/features will vary slightly by model

Fig. 1

Power Knob

Fan Only

Off Position

Low Heat

High Heat

Oscillation

Product specificaties

Merk:	Honeywell
Categorie:	Heater
Model:	TurboForce HHF565B

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell TurboForce HHF565B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heater Honeywell

Honeywell VersaHeat HHF260 Handleiding

18 December 2023

Honeywell EnergySmart HZ-7300 Handleiding

21 November 2023

Honeywell Thermawave 6 HCE870 Handleiding

8 November 2023

Honeywell Thermawave 6 HCE870C Handleiding

8 November 2023

Honeywell HHF175 Handleiding

8 November 2023

Honeywell ComfortTemp 4 HCE640 Handleiding

8 November 2023

Honeywell ComfortTemp 4 HCE645 Handleiding

8 November 2023

Honeywell Home Comfort+ HR30 Handleiding

26 Oktober 2023

Honeywell HWLHHF360VV2 Handleiding

8 Augustus 2023

Honeywell EnergySmart HZ-970 Handleiding

7 Juni 2023

Handleiding Heater

Nieuwste handleidingen voor Heater

Trisa 9330.44 Handleiding

18 December 2024

Hortus 211-413 Handleiding

18 December 2024

Yamazen HF-L122 Handleiding

18 December 2024

Yamazen HF-D121 Handleiding

18 December 2024

Yamazen HF-L121 Handleiding

18 December 2024

Universal Blue UCRA9104-24 Handleiding

18 December 2024

Orava VL-203 Handleiding

18 December 2024

SHX HL20OSZ Handleiding

16 December 2024

Stanley ST-125T-KFA-ES Handleiding

16 December 2024

Perel PHS2000 Handleiding

14 December 2024