Honeywell EnergySmart HZ-7300 Handleiding

Honeywell Heater EnergySmart HZ-7300

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell EnergySmart HZ-7300 (10 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

IMPORTANT SAFETY

INSTRUCTIONS

WARNING – READ AND SAVE THESE

OPERATING AND SAFETY INSTRUCTIONS

BEFORE USING THIS HEATER. IF YOU DO

NOT UNDERSTAND THESES INSTRUCTIONS OR

PRODUCT LABELS PLEASE CALL

OUR CUSTOMER REPRESENTIVIES AT

(800) 477-0457 FOR ASSISTANCE BEFORE

USING THIS PRODUCT.

Warning – Failure to follow any of these safety

instructions could result in fire, injury or death.

YOUR RESPONSIBILITIES

Electrical appliances may expose people to

hazards that can cause severe injury as well as

death. The use of electrical products may create

hazards that include, but are not limited to,

injury, fire, electrical shock and electrical system

damage. These instructions are intended to

provide you with the information you need to

use the product and to avoid such hazards.

When using electrical appliances, basic

precautions should always be followed to

reduce risk of fire, electric shock, and injury to

persons including the following:

1. Warning – Read all instructions before using

this heater.

2. Warning – This heater is hot when in use.

To avoid burns, do not let bare skin touch

hot surfaces. If, provided, use handles

when moving this heater. Keep combustible

materials, such as furniture, pillows,

bedding, papers, clothes, and curtains at

least 3 feet (0.9 m) from the front of the

heater and keep them away from the sides

and rear.

3. Warning – Extreme caution is necessary

when any heater is used by or near children

or invalids, and whenever the heater is left

operating and unattended.

4. Warning – Always unplug heater when not

in use.

5. Warning – Do not operate any heater with

a damaged cord or plug or after the heater

malfunctions, has been dropped or damaged

in any manner. Discard heater or return

heater to authorized service facility for

examination and/or repair.

6. Warning – For residential use only.

7. Warning – Do not use outdoors.

8. Warning – This heater is not intended for

use in bathrooms, laundry areas and similar

indoor locations. Never locate heater where

it may fall into a bathtub or other water

container.

9. Warning – Do not run cord under carpeting.

Do not cover cord with throw rugs, runners,

or similar coverings. Do not route cord

under furniture or appliances. Arrange cord

away from traffic area and where it will not

be tripped over.

E S nErgy mart®

C tool ouCh EatErS h

m hZ-7200 S odEl EriES

m hZ-7300 S odEl EriES

m hZ-8000 SodEl EriES

The Honeywell Trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.

Honeywell International Inc. makes no representation or warranties with respect to this product.

MOVING THE HEATERSET-UP

10. CAUTION – THIS APPLIANCE HAS A

POLARIZED PLUG (ONE BLADE IS WIDER

THAN THE OTHER). TO REDUCE THE RISK

OF SHOCK, THIS PLUG IS INTENDED TO

FIT ONLY ONE WAY IN A POLARIZED

OUTLET. IF THE PLUG DOES NOT FIT

SECURELY IN THE OUTLET, REVERSE

THE PLUG. IF IT STILL DOES NOT FIT,

CONTACT A QUALIFIED ELECTRICIAN. DO

NOT ATTEMPT TO DEFEAT THIS SAFETY

FEATURE.

11. Warning – This heater draws 12.5 amps

during operation. To prevent overloading a

circuit, do not plug the heater into a circuit

that already has other appliances working.

12. Warning – It is normal for the plug to feel

warm to the touch; however, a loose fit

between the AC outlet (receptacle) and plug

may cause overheating and distortion of

the plug. contact a qualified electrician to

replace loose or worn outlet.

13. Warning – To disconnect the heater, first

turn off the product, then grip the plug body

and pull it from the wall outlet. Never pull by

the cord.

14. Warning – Do not insert or allow foreign

objects to enter any ventilation or exhaust

opening as this may cause an electric shock

or fire, or damage the heater.

15. Warning – To prevent a possible fire, do not

block air intakes or exhaust in any manner.

Do not use on soft surfaces, like a bed, or

where openings may become blocked.

16. Warning – A heater has hot and arcing or

sparking parts inside. Do not use it in areas

where gasoline, paint or flammable liquids

are used or stored.

17. Warning – Use this heater only as

described in this manual. Any other use

not recommended by the manufacturer

may cause fire, electric shock, or injury to

persons.

18. Warning – Always plug heater directly into

a wall outlet/receptacle. Never use with an

extension cord or relocatable power tap

(outlet/power strip).

19. Warning – Never tamper with this product

or attempt to fix it. Any tampering with, or

modification of this product can result in

serious injury, death, or fire. Risk of electric

shock. Do not open. No user serviceable

parts inside.

20. Warning – Do not remove product labels

that contain warnings or safety instruction.

21. Caution – The output of this heater may vary

and its temperature may become intense

enough to burn exposed skin. Use of this

heater is not recommended for persons with

reduced sensitivity to heat or an inability to

react to avoid burns.

22. Caution – Before cleaning, or storage, or

when not in use, turn the product’s controls

to the OFF position and unplug the heater

from the electrical outlet and allow to cool.

23. Caution – Place the heater on a firm, level,

open surface free from obstructions and

at least 3 feet (0.9 m) away from any

combustible materials. DO NOT use on an

unstable surface such as bedding or deep

carpeting. Be sure the heater is not in a

position where it may be tripped over by

small children or pets. The heater’s rubber

feet will hold it firmly in position.

24. Caution – If your home has aluminum

wiring have a licensed electrician check

your receptacle’s connections. When

using a 1500 watt heater, aluminum wire

connections can cause a safety issue.

25. SAVE THESE

INSTRUCTIONS

Place the heater on a rm, level, open surface free from

obstructions and at least 3 feet (0.9 m) away from any wall

or combustible material.

DO NOT use on an unstable surface such as bedding or

deep carpeting.

BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY

BE TRIPPED OVER BY CHILDREN OR PETS.

Turn o the heater.

Allow it to cool for ten minutes.

Unplug heater and move. This heater is equipped with a

convenient carrying handle for your convenience.

OPERATION (continued)

SAFETY FEATURES

TROUBLESHOOTING

This EnergySmart® Cool Touch Heater is equipped with several devices and features for added protection:

- This heater was crafted using a high quality safety plastic which allows for the “Cool Touch” exterior. If the heater grille is

touched briey, it will not cause a burn. For safe operation, do not continuously hold bare skin against the grille..

• Tip over protection – a tip-over switch that disables the heater if it is accidentally tipped over.

• A high temperature safety control prevents overheating.

• Thermal cut-o fuse that will permanently shut down the heater should it operate at a higher than normal temperature.

It is recommended that the heater be cleaned at least once a month and before o-season storage.Save the carton for o-season storage.

• Turn the heater OFF ( ) and unplug it. Allow it to cool.

• Use a dry cloth to clean only the external surfaces of the heater. DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION.

• Before storing, clean the EnergySmart® Cool Touch Heater using the above-mentioned steps. Wrap the cord around its cord wrap

underneath the heater base. Pack the heater in its original carton and store it in a cool, dry place.

If your heater shuts o unexpectedly or fails to operate, one of your heater safety features may have been activated to prevent overheating.

• Be sure it is plugged in and that the electrical outlet is working.

• Check your EnergySmart® Thermostat setting. The unit may simply be o because you have reached your desired heat setting.

• Check for any obstructions. If you nd an obstruction, turn the heater OFF and unplug it. Allow the heater to cool completely,

then remove the obstruction. Wait at least 10 minutes, then re-plug the heater in and follow the OPERATION instructions.

CLEANING AND STORAGE

NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO

NOT RETURN THE HEATER TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING

YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.

The Current Temp Indicator will display the current room

temperature.

In the EnergySmart® mode, the Energy Usage Indicator will display

what power consumption the heater has automatically selected to

eciently meet your Desired Temperature.

To override the EnergySmart® function, turn the heater OFF ( ) or

press SET to choose a Constant Heat mode.

EnergySmart™ Mode - A smart thermostat that helps you

save energy. Press SET to choose four (4) comfort settings of

65°F (18°C), 70°F (21°C), 75°F (24°C), 80°F (27°C). This is

NOTE: Because the Low setting does not require as much electricity

to operate, it is more energy ecient and may be a better option if

you are concerned about saving energy.

To set the heater, the digital control is equipped with two

(2) modes: (See Fig. 2)

Constant Heat Mode - Choose from two (2) heat settings:

1. Constant Low, press SET to LO; this setting uses 900 watts

of power

2. Constant High, press SET to HI; this setting uses 1500 watts

of power

your desired room temperature. The EnergySmart® thermostat

will automatically select the appropriate power level to best

accommodate your Desired Temperature. As the air temperature

(Current Temp) in the room approaches the Desired Temperature,

the heater will automatically lower the power consumption to

provide consistent warmth without wasting energy.

Product specificaties

Merk:	Honeywell
Categorie:	Heater
Model:	EnergySmart HZ-7300

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell EnergySmart HZ-7300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heater Honeywell

Honeywell VersaHeat HHF260 Handleiding

18 December 2023

Honeywell EnergySmart HZ-7300 Handleiding

21 November 2023

Honeywell Thermawave 6 HCE870 Handleiding

8 November 2023

Honeywell Thermawave 6 HCE870C Handleiding

8 November 2023

Honeywell HHF175 Handleiding

8 November 2023

Honeywell ComfortTemp 4 HCE640 Handleiding

8 November 2023

Honeywell ComfortTemp 4 HCE645 Handleiding

8 November 2023

Honeywell Home Comfort+ HR30 Handleiding

26 Oktober 2023

Honeywell HWLHHF360VV2 Handleiding

8 Augustus 2023

Honeywell EnergySmart HZ-970 Handleiding

7 Juni 2023

Handleiding Heater

Nieuwste handleidingen voor Heater

Omega Altise OABRFLPSD Handleiding

20 November 2024

Reer Viera TX-49FSW504 Handleiding

19 November 2024

Sonnenkonig OFR5A Mini Handleiding

19 November 2024

Yamazen DC-X071 Handleiding

19 November 2024

Yamazen YDH-M10 Handleiding

19 November 2024

Cecotec ReadyWarm 1800 Thermal Connected Handleiding

19 November 2024

Cecotec ReadyWarm 1500 Max Ceramic Handleiding

18 November 2024

Cecotec ReadyWarm 2500 Thermal Connected Handleiding

18 November 2024

Yamazen DBC-L0952 Handleiding

18 November 2024

Yamazen HF-D12 Handleiding

18 November 2024