Honeywell HZ-7200 Handleiding

Honeywell Heater HZ-7200

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell HZ-7200 (12 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS

BEFORE USING THIS HEATER. IF YOU DO

NOT UNDERSTAND THESE INSTRUCTIONS OR

PRODUCT LABELS DO NOT USE THIS PRODUCT

AND CALL US AT (800) 477-0457 FOR AN

EXPLANATION.

WARNING – Failure to follow any of these safety

instructions could result in re, injury or death.

YOUR RESPONSIBILITIES

Electrical appliances may expose people to hazards

that can cause severe injury as well as death. The use

of electrical products may create hazards that include,

but are not limited to, injury, re, electrical shock

and electrical system damage. These instructions are

intended to provide you with the information you need

to use the product and to avoid such hazards.

1. Read all instructions before using this heater.

2. This heater is hot when in use. To avoid burns, do

not let bare skin touch hot surfaces. If, provided, use

handle when moving this heater. Keep combustible

materials, such as furniture, pillows, bedding,

papers, clothes, and curtains at least 3 feet (0.9 m)

from the front of the heater and keep them away

from the sides and rear.

3. Extreme caution is necessary when any heater is

used by or near children or invalids, and whenever

the heater is left operating and unattended.

4. Always unplug heater when not in use.

5. Do not operate any heater with a damaged cord

or plug or after the heater malfunctions, has been

dropped or damaged in any manner. Return heater

to authorized service facility for examination,

electrical or mechanical adjustment, or repair.

6. Do not use outdoors.

7. This heater is not intended for use in bathrooms,

laundry areas and similar indoor locations. Never

locate heater where it may fall into a bathtub or

other water container.

8. Do not run cord under carpeting. Do not cover cord

with throw rugs, runners, or the like. Arrange cord

away from trac area where it will not be tripped

over.

9. CAUTION - THIS APPLIANCE HAS A POLARIZED

PLUG (ONE BLADE IS WIDER THAN THE OTHER).

TO REDUCE THE RISK OF SHOCK, THIS PLUG IS

INTENDED TO FIT ONLY ONE WAY IN A POLARIZED

OUTLET. IF THE PLUG DOES NOT FIT SECURELY IN THE

OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT

FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT

ATTEMPT TO DEFEAT THIS SAFETY FEATURE.

10. This heater draws 12.5 amps during operation. To

prevent overloading a circuit, do not plug the heater

into a circuit that already has other appliances

working.

11. It is normal for the plug to feel warm to the

touch; however, a loose t between the AC outlet

(receptacle) and plug may cause overheating and

distortion of the plug. Contact a qualied electrician

to replace loose or worn outlet.

12. To disconnect the heater, rst turn o the product,

then grip the plug and pull it from the wall outlet.

Never pull by the cord.

13. Do not insert or allow foreign objects to enter any

ventilation or exhaust opening as this may cause an

electric shock or re, or damage the heater.

14. To prevent a possible re, do not block air intakes or

exhaust in any manner. Do not use on soft surfaces,

like a bed, or where openings may become blocked.

15. A heater has hot and arcing or sparking parts inside.

E S nErgy mart™

C tool ouCh EatEr h

m hZ-7200 SodEl EriES

The Honeywell trademark is used by Kaz, Inc. under license from Honeywell Intellectual Properties Inc.

OPERATION

Do not use it in the areas where gasoline, paint or

ammable liquids are used or stored.

16. Use this heater only as described in this manual. Any

other use not recommended by the manufacturer

may cause re, electric shock, or injury to persons.

17. Avoid the use of an extension cord because the

extension cord may overheat and cause a risk of re.

However, if you have to use an extension cord, the

cord shall be No. 14 AWG minimum size and rated

not less than 1875 watts.

18. Never tamper with this product or attempt to x it.

Any tampering with, or modication of, this product

can result in serious injury, death, or re. Risk of

electric shock. Do not open, no user serviceable

parts inside.

19. Do not remove product labels that contain warnings

or safety instruction.

20. The output of this heater may vary and its

temperature may become intense enough to burn

exposed skin. Use of this heater is not recommended

for persons with reduced sensitivity to heat or an

inability to react to avoid burns.

21. Before cleaning, or storage, or when not in use, turn

the fan to the o position and unplug the heater

from the electrical outlet.

22. Place the heater on a rm, level, open surface free

from obstructions and at least 3 feet (0.9 m) away

from any combustible materials. DO NOT use on an

unstable surface such as bedding or deep carpeting.

Be sure the heater is not in a position where it

may be tripped over by small children or pets. The

heater’s rubber feet will hold it rmly in position.

23.

SAVE THESE INSTRUCTIONS

• Place the heater on a rm, level, open surface free from

obstructions and at least 3 feet (0.9 m) away from any

combustible materials.

• Never leave an operating unit unattended.

• Plug the heater into an electrical wall outlet.

• Touch the power button ( ) to turn the heater on.

The power indicator light will illuminate. Fig. 1

• To save up to 35% in energy bills, turn the Energy

Smart™ knob to your desired temperature. There are four

distinct settings of 65°F/18°C, 70°F/ 21°C, 75°F/23°C, and

80°F/26°C. The Energy Smart™ heater will automatically

select the appropriate power level to best accommodate

your desired temperature. As the air temperature in

the room approaches the set temp, the heater will

automatically lower the power consumption and provide

consistent warmth without wasting energy.

• The illuminated LED lights will indicate what the current

room temperature is.

• This heater is equipped with a “frost watch” which automatically turns the unit on if the temperature drops below 55°F/12°C

degrees to help protect against freezing pipes or frost damage

• To override the Energy Smart™ feature and produce maximum heat, turn the knob fully clockwise to “High”. This will

produce 1500W of heat at all times.

• To turn on the oscillation feature, press the ( ) button once. To turn it o, press the ( ) button once more. Please note,

the oscillation function will stop when the Energy Smart™ mode has reached the desired temperature and the heater is no

longer blowing warm air. It will start back up when the heater starts blowing warm air again.

Fig. 1

Power

Button

Control Knob Oscillation

Button

Power Indicator Light

OTHER FEATURES

• This heater is equipped with a high temperature safety control and a thermal circuit breaker to help prevent overheating.

• This heater was crafted using a high quality safety plastic which allows for the “Cool-to-the-touch” exterior. If the heater grille is

touched briey, it will not cause a burn. For safe operation, do not continuously hold bare skin against the grille.

• This heater has a convenient carrying handle for ease of use.

TROUBLESHOOTING

If your heater shuts o unexpectedly or fails to operate, one of your heater safety features may have been activated to prevent

overheating.

• Be sure it is plugged in and that the electrical outlet is working.

• Check your Thermostat setting. The unit may simply be o because you have reached your desired heat setting.

• Check for any obstructions. If you nd an obstruction, turn the heater OFF and unplug it. Allow the heater to cool completely,

then remove the obstruction. Wait at least 10 minutes, then re-plug the heater in and follow the OPERATION instructions.

It is recommended that the heater be cleaned at least once a month. ALWAYS TURN THE POWER SELECTOR OFF AND UNPLUG THE

HEATER BEFORE CLEANING.

Save the carton for o-season storage.

• Turn the heater OFF, unplug it and wait for the heater to cool.

• Use a dry cloth to clean only the external surfaces of the heater. DO NOT USE WATER, WAX OR POLISH.

• Wrap the cord around its cord wrap underneath the heater base. Pack the heater in its original carton and store it

in a cool, dry place.

CLEANING AND STORAGE

CONSUMER RELATIONS

Mail questions or comments to:

Kaz, Incorporated

Consumer Relations Dept.

250 Turnpike Road

Southborough, MA 01772

Call us toll-free at: 1-800-477-0457

E-mail: consumerrelations@kaz.com

Or visit our website at: www.kaz.com

Please be sure to specify a model number.

NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST

NOT RETURN THE HEATER TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO

YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODU

This product is rated 12.5 Amps (1500 watts) @ 120V, 60Hz.

ELECTRICAL RATING

Product specificaties

Merk:	Honeywell
Categorie:	Heater
Model:	HZ-7200
Materiaal behuizing:	Kunststof
Indicatielampje:	Ja
AC-ingangsspanning:	120 V
AC-ingangsfrequentie:	60 Hz
Verwarmingsvermogen:	1500 W
Verwarming power (min):	- W