Honeywell HZ-341 Handleiding

Honeywell Heater HZ-341

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell HZ-341 (44 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/44

DIGITAL CERAMIC EATERH

Model HZ-339 Series

Model HZ-341 Series

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, basic

precautions should always be followed to

reduce the risk of fire, electric shock, and

injury to persons, including the following:

1. Read all instructions before using this heater.

2. This heater is hot when in use. To avoid burns,

do not continually let bare skin touch hot

surfaces. If provided, use handle when moving

this heater. Keep combustible materials, such as

furniture, pillows, bedding, papers, clothes, and

curtains at least 3 feet (0.9 m) from the front of

the heater and keep them away from the sides

and rear.

3. Extreme caution is necessary when any heater is

used by or near children or invalids and whenever

the heater is left operating and unattended.

4. Always unplug heater when not in use.

5. Do not operate any heater with a damaged cord

or plug or after the heater malfunctions, has been

dropped or damaged in any manner.

6. Do not use outdoors.

7. This heater is rated at 1500W, 120 VAC. It is

intended for use on tabletops or desktops and

floors. It is not to be used in wet or moist

locations, such as bathrooms and laundry areas.

If an extension cord must be used, it must be 14

gauge or larger and rated no less than 1875

watts.

8. Do not run cord under carpeting. Do not cover

cord with throw rugs, runners, or the like.

Arrange cord away from traffic area where it will

not be tripped over.

9. This appliance has a polarized plug (one blade is

wider than the other). To reduce the risk of

shock, this plug is intended to fit only one way in

a polarized outlet. If the plug does not fit

securely in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician.

DO NOT attempt to defeat this safety feature.

10. This heater draws 12.5 amps during operation

when in the high setting. To prevent overloading

a circuit, do not plug the heater into a circuit that

already has other appliances working.

11. It is normal for the plug to feel warm to the touch;

however, a loose fit between the AC outlet

(receptacle) and plug may cause overheating and

distortion of the plug. Contact a qualified

electrician to replace loose or worn outlet.

12. To disconnect the heater, first turn controls to the

OFF position, then grip the plug and pull it from

the wall outlet. Never pull by the cord.

13. Do not insert or allow foreign objects to enter any

ventilation or exhaust opening as this may cause

an electric shock or fire, or damage the heater.

14. To prevent a possible fire, do not block air intakes

or exhaust in any manner. Do not use on soft

surfaces, like a bed, where openings may

become blocked.

15. A heater has hot and arcing or sparking parts

inside. Do not use it in the areas where gasoline,

paint, or flammable liquids are used or stored.

16. Use this heater only as described in this manual.

Any other use not recommended by the

manufacturer may cause fire, electric shock, or

injury to persons.

17. The output of this heater may vary and its

temperature may become intense enough to burn

exposed skin. Use of this heater is not

recommended for persons with reduced

sensitivity to heat or an inability to react to avoid

burns.

18. SAVE THESE

INSTRUCTIONS

The Honeywell trademark is used by Kaz, Inc. under license from Honeywell Intellectual Properties, Inc.

HZ-339_341_OM_Rev2.qxd 6/22/05 5:15 PM Page 1

This heater is equipped with SureSet

™Digital Controls that provide the ability to set the temperature to the

exact degree desired. To operate, simply follow these instructions.

S T E P 1 : P O W E R

• Press the Power button ( ) once to start the heater on High

Power ( ), Continuous Run ( ) (Fig. 1). If left at this setting,

the unit will run continuously on High Power (1500 watts, 12.5

amps) and will not shut off until the unit is manually turned

off.

• Press the Power button ( ) again to change to Low Power ( ),

Continuous Run ( ). If left at this setting, the unit will run

continuously on Low Power (900 watts, 7.5 amps) and will not

shut off until the unit is manually turned off.

• Press the Power button ( ) a third time to turn the heater OFF.

NOTE: If operated at the Low setting, the heater will not provide as much heat output as in the High

setting, however, the Low setting will not require as much electrical current to operate. To avoid

overloading a circuit, do not plug the heater into a circuit that already has other appliances working.

S T E P 2 : S E T T E M P E R AT U R E

• Press the Temp/Timer button ( ) until the Temperature Icon

( ) blinks. The current room temperature will appear (Fig. 2).

• Use the Up and Down arrow buttons ( ) to set the Desired

Temperature (Fig. 2).

• The Temperature Icon ( ) will stop blinking and the current room

temperature will reappear after the Desired Temperature is set.

• The heater will turn off shortly after the Desired Temperature is

reached and the Temperature Display will blink.

• The heater will turn back on when the room temperature drops

below the Desired Temperature. The Temperature Display will

then stop blinking and will display the current room temperature.

S T E P 3 : S E T T I M E R

NOTE: This function should only be set if you desire that the heater

be automatically shut off after a certain period of time (1 to 10 hours

from the time the function is set). Always set the Desired

Temperature prior to setting the Timer (see Step 2) so that the heater

will shut off at the Desired Temperature setting and not run

continuously.

• Press the Temp/Timer button ( ) until the Timer Icon ( ) blinks. The Hour Display will appear.

The Auto Off icon will also appear (Fig. 3).

• Use the Up and Down arrow buttons ( ) to set the heater operation time between 1 and 10 hours

(Fig. 3). Once the timer function is set the hour set will remain displayed until the time set runs out.

• The heater will automatically turn off when time runs out.

NOTE: If the Desired Temperature was set prior to setting the Timer function, the heater will cycle on and

off as per the selected Desired Temperature setting. To return to the Continuous Run Mode (Fig. 1), press

the Temp/Timer button ( ) a third time.

OPERATION

Fig. 3

Fig. 2

Fig. 1 Continuous Run Icon

Temperature Icon

Timer Icon

Auto Off Icon

HZ-339_341_OM_Rev2.qxd 6/22/05 5:15 PM Page 2

REMOTE CONTROL OPERATION (MODEL HZ-341 SERIES ONLY)

Two (2) AAA batteries are included and are required to operate the

Remote Control.

The Remote Control can be stored on the heater when not in use by

hanging the remote on the hook located on the side of the heater

(See Fig. 7).

The Remote Control works the same as the corresponding buttons on

the Control Panel. The Control Panel display on the heater will show

the appropriate icons when the various functions are activated.

S T E P 1 : P O W E R

• Press the Power button ( ) once to start the heater on High

Power ( ), Continuous Run ( ) (Fig. 8). If left at this setting,

the unit will run continuously on High Power (1500 watts, 12.5

amps) and will not shut off until the unit is manually turned

off.

• Press the Power button ( ) again to change to Low Power ( ),

Continuous Run ( ). If left at this setting, the unit will run

continuously on Low Power (900 watts, 7.5 amps) and will not

shut off until the unit is manually turned off.

• Press the Power button ( ) a third time to turn the heater OFF.

OPERATION (CONTINUED)

S T E P 4 : F A H R E N H E I T / C E L S I U S F U N C T I O N

This heater offers the option to read the temperature setting in either

Fahrenheit or Celsius.

• °F/°C feature functions from only the Power or Set Temperature

screens.

• Press °F/°C button to toggle between Fahrenheit and Celsius

(Fig. 4).

S T E P 5 : O S C I L L AT I O N

• The Oscillation feature functions in all Power and Temp/Timer

settings.

• Press the Oscillation button ( ) to

toggle this feature on and off (Fig. 5).

NOTE: This product is equipped with a

SafeGuard™Alert Heat Indicator Badge

(Fig 6). When the SafeGuard™Alert Badge

located on the top of the grill changes from

black to red the grill is hot to the touch.

Do not touch the grille until the unit has

been turned off and the SafeGuard

™Alert

Badge has turned back to black.

Fig. 4

°F/°C Temperature

Display

Fig. 5

Fig. 8

Power

Fig. 7

Fig. 6

Heat

Indicator

Badge

HZ-339_341_OM_Rev2.qxd 6/22/05 5:15 PM Page 3

Product specificaties

Merk:	Honeywell
Categorie:	Heater
Model:	HZ-341

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell HZ-341 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heater Honeywell

Honeywell VersaHeat HHF260 Handleiding

18 December 2023

Honeywell EnergySmart HZ-7300 Handleiding

21 November 2023

Honeywell Thermawave 6 HCE870 Handleiding

8 November 2023

Honeywell Thermawave 6 HCE870C Handleiding

8 November 2023

Honeywell HHF175 Handleiding

8 November 2023

Honeywell ComfortTemp 4 HCE640 Handleiding

8 November 2023

Honeywell ComfortTemp 4 HCE645 Handleiding

8 November 2023

Honeywell Home Comfort+ HR30 Handleiding

26 Oktober 2023

Honeywell HWLHHF360VV2 Handleiding

8 Augustus 2023

Honeywell EnergySmart HZ-970 Handleiding

7 Juni 2023

Handleiding Heater

Nieuwste handleidingen voor Heater

Omega Altise OABRFLPSD Handleiding

20 November 2024

Reer Viera TX-49FSW504 Handleiding

19 November 2024

Sonnenkonig OFR5A Mini Handleiding

19 November 2024

Yamazen DC-X071 Handleiding

19 November 2024

Yamazen YDH-M10 Handleiding

19 November 2024

Cecotec ReadyWarm 1800 Thermal Connected Handleiding

19 November 2024

Cecotec ReadyWarm 1500 Max Ceramic Handleiding

18 November 2024

Cecotec ReadyWarm 2500 Thermal Connected Handleiding

18 November 2024

Yamazen DBC-L0952 Handleiding

18 November 2024

Yamazen HF-D12 Handleiding

18 November 2024