Honda CB500F (2013) Handleiding

Honda Motor CB500F (2013)

Lees hieronder de 📖 handleiding in het Nederlandse voor Honda CB500F (2013) (138 pagina's) in de categorie Motor. Deze handleiding was nuttig voor 99 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/138

Contents

Motorcycle Safety P. 2

Operation Guide P. 16

Maintenance P. 39

Troubleshooting P. 86

Information P. 106

Specifications P. 128

Index P. 132

Welcome

Congratulations on your purchase of a new

Honda motorcycle. Your selection of a

Honda makes you part of a worldwide family

of satisfied customers who appreciate

Honda’s reputation for building quality into

every product.

To ensure your safety and riding pleasure:

● Read this owner’s manual carefully.

● Follow all recommendations and

procedures contained in this manual.

● Pay close attention to safety messages

contained in this manual and on the

motorcycle.

To protect your investment, we urge you to

take responsibility for keeping your

motorcycle well serviced and maintained.

Also, observe the break-in guidelines, and

always perform the pre-ride inspection and

other periodic checks in this manual.

When service is required, remember that

your Honda dealer knows your motorcycle

best. If you have the required mechanical

“know-how” and tools, you can purchase an

official Honda Service Manual to help you

perform many maintenance and repair tasks.

2P. 122

Read the warranty information thoroughly so

that you understand the warranty coverage

and that you are aware of your rights and

responsibilities. 2P. 123

You may also want to visit our website at

www.powersports.honda.com.

www.honda.ca.

Happy riding!

California Proposition 65 Warning

WARNING: This product contains or emits

chemicals known to the State of California to

cause cancer and birth defects or other

reproductive harm.

Canada

A Few Words About Safety

Your safety, and the safety of others, is very

important. Operating this motorcycle safely is

an important responsibility.

To help you make informed decisions about

safety, we have provided operating

procedures and other information on safety

labels and in this manual. This information

alerts you to potential hazards that could

hurt you or others.

Of course, it is not practical or possible to

warn you about all hazards associated with

operating or maintaining a motorcycle. You

must use your own good judgement.

You will find important safety information in

a variety of forms, including:

● Safety labels on the motorcycle

● Safety Messages preceded by a safety alert

symbol and one of three signal words:

DANGER, WARNING, or CAUTION.

These signal words mean:

DANGER

You WILL be KILLED or SERIOUSLY

HURT if you don’t follow instructions.

WARNING

You CAN be KILLED or SERIOUSLY

HURT if you don’t follow instructions.

CAUTION

You CAN be HURT if you don’t follow

instructions.

Other important information is

provided under the following titles:

NOTICE

Information to help you avoid

damage to your motorcycle,

other property, or the

environment.

Motorcycle Safety

This section contains important information for safe riding of your motorcycle.

Please read this section carefully.

Safety Guidelines .........................................P. 3

Safety Labels ................................................P. 7

Safety Precautions .......................................P. 9

Riding Precautions .....................................P. 10

Accessories & Modifications......................P. 14

Loading .......................................................P. 15

Safety Guidelines

continued

Motorcycle Safety

Safety Guidelines

Follow these guidelines to enhance your safety:

● Perform all routine and regular inspections

specified in this manual.

● Stop the engine and keep sparks and flame

away before filling the fuel tank.

● Do not run the engine in enclosed or partly

enclosed areas. Carbon monoxide in exhaust

gases is toxic and can kill you.

It’s a proven fact: helmets and protective

apparel significantly reduce the number and

severity of head and other injuries. So always

wear an approved motorcycle helmet and

protective apparel. 2P. 9

Make sure that you are physically fit, mentally

focused and free of alcohol and drugs. Check

that you and your passenger are both wearing

an approved motorcycle helmet and protective

apparel. Instruct your passenger on holding

onto the grab rails or your waist, leaning with

you in turns, and keeping their feet on the

footpegs, even when the motorcycle is stopped.

Even if you have ridden other motorcycles,

practice riding in a safe area to become familiar

with how this motorcycle works and handles,

and to become accustomed to the motorcycle’s

size and weight.

Always Wear a Helmet

Before Riding

Take Time to Learn & Practice

Safety Guidelines

Motorcycle Safety

We recommend that all riders take a certified

course approved by the Motorcycle Safety

Foundation (MSF). New riders should start with

the basic course, and even experienced riders

will find the advanced course beneficial.

For information about the MSF training course

nearest you, call the national toll-free number:

(800) 446-9227.

Other riding tips can be found in the You

and Your Motorcycle Riding Tips booklet that

came with your motorcycle.

Always pay attention to other vehicles around

you, and do not assume that other drivers see

you. Be prepared to stop quickly or perform an

evasive maneuver.

Make yourself more visible, especially at night,

by wearing bright reflective clothing,

positioning yourself so other drivers can see

you, signaling before turning or changing lanes,

and using your horn when necessary.

Never ride beyond your personal abilities or

faster than conditions warrant. Fatigue and

inattention can impair your ability to use good

judgement and ride safely.

Alcohol and riding don’t mix. Even one

alcoholic drink can reduce your ability to

respond to changing conditions, and your

reaction time gets worse with every additional

drink. Don’t drink and ride, and don’t let your

friends drink and ride either.

Ride Defensively

USA

Make Yourself Easy to See

Ride within Your Limits

Don’t Drink and Ride

Safety Guidelines

continued

Motorcycle Safety

It’s important to keep your motorcycle properly

maintained and in safe riding condition.

Inspect your motorcycle before every ride and

perform all recommended maintenance. Never

exceed load limits ( 2P. 15), and do not modify

your motorcycle or install accessories that

would make your motorcycle unsafe ( 2P. 14).

Personal safety is your first priority. If you or

anyone else has been injured, take time to

assess the severity of the injuries and whether it

is safe to continue riding. Call for emergency

assistance if needed. Also follow applicable

laws and regulations if another person or

vehicle is involved in the crash.

If you decide to continue riding, first evaluate

the condition of your motorcycle. If the engine

is still running, turn it off. Inspect for fluid leaks,

check the tightness of critical nuts and bolts,

and check the handlebar, control levers, brakes,

and wheels. Ride slowly and cautiously.

Your motorcycle may have suffered damage

that is not immediately apparent. Have your

motorcycle thoroughly checked at a qualified

service facility as soon as possible.

Keep Your Honda in Safe Condition

If You are Involved in a Crash

Safety Guidelines

Motorcycle Safety

Exhaust contains poisonous carbon monoxide,

a colorless, odorless gas. Breathing carbon

monoxide can cause loss of consciousness and

may lead to death.

If you run the engine in confined or even partly

enclosed area, the air you breathe could contain

a dangerous amount of carbon monoxide.

Never run your motorcycle inside a garage or

other enclosure.

Carbon Monoxide Hazard

WARNING

Carbon monoxide gas is toxic.

Breathing it can cause

unconsciousness and even kill you.

Avoid any areas or activities that

expose you to carbon monoxide.

Safety Labels

continued

Motorcycle Safety

Safety Labels

Safety and information labels on your

motorcycle provide important safety

information and may warn you of potential

hazards that could cause serious injury. Read

these labels carefully and don’t remove them.

If a label comes off or becomes hard to read,

contact your dealer for a replacement.

Safety Labels

Motorcycle Safety

Safety Precautions

continued

Motorcycle Safety

Safety Precautions

● Ride cautiously and keep your hands on the

handlebar and feet on the footpegs.

● Keep passenger’s hands on the grab rails or

your waist, passenger’s feet on the footpegs

while riding.

● Always consider the safety of your passenger,

as well as other drivers and riders.

Make sure that you and any passenger are

wearing an approved motorcycle helmet, eye

protection, and high-visibility protective

clothing. Ride defensively in response to

weather and road conditions.

❙

Helmet

Should be safety-standard certified, high-

visibility, and correct size for your head

● Must fit comfortably but securely, with the

chin strap fastened

● Face shield with unobstructed field of vision

or other approved eye protection

Look for a DOT (Department of

Transportation) certification label on any helmet

you buy.

❙

Gloves

Full-finger leather gloves with high abrasion

resistance

Protective Apparel

WARNING

Not wearing a helmet increases the

chance of serious injury or death in a

crash.

Make sure that you and any passenger

always wear an approved helmet and

protective apparel.

USA

Riding Precautions

Motorcycle Safety

❙

Boots or Riding Shoes

Sturdy boots with non-slip soles and ankle

protection

❙

Jacket and Pants

Protective, highly visible, long-sleeved jacket

and durable long pants for riding (or a

protective suit).

Riding Precautions

During the first 300 miles (500 km) of running,

follow these guidelines to ensure your

motorcycle’s future reliability and performance.

● Avoid full-throttle starts and rapid

acceleration.

● Avoid hard braking and rapid down-shifts.

● Ride conservatively.

Observe the following guidelines:

● Avoid excessively hard braking and sudden

shifting to a lower gear.

uSudden braking can reduce the

motorcycle’s stability.

uWhere possible, reduce speed before

turning; otherwise you risk wheel slippage.

Break-in Period

Brakes

Riding Precautions

continued

Motorcycle Safety

● Exercise caution on low traction surfaces.

uThe tires slip more easily on such surfaces

and braking distances are longer.

● Avoid continuous braking.

uRepeated braking, such as when

descending long, steep slopes can

seriously overheat the brakes, reducing

their effectiveness. Use engine braking

with intermittent use of the brakes to

reduce speed.

● For full braking effectiveness, operate both

the front and rear brakes together.

❙

Anti-lock Brake System (ABS)

This model is equipped with an Anti-lock Brake

System (ABS) designed to help prevent the

brakes from locking up during hard braking.

● ABS does not reduce braking distance. In

certain circumstances, ABS may result in a

longer stopping distance.

● ABS does not function at speeds below 6

mph (10 km/h).

● The brake lever and pedal may recoil slightly

when applying the brakes. This is normal.

● Always use the recommended tires to ensure

correct ABS operation.

CB500FA only

Riding Precautions

Motorcycle Safety

❙

Engine Braking

Engine braking helps slow your motorcycle

down when you release the throttle. For further

slowing action, downshift to a lower gear. Use

engine braking with intermittent use of the

brakes to reduce speed when descending long,

steep slopes.

❙

Wet or Rainy Conditions

Road surfaces are slippery when wet, and wet

brakes further reduce braking efficiency.

Exercise extra caution when braking in wet

conditions.

If the brakes get wet, apply the brakes while

riding at low speed to help them dry.

● Park on a firm, level paved surface.

● If you must park on a slight incline or loose

surface, park so that the motorcycle cannot

move or fall over.

● Make sure that high-temperature parts

cannot come into contact with flammable

materials.

● Do not touch the engine, muffler, brakes and

other high-temperature parts until they cool

down.

● To reduce the likelihood of theft, always lock

the handlebar and remove the key when

leaving the motorcycle unattended.

Use of an anti-theft device is also

recommended.

❙

Parking with the Side Stand

Stop the engine.

Push the side stand down.

Slowly lean the motorcycle to the left until its

weight rests on the side stand.

Parking

Riding Precautions

Motorcycle Safety

Turn the handlebar fully to the left.

uTurning the handlebar to the right reduces

stability and may cause the motorcycle to

fall.

Turn the ignition switch to the LOCK position

and remove the key. 2P. 33

Follow these guidelines to protect the engine

and catalytic converter:

● Use only unleaded gasoline.

● Use recommended octane number. Using

lower octane gasoline will result in decreased

engine performance.

● Do not use fuels containing a high

concentration of alcohol. 2P. 121

● Do not use stale or contaminated gasoline or

an oil/gasoline mixture.

● Avoid getting dirt or water in the fuel tank.

Refueling and Fuel Guidelines

Motorcycle Safety

● Carrying extra weight affects your

motorcycle’s handling, braking and stability.

Always ride at a safe speed for the load you

are carrying.

● Avoid carrying an excessive load and keep

within specified load limits.

2Maximum weight capacity P. 128

● Tie all luggage securely, evenly balanced and

close to the center of the motorcycle.

● Do not place objects near the lights or the

muffler.

WARNING

Overloading or improper loading can

cause a crash and you can be seriously

hurt or killed.

Follow all load limits and other

loading guidelines in this manual.

Operation Guide

Parts Location

Rear brake fluid reservoir (P72)

Battery (P64)

Main fuse (P105 )

Front brake fluid reservoir

(P72)

Front brake lever

Throttle grip (P82)

Engine oil fill cap (P65)

Engine oil filter (P67)

Rear brake pedal

Engine oil level inspection

window (P65)

Fuse box (P104 )

Operation Guide

Clutch lever (P79 )

Side stand (P74)

Shift lever

(P35)

Fuel fill cap (P36)

Crankcase breather (P83)

Drive chain (P75 )

Rear suspension spring

preload adjuster (P84)

Rear seat (P59)

Coolant reserve tank (P70)

Engine oil drain bolt

(P67)

Side cover (P61)

Air cleaner (P69)

Front seat (P60)

continued

Operation Guide

Tachometer

NOTICE

Do not operate the engine in the tachometer

red zone. Excessive engine speed can

adversely affect engine life.

Fuel gauge

Remaining fuel when only 1st (E) segment starts flashing:

approximately 0.74 US gal (2.8 liters)

Speedometer

If the fuel gauge indicator flash sequentially or turned off: (P91)

Tachometer red zone

(excessive engine rpm range)

Clock (12-hour display)

To set the clock: (P24 )

Instruments (Continued)

Operation Guide

Odometer [TOTAL] & Tripmeter [A/B] & Fuel mileage meter & Fuel consumption meter

SEL button selects the odometer, tripmeter A, tripmeter B, current fuel mileage, average fuel

mileage and fuel consumption.

uTo reset the tripmeter: (P22)

Tripmeter A Tripmeter B

Reserve fuel consumption (P23)

Current fuel

mileage

Average fuel

mileage

Fuel

consumption

Odometer

continued

Operation Guide

The average fuel mileage and fuel consumption will be based on tripmeter A.

• Current fuel mileage:

Current instant fuel mileage. If your speed is less than 5 mph (7 km/h), “ ” is

displayed.

When “ ” is displayed at speeds above 5 mph (7 km/h), go to your dealer for service.

• Average fuel mileage:

Average fuel mileage since tripmeter A was reset. When “ ” is displayed, see your

dealer for service.

• Fuel consumption:

Total fuel consumption since tripmeter A was reset. When “ ” is displayed, see your

dealer for service.

uTo reset the average fuel mileage and fuel consumption: (P22)

Instruments (Continued)

Operation Guide

❙

To reset the tripmeter, average fuel

mileage and fuel consumption

!aTo reset tripmeter A, average fuel mileage,

and fuel consumption together, press and

hold SET button.

!bWhen they are reset, “0.0” is displayed at

each indication.

!cThen, the display returns to the last selected

indication.

!dTo reset tripmeter B, press and hold SET

button with tripmeter B displayed.

Also, the tripmeter A, average fuel mileage,

and fuel consumption will automatically reset

by refueling more than the reserve amount

and riding your motorcycle for 0.06 mile (0.1

km).

You can activate or deactivate the automatic

reset mode by refueling. (P24)

Tripmeter A Average fuel

mileage

Fuel

consumption

or or

Tripmeter B

Operation Guide

continued

Reserve fuel consumption meter

When the 1st (E) segment of the fuel gauge

starts flashing, the odometer & tripmeter &

fuel mileage meter & fuel consumption

meter switches to the reserve fuel

consumption. You should refill the tank as

soon as possible.

Reserve fuel consumption meter

• Flashes from “0.0” gal (US gal) or L (liter).

uWhen the amount of consumed fuel is

more than 0.26 US gal (1.0 liter) the

display blinks faster.

uIf you change the display to odometer,

tripmeter, fuel mileage meter and fuel

consumption meter and so on (P20), it

will automatically return to the reserve

fuel consumption display if the buttons

are not pressed for about 10 seconds.

After refuelling more than the reserve

amount, the display returns to normal when

your motorcycle travel 0.06 mile (0.1 km).

Instruments (Continued)

Operation Guide

Display Setting

Press the SEL button to cycle through the setting

choices.

• Clock setting

• Backlight brightness adjustment

• Activating/deactivating of tripmeter A,

average fuel mileage and fuel consumption

automatic reset mode

• Changing of speed and mileage unit

• Changing of fuel mileage meter unit (only

when km unit system is selected)

Ordinary display

Clock setting

Setting Mode

Backlight brightness adjustment

Activating/deactivating of

tripmeter A, average fuel

mileage and fuel consumption

automatic reset mode

Changing of speed and

mileage unit

Changing of fuel mileage meter

unit (only when km unit system

is selected)

Press and hold SEL button and SET button

Press SET button

Operation Guide

continued

In addition, to return to the ordinary display

at display setting.

• The button is not pressed for about 30

seconds

• Turn the ignition switch off and then on

1 To set the clock:

!aTurn the ignition switch to ON.

!bPress and hold SEL button and SET button

until the hour digits start flashing.

!cPress SEL button until the desired hour is

displayed.

uPress and hold to advance the hour fast.

!dPress SET button. The minute digits start

flashing.

!ePress SEL button until the desired minute is

displayed.

uPress and hold to advance the minute

fast.

!fPress SET button. The clock is set, and then

the display moves to the backlight

brightness adjustment.

Instruments (Continued)

Operation Guide

2 Backlight brightness adjustment:

You can adjust the brightness five levels.

!aPress SEL button. The brightness is switched.

!bPress SET button. The backlight is set, and

then the display moves to the activating

deactivating of tripmeter A, average fuel

mileage and fuel consumption automatic

reset mode.

Operation Guide

continued

3 To activate/deactivate of tripmeter A,

average fuel mileage and fuel

consumption automatic reset mode:

You can also activate or deactivate the

automatic reset mode by refueling after 1st

(E) segment of the fuel gauge starts flashing.

Deactivation is initially set.

!aPress SEL button to select “ ” (activate) or

“ ” (deactivate) in the automatic reset

mode.

!bTo end the selection, press SET button.

The activation/deactivation of automatic

reset mode is set, and then the display

moves to the changing of the speed and

mileage unit.

Product specificaties

Merk:	Honda
Categorie:	Motor
Model:	CB500F (2013)

Heb je hulp nodig?

Als je hulp nodig hebt met Honda CB500F (2013) stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Motor Honda

Honda Shadow Phantom (2010) Handleiding

2 Februari 2025

Honda CL500A (2025) Handleiding

8 Januari 2025

Honda CBF125M (2024) Handleiding

8 Januari 2025

Honda X-ADV (2025) Handleiding

27 December 2024

Honda XL750 (2023) Handleiding

14 December 2024

Honda CB400 SUPER BOL D'OR (2011) Handleiding

14 December 2024

Honda Faze 250 (2012) Handleiding

14 December 2024

Honda Goldwing (2012) Handleiding

14 November 2024

Honda Goldwing (2020) Handleiding

14 November 2024

Honda Goldwing (2014) Handleiding

14 November 2024

Handleiding Motor

Nieuwste handleidingen voor Motor

Mash Six Hundred 650cc (2022) Handleiding

3 December 2024

Yamaha TRACER 9 (2025) Handleiding

26 November 2024

Yamaha XSR700 (2020) Handleiding

16 November 2024

Juki SC-510 Handleiding

16 November 2024

Bajaj Pulsar 250 Handleiding

15 November 2024

Bajaj Pulsar NS200 Handleiding

15 November 2024

Bajaj Dominar 400 Handleiding

15 November 2024

Hero Mavrick 440 (2024) Handleiding

14 November 2024

Yamaha YZ85 (2025) Handleiding

5 November 2024

Yamaha TT-R110E (2025) Handleiding

5 November 2024