HK Audio DSP Control Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor HK Audio DSP Control (34 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/34
Manual 1.2
DSP CONTROL
• Remote Operation Software
English:
> page 2
Deutsch:
> Seite 9
- 2 -
Manual 1.2DSP CONTROL
• Deutsch • English
Manual
Remote Operation Software
for the LINEAR and ELEMENTS Series
Content
1 Introduction ...........................................................................2
2 Network Center ......................................................................3
3 Unit Control ............................................................................ 4
The DSP CONTROL Panels
Network Center
Unit Control
1 Introduction
The network-compatible speakers of the LINEAR 5 MKII, LINEAR 7,
LINEAR 9 and ELEMENTS series can be operated via their rear
connection panel. For maximum fl exibility, however, remote
control is also possible with the DSP CONTROL software, which
provides access to DSP functions such as level, equalizer, delay,
limiter and also grouping.
If you wish to control a network-compatible speaker remotely,
use an Ethernet cable to connect it to the same network as
the computer running DSP CONTROL. Consult your network-
compatible speaker’s manual to learn more about this.
Software and Firmware Versions
Please make sure you have installed the proper software and
rmware before you start using DSP CONTROL. This manual covers
the following versions:
• DSP CONTROL software version 3.9.00_137455
Installing DSP CONTROL
Download the free DSP CONTROL software at www.hkaudio.com.
Be sure to stop by from time to time to check for more recent
versions.
DSP CONTROL runs on the following operating systems:
• Windows 10 or later
• MAC OS X 10.14 or later
Double-click the installation package to start installing DSP
CONTROL. An installation wizard will guide you through the
process.
If you run into any problems, please get in touch with your
dealership or mail us at support@hkaudio.com.
Launching DSP CONTROL
the program icon to launch DSP CONTROL.Double-click
The Network Center opens:
Firmware Update
Regularly check for a more recent version of the fi rmware for your
network-enabled speaker to take full advantage of the speaker's
functionality in conjunction with the DSP CONTROL software.
To update the firmware, please follow the steps listed.
Step 1:
Visit our website at www.hkaudio.com to download the latest
version of HK Audio DSP CONTROL. (This can be found in the
Downloads area for the HK Audio DSP CONTROL software).
Step 2:
Install HK Audio DSP CONTROL on your Windows (64 bit, Win
10) or Apple computer.
Step 3:
Connect your network-compatible HK Audio speaker to the
computers Ethernet port. We recommend connecting each
speaker individually to ensure a smooth update process. If
you want to update several speakers in a daisy chain wiring
scheme, we recommend updating all speakers individually
one after the other.
Step 4:
Open the HK Audio DSP CONTROL software.
You can now see the connected speaker in the Network Center
control panel. (For additional information on the control
panels, see point 3).


Product specificaties

Merk: HK Audio
Categorie: Niet gecategoriseerd
Model: DSP Control

Heb je hulp nodig?

Als je hulp nodig hebt met HK Audio DSP Control stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd HK Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd