Hitachi VT-FX695A Handleiding
Hitachi
Videorecorder
VT-FX695A
Lees hieronder de 📖 handleiding in het Nederlandse voor Hitachi VT-FX695A (8 pagina's) in de categorie Videorecorder. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
IMPORTANT
SAFEGUARDS
PRECAUTIONSDESCRIPTION
OF CONTROLS
PREPARATION
FOR USE
SETUPPLAYBACK
FUNCTION
RECORDING
FUNCTION
SPECIAL
FEATURES
TECHNICAL
SPECIFICATIONS
INSTRUCCIONES
EN ESPAÑOL
MAINTENANCE
TROUBLE-SHOOTING
GUIDE
– 1 –
OWNER S MANUAL’
VIDEO CASSETTE
RECORDER
If you need additional
operating assistance after
reading this owner's manual
or to order replacement
accessories, please call
TOLL FREE : 1-800-448-2244.
VT-FX695A
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear of the cabinet.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of suffi-
cient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instruc-
tions in the literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFEGUARDS
1. Read Instructions- All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions should be
retained for future reference.
3. Heed Warnings- All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be
followed.
5. Cleaning- Unplug this video product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and, that
for some specific reason, such as the possibility of the loss of an
authorization code for a CATV converter, is not intended to be unplugged
by the user for cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description otherwise
required in item 5.
6. Attachments- Do not use attachments not recommended by the video
product manufacturer as they may cause hazards.
7.Water and Moisture- Do not use this video product near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, and the like.
8. Accessories- Do not place this video product on an unstable cart,
stand, tripod, bracket, or table.The video product may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
video product. Any mounting of the appliance should follow
the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer. An
appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
9.Ventilation- Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the video product and to
protect it from overheating, and these openings must not be blocked or
covered.The openings should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface.This video product
should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions
have been adhered to .
10. Power Sources- This video product should be operated only from the
type of power source indicated on the marking label. If you are not sure
of the type of power supply to your home, consult your appliance dealer
or local power company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
11. Grounding or Polarization- This video product is equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other).This plug will fit into the power outlet only one way.This is
a safety feature.If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
12. Power Cord Protection- Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
13. Outdoor Antenna Grounding- If an outside antenna or cable system is
connected to the video product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with regard to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.(Fig. A)
14. Lightning- For added protection for this video product during a lightning
storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system.This will prevent damage to the video product due to lightning
and power-line surges.
15. Power Lines- An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
16. Overloading- Do not overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.
17. Object and Liquid Entry- Never push objects of any kind into this video
product through any openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock. Never
spill liquid of any kind on the video product.
18. Servicing- Do not attempt to service this video product yourself as
opening or removing covers may expose you to dangerous voltage or
other hazards.Refer all servicing to qualified service personnel.
19. Damage Requiring Service- Unplug this video product from the wall
outlet and refer servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the video product to its normal operation.
e. If the video product has been dropped or damaged in any way.
f. When the video product exhibits a distinct change in performance-this
indicates a need for service.
20. Replacement Parts- When replacement parts are required, be sure the
service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other
hazards.
21. Safety Check- Upon completion of any service or repairs to this video
product, ask the service technician to perform safety checks to
determine that the video product is in proper operating condition.
22. Heat- This video product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND
CLAMP
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
S2898A
PRECAUTIONS DESCRIPTION
OF CONTROLS
EN
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU’AU FOND.
1. POWER button
2. NUMBER buttons
3. TAPE SPEED button
4. MENU button
5. DISPLAY button
6. REW button
7. STOP button
8. REC button
9. MODE SELECT buttons
10. VCR/TV button
11. CH button
12.
VOL
button
13. MUTE button
14. PLAY button
15. F.FWD button
16. SLOW button
17. PAUSE/STILL button
18. SEARCH MODE button
19. COUNTER/MEMORY button
20. EXIT/RESET button
( )
19. AC Power Cord
20. AUDIO OUT jacks
21. AUDIO IN jacks
22. ANT. IN jack
23. VIDEO OUT jack
24. VIDEO IN jack
25. CH3/CH4 selector switch
26. ANT. OUT jack
Front Panel
Display Window
VIDEO-IN AUDIO-INL R CHANNEL
REC/IRT REW F.FWD
PLAYSTOP/EJECT
TRACKING
10 7 689
POWER
11
1
12
2 3 4 5
14
15
16
17
18
13
Remote Control
POWER
1 2 3
4 5 6
7 8 9
+1000
TVVCR
REW
PLAY
STOP F.FWD
PAUSE
CH
SEARCH MODE
DISPLAYMENU
TAPE SPEED
1
2
5
4
3
6
8
18
19
17
7
15
14
11
12
13
REC
SLOW
16
CATV
VCR/TV
9
MUTE
ENTER
VOL
RESET
EXIT COUNTER
MEMORY
10
20
Rear Panel
19 20 21 22
23 24 2625
ANTAUDIO
VIDEO
IN
OUT
OUT IN
CH3 CH4
OUT
L
R
IN
INSTALL LOCATION
For safety and optimum performance of your VCR:
• Install the VCR in a horizontal and stable position.
• Do not place anything directly on top of the VCR.
• Do not place the VCR directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes
on the sides of the VCR. Avoid locations subject to
strong vibration or strong magnetic fields.
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on your VCR, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the VCR
cassette holder.
MOISTURE CONDENSATION WARNING
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating
a cold room or under conditions of high humidity. Do not
use the VCR at least for 2 hours until its inside is dry.
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modification is made.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized recording or use of broadcast television
programming, video tape, film or other copyrighted material
may violate applicable copyright laws. We assume no
responsibility for the unauthorized duplication, use, or other
acts which infringe upon the rights of copyright owners.
A NOTE ABOUT RECYCLING
This product's packaging materials are recyclable
and can be reused. Please dispose of any materials
in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated
but disposed of in accordance with your local
regulations concerning chemical wastes.
Note to the Cable TV System Installer:
This reminder is provided to call the Cable TV system
installer’s attention to Article 820-40 of the National
Electrical Code, which provides guidelines for proper
grounding – in particular, specifying that the cable ground
shall be connected to the grounding system of the
building, as close to the point of cable entry as possible.
Install two AA
batteries matching
the polarity indicated
inside the battery
compartment.
1. Cassette Compartment
2. REW button
3. STOP/EJECT button
4. PLAY button
5. F.FWD button
6. REC/IRT button
7. CHANNEL button
8. Display Window
9. Remote Sensor
10. POWER button
11. AUDIO Input jacks
12. VIDEO Input jack
( )
13. PWR. indicator
14. TAPE IN indicator
15. VCR indicator
16. REC indicator
17. TIMER indicator
18. CLOCK indicator
PRECAUTIONS DESCRIPTION OF CONTROLS
To insert the batteries
– – 2
PREPARATION
FOR USE
SETUP
– – 3 EN
4Select the On Screen Language ("ENGLISH"
or "ESPAÑOL")
by pressing [PLAY B] or [STOP C]. Then, press
[F.FWD g].
5Begin channel preset
by pressing [F.FWD g] once.The tuner scans
and memorizes all active channels in your area.
• The VCR distinguishes between standard TV
channels and cable channels.
6After scanning,
the tuner stops on the lowest memorized channel. The TV
screen returns to TV mode.
• If "AUTO SET UP" appears on the TV screen again, check
the cable connections. Press [F.FWD] once again and the
VCR will begin preset again.
• If the VCR cannot find the local PBS channel at step 1, after
scanning channels, “AUTO CLOCK”flashes on the TV
screen. And the VCR search the local PBS channel for auto
clock setting again.When the clock is not set yet, press the
POWER button to turn on the VCR, then press the number
buttons or [CH ] to select your local PBS channel.The
current time may appear on the display. If current time does not
appear, follow “MANUAL CLOCK SETTING”.
• Note: The VCR will search through all the available channels
from the lowest channel. It must scan each channel for 10
seconds to determine if that channel is transmitting the EDS
(Extended Data Service) signal. If the highest channel has
EDS signal, it takes many times. To cancel this search, press
the RESET/EXIT button.
( )
ACCESSORIES PART NO.
Coaxial Cable 5857952
Remote Control Unit HL11331
Batteries AA x 2
1 Check contents
Make sure the package contains all of the accessories
listed in "as below".
2 Situate VCR
Place the VCR in a stable, horizontal surface.
3 Connect VCR to TV
SUPPLIED ACCESSORIES
VCR to AV TV connection using AUDIO/VIDEO Cables
VCR to TV Connection
1. Disconnect the AC power cord of the TV from the AC outlet.
2. Disconnect the antenna or cable from the TV.
3. Connect the antenna or cable to the ANT. IN jack of the
VCR.
4. Connect the VCR to the TV using the coaxial cable.
5. Plug the AC power cords of the VCR and TV into the AC
outlets.
OUT
IN
ANT
[VHF/UHF
combination antenna] [Back of the VCR]
IN OUT
[Cable box or satellite box]
OR
[Indoor antenna] [Back of the
UHF/VHF combination TV]
UHF/VHF
Coaxial cable
(supplied)
From Cable or
Satellite Company
OR
If your TV does not have A/V terminals:
When the VCR is in the Playback mode or when the VCR is
in the VCR mode, your TV will receive signals from the VCR
on either channel 3 or 4. To use the VCR with your TV, set
the selector switch to CH3 or CH4 (which is located in the
back of your VCR), whichever is
not used for normal broadcasts in
your area. Then set your TV to
the same channel.
CH3
OUT
CH3 CH4 CH4
[Back of the VCR]
You can automatically program the tuner to scan only the
channels you receive in your area.
•
Channel memory programming is NOT needed when you
connected the VCR to a cable box or satellite box as in
"Connect VCR to TV". In this case, select the VCR and TV to
channel 3 or 4 the same channel as the CH3 or CH4 switch
on the back of the VCR. Then, the channel you want to
record or view may be selected at the cable box or satellite
box.
•
Follow the steps below once. Repeat it only if there is a
power failure or if the VCR is unplugged for more than 30
seconds. (In these cases, the programmed channels are
erased.)
• You must follow the steps below before attempting to play
or record a video tape. If you want to play or record a
video tape BEFORE programming the tuner, you can
cancel it by pressing [EXIT/RESET].
1You need to connect the antenna or cable to the VCR
first. Then, connect the VCR power plug into a standard
AC outlet.
• Whenever the AC plug is connected, the VCR search
the local PBS(Public Broadcasting Station) channel for
auto clock setting. If the VCR find the local PBS
channel, current time appears on the display.
2Turn on the TV and set the TV to channel 3 or 4.
Now set the CH3/CH4 switch on the back of the VCR to match
the channel selected on the TV.
3Turn on the VCR by pressing [POWER]. The PWR. and VCR
indicators will both appear in the display window.
AUTOMATIC CHANNEL SET UP
AUTO SET UP
CH 01
Using AUDIO/VIDEO Input Jacks
You can use the A/V input jacks on the front or the back of
the VCR.
• To use the input jacks on the back of the VCR, select
"L1" position by pressing [0], [0], [1] on the remote
control or [CH ].
• To use the input jacks on the front of the VCR, select
"L2" position by pressing [0], [0], [2] on the remote
control or [CH ].
( )
( )
“ ” “ ” L1 or L2 is found
before the lowest
memorized channel.
(Example: CH2)
[Playing VCR]
[TV A/V]
Audio/Videocables
(not supplied)
IN
AUDIO
L R
VIDEO
VIDEO
L
R
OUT IN
OUT IN
AUDIO
PREPARATION FOR USE
SETTING THE CH3/CH4 SWITCH
SETUP
Using Optional AUDIO/ VIDEO Output Jacks
With this connection, you can get better pictures and
sounds when playing back a tape if your TV has A/V Input
jacks. Please refer to your TV’s owner’s manual.
Product specificaties
| Merk: | Hitachi |
| Categorie: | Videorecorder |
| Model: | VT-FX695A |
Heb je hulp nodig?
Als je hulp nodig hebt met Hitachi VT-FX695A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Videorecorder Hitachi
8 Juni 2023
24 April 2023
19 April 2023
19 April 2023
18 April 2023
10 April 2023
6 April 2023
2 April 2023
30 Maart 2023
25 Maart 2023
Handleiding Videorecorder
- Videorecorder Bosch
- Videorecorder Philips
- Videorecorder Sony
- Videorecorder Samsung
- Videorecorder Panasonic
- Videorecorder Canon
- Videorecorder Daewoo
- Videorecorder Grundig
- Videorecorder JVC
- Videorecorder Motorola
- Videorecorder Medion
- Videorecorder Toshiba
- Videorecorder A.C.Ryan
- Videorecorder Abus
- Videorecorder Acti
- Videorecorder Airlive
- Videorecorder Aiwa
- Videorecorder Aristona
- Videorecorder Axis
- Videorecorder Blaupunkt
- Videorecorder D-Link
- Videorecorder Digitus
- Videorecorder Elro
- Videorecorder Ezviz
- Videorecorder Foscam
- Videorecorder GeoVision
- Videorecorder Grandstream
- Videorecorder Hikvision
- Videorecorder LevelOne
- Videorecorder Linksys
- Videorecorder Magnavox
- Videorecorder Magnum
- Videorecorder Monacor
- Videorecorder Navitel
- Videorecorder Provision ISR
- Videorecorder QNAP
- Videorecorder Seagate
- Videorecorder Skytronic
- Videorecorder Sylvania
- Videorecorder Synology
- Videorecorder Technaxx
- Videorecorder Tenda
- Videorecorder TP Link
- Videorecorder Trendnet
- Videorecorder Vivotek
- Videorecorder Zoom
- Videorecorder Kunft
- Videorecorder Ubiquiti Networks
- Videorecorder Imou
- Videorecorder Tripp Lite
- Videorecorder Planet
- Videorecorder DataVideo
- Videorecorder Dahua Technology
- Videorecorder UniView
- Videorecorder Reolink
- Videorecorder Blackmagic Design
- Videorecorder Moxa
- Videorecorder Digital Watchdog
- Videorecorder AVer
- Videorecorder DirecTV
- Videorecorder Speco Technologies
- Videorecorder Hanwha
- Videorecorder Inkovideo
- Videorecorder Ernitec
- Videorecorder HiLook
- Videorecorder Mach Power
- Videorecorder Avigilon
- Videorecorder Milesight
Nieuwste handleidingen voor Videorecorder
15 November 2024
15 November 2024
15 November 2024
2 November 2024
23 September 2024
30 Juli 2024
16 Juli 2024
8 Juli 2024
8 Juli 2024
10 Juni 2024