Hitachi UT42V702 Handleiding

Hitachi LCD televisies UT42V702

Lees hieronder de 📖 handleiding in het Nederlandse voor Hitachi UT42V702 (54 pagina's) in de categorie LCD televisies. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/54

Operating Guide

Model Name

UT37V702

UT42V702

Record the serial number of your monitor for future reference.

SERIAL NO.

This serial number is located on the back and right side of the monitor.

ANY QUESTION ABOUT THIS PRODUCT PLEASE CONTACT 800-Hitachi

READ THE ENCLOSED INSTRUCTIONS CAREFULLY.

KEEP THIS OPERATING GUIDE FOR FUTURE REFERENCE.

™

UltraVision HDTV Monitors

1.5" UltraThin Liquid Crystal Display

Anthracite Pearl Crystal Frame

1920 x 1080p 120Hz PictureMaster™ VI with Reel 120™

(1) HDMI™ (V.1.3 with CEC) Input; (1) RGB D-sub15 Input with Audio

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ...........02

INTRODUCTION..............................................04

About This Manual .................................................... 04

Trademark Credits .................................................... 04

Software.................................................................... 04

Features.................................................................... 04

SAFETY PRECAUTIONS .................................05

Explanation of the Symbols ...................................... 05

Cleaning and Maintenance ....................................... 08

Main Unit Installation ................................................ 09

Anti-tumble Measures ............................................... 09

Child Safety Notice .................................................. 10

Wall Mount Setup ..................................................... 11

Floor Stand Setup ..................................................... 12

QUICK START GUIDE .....................................13

1. Supplied Accessories (including option) ............... 13

2. Connection............................................................ 13

3. Insert the Batteries into the Remote Control......... 14

4. Power On .............................................................. 14

5. Language Selection .............................................. 14

COMPONENT NAMES .....................................15

Main Unit................................................................... 15

Remote Control......................................................... 16

PREPARATION ................................................17

Remote Control Battery Installation .......................... 17

Handling the Remote Control ................................... 17

Caution When Moving the Main Unit ........................ 17

CONNECTION .................................................18

1. Connect Power Cord to the Rear Panel ............... 18

2. Connect your Equipment to the Monitor ............... 18

Connecting to Equipment Having

HDMI or DVI Output Terminals ....................... 18

Connecting to Equipment Having

Video Output Terminals ................................... 19

Connecting to a PC ............................................ 20

3. Attach Cushion, Secure with Clamps and Fit

Terminal Cover ...................................................... 20

4. Connect the Power Plug into the Wall Socket ...... 21

BASIC OPERATION .........................................22

Power On/Off ............................................................ 22

Volume Up/Down ...................................................... 23

Mute .......................................................................... 23

Input Switching to HDMI and RGB ........................... 24

Input Signal Screen Display...................................... 24

SETUP OPERATION ........................................25

How to Use the Remote to Control your

External Devices

....................................................... 25

Remote Control Codes ............................................. 29

How to Use the On-Screen Display (OSD) System

... 31

Select Language ....................................................... 31

Main Menu List ......................................................... 32

Watching Images from HDMI/Composite Input ........ 33

Setting Picture Adjustment .................................... 33

Reducing Noise ..................................................... 35

Making the Moving Image Smooth ........................ 36

Advanced Setting .................................................. 37

Viewing Images from a PC ....................................... 38

Setting Picture Adjustment .................................... 38

Advanced Setting .................................................. 39

FUNCTION ......................................................40

Aspect Switching ...................................................... 40

HDMI/Composite Signal Input ............................... 40

Display Aspect ................................................... 40

Position Adjustment ........................................... 41

RGB Signal Input................................................... 41

Display Aspect ................................................... 41

Power Save Mode .................................................... 42

When HDMI/Composite Input is Selected ............. 42

When RGB Input is Selected................................. 42

TROUBLESHOOTING ......................................43

About LCD Display Technology ................................ 43

When the Following Messages Appear

on the Screen ........................................................... 43

Symptom and Checklist ............................................ 43

PRODUCT SPECIFICATIONS ..........................46

Signal Input ............................................................... 47

Recommended Signal List ........................................ 48

Dimensions ............................................................... 49

SERVICE INFORMATION ................................51

LIMITED WARRANTY .....................................52

END USER LICENSE AGREEMENT .................53

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI LCD MONITOR

Our reputation has been built on the quality, performance, and ease of service of Hitachi LCD Monitors.

Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this

section illustrates safety tips which will be of benet to you. Please read it carefully and apply the knowledge you obtain

from it to the proper operation of your Hitachi LCD Monitor.

Please ll out your warranty card and mail it to Hitachi. This will enable Hitachi to notify you promptly in the improbable

event that a safety problem should be discovered in your product model. Model and serial numbers are indicated on

back side and right side of the LCD Monitor.

The lightning ash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of a sufcient

magnitude to constitute a risk of electric shock to a person.

The exclamation point within an equilateral triangle, is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

READ BEFORE OPERATING EQUIPMENT

Follow all warnings and instructions marked on this LCD

Monitor.

Read these instructions.1.

Keep these instructions.2.

Heed all warnings.3.

Follow all instructions.4.

Do not use this apparatus near water.5.

Clean only with a dry cloth.6.

Do not block any ventilation openings. Install in 7.

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, 8.

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

Do not defeat the safety purpose of the polarized or 9.

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The

wide blade or the third prong are provided for your

safety. If the provided plug does not t into your

outlet, consult an electrician for replacement of the

obsolete outlet.

Protect the power cord from being walked on 10.

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

Only use the attachments/accessories specied by 11.

the manufacturer.

Use only with the cart, stand, tripod, 12.

bracket, or table specied by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

Unplug this apparatus during lightning storms or 13.

when unused for long periods of time.

Refer all servicing to qualied service personnel. 14.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Monitors and Televisions are designed to comply with 15.

the recommended safety standards for tilt and stability.

Do not apply excessive pulling force to the front, or

top, of the cabinet which could cause the product to

overturn resulting in product damage and/or personal

injury.

Follow instructions for wall, shelf or ceiling mounting 16.

as recommended by the manufacturer.

An outdoor antenna should not be located in the vicinity 17.

of overhead power lines or other electrical circuits.

If an outside antenna is connected to the receiver and 18.

the monitor be sure the antenna system is grounded so

as to provide some protection against voltage surges

and built up static charges. Section 810 of the National

Electric Code, ANSI/NFPA No. 70-1984, provides

information with respect to proper grounding for the

mast and supporting structure, grounding of the lead-

in wire to an antenna discharge unit, size of grounding

connectors, location of antenna discharge unit,

connection to grounding electrodes and requirements

for the grounding electrode.

NOTE

To the CATV system installer: This reminder is provided to

call the CATV system installer’s attention to Article 820-44

of the NEC that provides guidelines for proper grounding

and, in particular, species that the cable ground shall

be connected to the grounding system of the building, as

close to the point of cable entry as practical.

Product specificaties

Merk:	Hitachi
Categorie:	LCD televisies
Model:	UT42V702
Kleur van het product:	Zwart
Gewicht:	- g
Breedte:	- mm
Diepte:	- mm
Hoogte:	- mm
Beeldschermdiagonaal:	42 "
Resolutie:	1920 x 1080 Pixels
Oorspronkelijke beeldverhouding:	16:9
Helderheid:	- cd/m²
Aantal HDMI-poorten:	1
Bevestigingsmogelijkheid voor kabelslot:	Nee
Gemiddeld vermogen:	12 W
Hoofdtelefoonuitgangen:	1
HD type:	Full HD
Display technologie:	LCD
Responstijd:	- ms
Beeldverhouding:	16:9
Geïntegreerde TV Tuner:	Nee
Ingebouwde camera:	Nee
Productontwerp:	Digitale signage flatscreen